Used Pie Press for sale (13,317)

Condition: good (used), Press force 35 tons Bending length 1200 mm Frame width 2600 mm Gedpfxsw Hx Rns Ahmjbr Controlled axes Y1, Y2, X axis Control Elgo P8822

Condition: excellent (used), Brand: MVD Model: D320-3700 Gbjdpjw Hx S Sjfx Ahmsr Tonnage: 320 Tons Working width: 3700 mm Year of manufacture: 2021 Stroke: 410 mm Installation height: 615 mm Throat depth: 510 mm Controlled axes: Y1, Y2 and X+R+Z1+Z2+X5 axis Distance between uprights: 3200 mm Approach speed Y-axis: 210 mm/sec Control: Delem DA69T Safety: DSP Laser Safe Upper tool clamping: Wila NSCL hydraulic clamping Lower tool clamping: Wila NSCR hydraulic clamping and crowning

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Gjdpjv Tp D Hofx Ahmjbr Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 2009, operating hours: 93 h, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation system, Ink unit temperature control, Anicolor inking units, Double sheet detection, Side guide control, Blanket washer, Roller washer, Impression cylinder washer, Autoplate system, IR dryer, Extended delivery. Gedpfx Aeznl T Ashmjbr

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Profile height max. 140 mm Stanzhöhe max. 93 mm Punching hub: 15 mm Presskraft 45 kN Gbedpfx Aezrmcmshmor Weight approx. 280 kg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Gbsdpfxoztmx De Ahmsr Drive motor 55 kw

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Gbodpfexwmuasx Ahmjr Year of manufacture: 2006 Condition: used Operating hours NC hours: 70,305 h Beam-on hours: 17,217 h Control: Siemens Sinumerik 840 D Punching force: 220 kN Laser power: 2700 W Working area, laser operation approx.: 2585 x 1280 mm Working area, punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support table, brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate drive with integrated linear magazine, 21 positions for tools and clamping elements 1 clamping element Maintenance-free three-phase servo motors Part eject chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick-change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono-tool holder, 360° rotation Programmable stripper Tool spray lubrication Punch slug extraction Control: Sinumerik 840D 10.4″ TFT color display Teleservice Automatic shutdown 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Rapid shutdown, hydraulics Compact dust extraction system Options: Automatic shutdown Threading former Softpunch Adaptive stroke calibration Follow-up cylinder Individually opening clamps Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (parallel loading and unloading) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreader magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Pressing force: 30 tons Maximum pressure: 374.6 bar Cylinder stroke: 160 mm System capacity: 1.65 liters Fixed cylinder Gedpfxozivkzs Ahmsbr Working width: 565 mm Weight: 165 kg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Stroke: 240 mm Overhang: 150 mm Gedpfjzi A I Tjx Ahmobr Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Gsdpjwyuqkefx Ahmebr Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Gjdpfoztvwiox Ahmebr Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: good (used), Used machine, good condition. Delivery time appr. 7-8 weeks after ordering *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws Gbodpfxefmqq Es Ahmer PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Gbjdpfx Ajx Ihufehmor Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, We are selling two identical chamber filter presses in stock. Both have been completely overhauled and are therefore in new condition. Available immediately! Photos can be found in the attachment: Chamber filter press – Manufactured by MSE with plate thickness: 50mm each with a second set of plates cake thickness: 25mm volume: approx. 210 l usable length approximately 1800mm (34 plates) Godpozt Nc Eefx Ahmjbr format: 630x630 mm open filtrate discharge plate transport manual hydraulics electric Please let us know if you are interested in this press.

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality vacuum membrane press from Columbus Presstechnology. Type: Multimat Sonder Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is immediately ready for operation. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / Condition: Fully functional and ready for use Robust industrial design Membrane included (used but functional condition) User-friendly controls Ideal for woodworking, furniture, or plastics processing Applications: Gedpfx Aoy I Uguehmebr Veneering Foil lamination Mold making / plastics processing Prototype production Inspection is possible – the machine is ready for use.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit Gbjdpfxoztdcae Ahmer heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm Gbsdpfx Aoztdbpshmor The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW Gbjdeztda Sepfx Ahmjr heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Gbjdpfxjztda Ej Ahmjr Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Gjdjwhcmpspfx Ahmebr Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: used, Three second-hand swivelling clamping shoes from Schafberger + Sprödhuber (S+S) for frame presses used in professional woodworking. They are used to align and securely clamp workpieces when assembling frames and structures. Gbjdpfxeztniwe Ahmer Technical data: - Dovetail width: ~ 58 mm

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Gode E Dquspfx Ahmobr Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system Gbodpfowd I Svox Ahmsr CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: used, Year of construction: 1994, Used Machine Year of Manufacture: 1994 Features and Technical Specifications: - 21-spindle vertical boring mill - 3-spindle horizontal drilling machine - Pneumatic drilling feed - Pneumatic workpiece clamps Gbodpfx Asztfudehmsr - Pneumatic maintenance unit with pressure gauge and pressure regulator - Swiveling horizontal drilling unit with height adjustment - Adjustable side stops - Extension rulers on the left and right - Multiple adjustable stop blocks - Drilling depth adjustment - Mobile base with drawers - Comprehensive set of wood drill bits - Various stop gauges and adjustment aids - Protective shield on the vertical drilling unit - Vertical drilling unit: 21 drill spindles - Horizontal drilling unit: 3 drill spindles - Motor power: 1.1 kW - Power connection: 3 × 380 V / 50 Hz - Fuse rating: max. 6 A slow-blow - Compressed air: min. 5.5 bar - Air consumption: approx. 50 l/min - Max. operating pressure: 6 bar - Machine table: 870 × 330 mm - Machine width without extension guide: 870 mm - Machine width with extension guide 1: 2,720 mm - Machine width with extension guide 2: 4,720 mm - Machine depth: 1,270 mm - Machine height: 750 mm (Dimensions without base) - Weight: 122 kg

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide Gsdoxfwdjpfx Ahmjbr CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear