Used Roche Lightcycler Ii Thermal Cycler Parts Only for sale (23,105)

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Nwedpfx Aaovgcpvsaef Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, Nedpfx Aaoyll Txjaewf

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, Nwjdpfx Asylbpvjaaof ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Njdpfx Asudz D Uoaaswf Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, Description Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. After completing the cleaning process, the device switches off automatically. Advantage Nsdpohvzy Asfx Aaaswf 1 pump arranged horizontally 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, sprocket drive via separate motor intake filter in front of the pump shaft high injection pressure steam extraction stainless steel screen with filter basket water indicator Technical data Tank capacity 85 l Basket diameter 780 mm Capacity 150 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1130x1010/1220x1150/1730 mm Weight 90 kg Heizleistung 4 kW Spray rate 4800 l/h Material Stainless steel Power supply 4,8 kW/ 400 V/ 50 Hz Pumpendruck 3,1 bar

Condition: excellent (used), Year of construction: 2018, turning length: 565 mm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, CNC Lathe with c-axis Okuma - LB3000EX-II MACH-ID 9471 Make: Okuma Type: LB3000EX-II Control: OSP-P300LA Year: 2018 Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Nsdpfoywurpex Aaaewf Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Dear customers, We are offering an automation system with very high-quality built-in components and robots. We are sure that some of you may need these parts and we will find a fair price for everyone. Nedpfxou Rqm Ue Aaaewf With best regards Nick Schönfeld

Condition: repair required (used), Location: 49838 Langen Njdouqy Tpepfx Aaaewf

Condition: used, mileage: 447,500 km, power: 330 kW (448.67 HP), first registration: 11/2018, fuel type: diesel, overall weight: 23,900 kg, axle configuration: 3 axles, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Load capacity: 15,811 kg * Width: 2,550 mm * Length: 6,410 mm * Curb weight: 8,089 kg * Tire size | First axle: 315/70 R22.5 * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Tire size | Second axle: 235/75 R17.5 * Tire size | Third axle: 315/70 R22.5 * Tire tread depth outer left | Third axle: 30% * Tire tread depth inner left | Second axle: 20% * Tire tread depth inner left | Third axle: 30% * Tire tread depth outer right | Third axle: 30% * Tire tread depth inner right | Second axle: 20% * Tire tread depth inner right | Third axle: 30% * Wheelbase: 405 cm * Fuel tank capacity: 850 l * Payload: 15,811 kg * Position | First axle: Front * Suspension | First axle: Parabolic spring * Alloy wheels | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Third axle: Disc brakes * Differential lock | Third axle: Yes * Alloy wheels | Third axle: Yes * Cabin: Yes * Brake type | First axle: Disc brakes * Steering | First axle: Yes * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Third axle: Single reduction * Lift axle | Second axle: Yes * Twin tires | Third axle: Yes * Driven | Third axle: Yes Additional features: * Adaptive cruise control Nwsdpfx Aaowyh Iijaef * Alcoa rims * Aluminum fuel tank * Anti-lock braking system (ABS) * Traction control * Automatic transmission * Automatic air conditioning * Heated mirrors * Hill start assist * Brake booster * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Stability Program (ESP) * Low-noise * Speed limiter * Cruise control * Homepage * Air conditioning * Refrigerator * Alloy wheels * Air suspension * Air-suspended seats * Air horn * Fog lights * Emergency brake assist * Parabolic suspension * Particulate filter * Disc brakes * Sleeper cab * SemCollection * SemStars * Spoiler * Auxiliary heating (parking heater) * Immobilizer * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures required for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Manuals available Ready to ship worldwide Njdpfxjyg Nluj Aaaowf Export documentation available Request additional images and videos via Whats App

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) Nsdpfx Aaeyxcqvoaowf - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, MAJA Belt Skinning and Membrane Removal Machine Model: Vario II Nwjdpfsy Eg Ewjx Aaaef Fully functional Year of manufacture: 2005 Shipping possible

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Nedpoyk Uimjfx Aaajwf Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter Nwodpfxjylkgqe Aaasf 3-jaw chuck (Kitagawa B212)

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Nwodpfx Ajyk Tbhjaasf Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Nwodpfxoylhmue Aaaef Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: used, mileage: 158,894 km, power: 235 kW (319.51 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 16,960 kg, maximum load weight: 9,040 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,300 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, operating hours: 158,894 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, truck registration, Reference number for inquiries: 69738 Mercedes-Benz 2532 * Year of manufacture: 2015 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric window lifters * Air conditioning * Air suspension * Lift axle * Cruise control * PTO (Power Take-Off) Nwsdpfewwqm Nox Aaajf * Differential lock * Low noise emission * Local/urban distribution > 7.5 t * Trailing steering axle * Electric windows and mirrors * Remote central locking * Lane departure warning system * Transmission: Automatic * Suspension: Leaf/Air * Gross weight: 26,000 kg * Unladen weight: 16,960 kg * Payload: 9,040 kg * Permissible total weight: 26,000 kg * Tire condition, 1st axle: 30% -- 60% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 30%|30% -- 30%|30% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30% - Tire size: 315/80 R22.5 * Wheelbase: 4,300 mm * Tire sizes: 315/80 R22.5 * Superstructure: Faun Powerpress II 524 * Zöller Delta 2301 bin lift * 3 seats * Central lubrication system * On request, we are happy to send you a video or additional photos Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Order of export / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV-inspection, registration service * Transfer/delivery of commercial vehicles Contact our experienced staff – we will be pleased to advise you.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Saw blade diameter: 290-300 mm Saw blade speed: 4750 rpm Motor power: 4.5/5.5 kW Motor speed: 2880 rpm Max. cutting width: 5300 mm Max. cutting height: 2100 mm Nwodpfx Aasy Dkg Noasf Max. panel height: 2200 mm Max. processing thickness: 80 mm Small parts support: Yes Transport dimensions approx. 7000 x 2000 x 2600 mm Weight approx. 1000 kg Availability: short-term Location: Röllbach

Condition: excellent (used), 1m wide OptiFlour II. Bought new in 2022 and only used for a few months. Almost as brand new condition. Matching OptiAir dust extractor available at extra cost. Nodpfx Aajv E S Ncoaswf

Condition: excellent (used), Year of construction: 2013, CNC Lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of manufacture: 2013 Internal machine no.: 18 Nsdpfx Aasylh Sdoaowf Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: VDI 40 Equipment: Chip conveyor Touchsetter OneTouch IGF NC tailstock 3-jaw power chuck Forkardt 3QLC/K250

Condition: used, functionality: fully functional, This offer is for a used ‘Konica Minolta AccurioPress C2070’ colour production system Nedpfeyxdq Rex Aaaewf Items included: 1 x Konica Minolta AccurioPress C2070 with the following equipment: incl. PF-707m paper deck incl. FS-532 finisher Incl. Booklet Finisher SD-513 Incl. RU-509 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 463,710 pages Colour: Approx. 292,654 pages Black: Approx. 171,056 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Njdpfey Amflox Aaajwf

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Nwedjyna Uiepfx Aaaof A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Nedpfx Aevth Aueaaewf

Condition: used, Year of construction: 1991, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Nwjdpfx Aaoy A Hknoaef Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg