Used Mondomix Mondomix Aerator A05 Minimondo Buhler for sale (171)

Year of construction: 1995, condition: good (used), Item: M-2068-Collette-CVC50 Dedpfx Ash Dbvtsbzjwa Mixer and aerator unit Manufacturer: Collette (GEA) Model: Converticoll CVC 50 Year of manufacture: 1995 For mixing and aerating dairy or confectionery products.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: Dwedpfx Abjy Ii Dzszoa A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Djdpfx Abeu E E Ezezowa

Condition: good (used), Year of construction: 1993, TONELLI UNIVERSAL 2000 | Industrial Planetary Mixer (Pastry Mixer) Manufacturer: TONELLI S.p.A. Model / Type: UNIVERSAL 2000 (Type: U 3000) Serial Number: 12 Year of Manufacture: 1993 Power Supply: 380 V | 3 Ph | 50 Hz Controller Power Supply: 220 V / 50-60 Hz Bowl Capacity: 120 l Internal Control: Tonelli MP-DC TOP 99 power supply module (No. 333) Dwedjzgx Auepfx Abzoa WITHOUT BOWLS, WITHOUT TOOLS, WITHOUT MOTOR The Italian brand TONELLI is an undisputed global leader in the production of high-performance, industrial planetary mixers. The UNIVERSAL 2000 model, configured for 120 liters, is a legendary design dedicated to large bakeries, confectionery plants, and food processing factories. These machines are renowned for their unique, patented planetary system, which guarantees perfect aeration of doughs, precise kneading of heavy doughs, and consistent texture of creams, sponge cakes, and meringue bases. The machine's construction is based on a monolithic body, completely enclosed with stainless steel panels, ensuring full compliance with HACCP and IFS hygiene standards. The unit has an integrated internal lubrication system (a detailed maintenance diagram is visible on the nameplate), which greatly facilitates daily technical servicing during continuous operation.

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Dwodpfxjy Nm I Hs Abzsa Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Year of construction: 2007, condition: used, Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C. Additional title: wort cooler Dwodpfx Abow Uczrozoa Wort cooler capacity approx: 10 hl/h Content water: 4 l Content wort: 4 l Max. pressure: 10 bar Weight: 165 kg Material: stainless steel Position: premounted on frame Features: splash guard, plate heat exchanger, aeration via Venturi jet

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Dwodpfxsvcqtzo Abzsa Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Year of construction: 2019, condition: used, consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beerpump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks Cast out wort: 500 l Dsdpfjvcqk Hjx Abzewa Capacity wort cooler: 750 l/h Wort cooling time: 40 min. Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301 Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame. Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermenting vats, 8 storage tanks with temperature control, pumps, hoses, bottle- and can-filler, bottle-washer, ice water tank, steam generator

Condition: used, Year of construction: 2004, Kieselguhr settling tank with 4.45 m³ capacity Additional title: KG settling tank Content: 4450 l Max. working pressure: 80 °C Length: 1710 mm Width: 1710 mm Height: 3550 mm Weight: 450 kg Material: stainless steel 1.4301 Position: vertical cylindro-conical tank Dedpow Uc Thsfx Abzewa Base construction: on pipe feet Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Dedpfx Absw T St Uozewa Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: used, Year of construction: 1979, Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, 2 tanks for yeast propagation each: 80 hl total volume 2 tanks for yeast storage each: 80 hl total volume Material: stainless steel Dwsdevcqkgepfx Abzea Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework Dedpfxjxwyzas Abzswa

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Dsdpox Nugdofx Abzewa Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: used, Year of construction: 2004, The Polar PW-1 Pileturner, manufactured in 2004 with serial number 74M1003, is a robust and efficient solution for handling paper stacks in professional print environments. With a maximum sheet size of 52 x 74 cm, it is designed to simplify the turning, aerating, and aligning of piles, ensuring smooth downstream processing. The machine features tub dimensions of 525 x 840 mm, with an adjustable opening range from 470 mm to 1,255 mm, providing flexibility for different pile heights. Capable of handling a maximum pallet weight of 500 kg, the PW-1 combines strength with precision to optimize workflow efficiency. Dodoxdv Txspfx Abzswa Currently located in a printshop in Germany, the unit is in excellent working condition and remains a reliable choice for industrial printing companies seeking to improve productivity and ergonomics in material handling. Format: 520 x 740 mm Equipment: Tub dimensions inside 525 x 840 mm max. opening 1255 mm min. opening 470 mm Pallet weight max. 500 kg Max. sheet size 52 x 74 cm

Year of construction: 2025, condition: new, Horizontal cement silos with a capacity of 45 m³ represent a practical, flexible, and cost-effective solution for the storage and precise dosing of cement and other powdered materials. Thanks to their compact modular design, no foundations, additional construction work, or complex installation procedures are required. This makes the silos ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited space or frequent equipment relocation. The structure is manufactured from high-quality steel with durable surface protection, ensuring a long service life and reliable operation even in demanding working conditions. Each silo is standardly equipped with: - integrated aeration system, Dedpfxszcwqqo Abzowa - dust filter, - safety valve, - material level sensors, - screw conveyor for continuous and reliable material discharge. The silos can also be equipped with an electronic system for connection to existing mobile and stationary concrete batching and mixing plants, enabling easy integration into existing production systems. The horizontal construction allows easy transportation and quick installation on site, while easily accessible components ensure simple and safe maintenance and cleaning. Available Versions HS 45 Standard – The Standard version is designed for reliable storage and continuous material dosing, ensuring simple operation and cost-efficient performance. Features: - Time-controlled material dosing - Easy integration with existing equipment - Ideal solution for standard production processes - Lower investment and maintenance costs HS 45 W-Series – The W-Series version is equipped with load cells for direct and precise material dosing. Features: - Real-time electronic weight measurement - Precise and automatic cement dosing - Enhanced control of mix structure and production process - Ideal for automated and professional concrete batching and mixing plants Available dosing capacity versions: - 15 m³/h - 25 m³/h - 40 m³/h

Year of construction: 2025, condition: new, Horizontal cement silos with a capacity of 35 m³ represent a practical, flexible, and cost-effective solution for the storage and precise dosing of cement and other powdered materials. Thanks to their compact modular design, no foundations, additional construction work, or complex installation procedures are required. This makes the silos ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited space or frequent equipment relocation. The structure is manufactured from high-quality steel with durable surface protection, ensuring a long-term use and reliable operation even in demanding working conditions. Each silo is standardly equipped with: - integrated aeration system, - dust filter, - safety valve, - material level sensors, - screw conveyor for continuous and reliable material discharge. The silos can also be equipped with an electronic system for connection to existing mobile and stationary concrete batching and mixing plants, enabling easy integration into existing production systems. The horizontal construction allows easy transportation and quick installation on site, while easily accessible components ensure simple and safe maintenance and cleaning. Available Versions HS 35 Standard – The Standard version is designed for reliable storage and continuous material dosing, ensuring simple operation and cost-efficient performance. Features: - Time-controlled material dosing - Easy integration with existing equipment - Ideal solution for standard production processes - Lower investment and maintenance costs Djdpfezcwp Hox Abzswa HS 35 W-Series – The W-Series version is equipped with load cells for direct and precise material dosing. Features: - Real-time electronic weight measurement - Precise and automatic cement dosing - Enhanced control of mix structure and production process - Ideal for automated and professional concrete batching and mixing plants Available dosing capacity versions: - 15 m³/h - 25 m³/h - 40 m³/h

Year of construction: 2025, condition: new, Horizontal cement silos with a capacity of 25 m³ represent a practical, flexible, and cost-effective solution for the storage and precise dosing of cement and other powdered materials. Dodpfszcwnisx Abzewa Thanks to their compact modular design, no foundations, additional construction work, or complex installation procedures are required. This makes the silos ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited space or frequent equipment relocation. The structure is manufactured from high-quality steel with durable surface protection, ensuring a long-term use and reliable operation even in demanding working conditions. Each silo is standardly equipped with: - integrated aeration system, - dust filter, - safety valve, - material level sensors, - screw conveyor for continuous and reliable material discharge. The silos can also be equipped with an electronic system for connection to existing mobile and stationary concrete batching and mixing plants, enabling easy integration into existing production systems. The horizontal construction allows easy transportation and quick installation on site, while easily accessible components ensure simple and safe maintenance and cleaning. Available Versions HS 25 Standard – The Standard version is designed for reliable storage and continuous material dosing, ensuring simple operation and cost-efficient performance. Features: - Time-controlled material dosing - Easy integration with existing equipment - Ideal solution for standard production processes - Lower investment and maintenance costs HS 25 W-Series – The W-Series version is equipped with load cells for direct and precise material dosing. Features: - Real-time electronic weight measurement - Precise and automatic cement dosing - Enhanced control of mix structure and production process - Ideal for automated and professional concrete batching and mixing plants Available dosing capacity versions: - 15 m³/h - 25 m³/h - 40 m³/h

Year of construction: 2025, condition: new, Horizontal cement silos with a capacity of 15 m³ represent a practical, flexible, and cost-effective solution for the storage and controlled dosing of cement and other powdered materials. Thanks to their compact and modular design, there is no need for construction work, foundations, or complex installation procedures. This makes them ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited working space or frequent equipment relocation. The silos are manufactured from high-quality steel and protected with durable surface coatings, ensuring a long service life and reliable operation even in demanding working conditions. Each unit is equipped with: - integrated aeration system - dust filter - safety valve - material level sensors - screw conveyor for continuous and reliable material discharge. The silos can also be equipped with an electronic system that enables easy integration with existing mobile and stationary concrete batching and mixing plants. The horizontal design allows easy transportation and fast installation on site, while maintenance and cleaning are simple and safe thanks to easily accessible key components. Available versions: HS 15 Standard – The Standard version is designed for reliable storage and continuous material dosing, offering simple operation and cost-efficient performance. Features: - Time-controlled material dosing - Easy integration with existing equipment - Ideal solution for standard production processes - Lower investment and maintenance costs HS 15 W-Series – The W-Series version is equipped with load cells for direct and highly accurate material dosing. Features: - Real-time electronic weight measurement - Precise and automatic cement dosing - Improved control of mix structure and production process - Ideal for automated and professional concrete batching and mixing plants Dosing capacity available in the following versions: - 15 m³/h - 25 m³/h - 40 m³/h Dsdozcwmropfx Abzjwa

Condition: like new (used), These machines are used in the food industry to process fruit and vegetables, separating the pulp from skins, seeds, and other waste. The machine is primarily used as a juice and purée extractor. It is also used to remove seeds and pulp from juice extracted by other machines. The extractor offers a high production capacity, which varies depending on the following factors: type of product (citrus fruits, pomegranates, tomatoes, etc.), condition of the product, and type of processing the product has already undergone. In general, the 'Finisher' extractor offers the following advantages: - Production of clearer juices (from mixtures of pulp, seeds, and skins) due to the lower solids content compared to crushing processes. - Prevention of aeration in the extracted juice. - Achieving the lowest possible moisture content in the waste. Dodpfjyz Ttmjx Abzswa WORKING MEASUREMENTS: Mesh length: 60.5 cm * Output may vary depending on the product.

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500mm. With its 4 shafts, the machine offers an enormous throughput! Mixing in lime or binding agents to dry the soil, blending with compost, sand, or other soils, etc., while simultaneously breaking up soil clumps. Aerating, shredding, tearing apart, and turning over biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle construction materials such as pumice, bricks, and Poroton blocks, while at the same time separating out fragments (mm); larger, harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Dwodpfx Aoyf Arlobzja Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.124

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.124, cutting width 1200 mm, this machine achieves an enormous throughput with its 4 shafts! Equipped with BS252 mixing shafts, armored in wear zones – produces a granulation of 0-35/40 mm, ideal for mixing and shredding while aerating the material, suitable for compost and liquid soil. High throughput even with wet soil. Fitted with an excavator adapter CW30/40. Price without adapter. Dsdpfx Abjyf Aqzszewa For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 – 77 m³/h Drain line required: 1 Series: TSP.124.105

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Dsdeyf Atpopfx Abzjwa Drain line required: 2 Series: TSC.134.015

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers an enormous throughput with its 4 shafts! Ideal for mixing and shredding, it aerates material, suitable for compost and liquid soil. High throughput even with wet soil. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 – 95 m³/hr Leakage oil connection required: 1 Series: TSP.154.131 Dwsdpfxjyf Au Te Abzoa

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Dwsdpfsyf Avdjx Abzsa Series: TSP.154.132

Year of construction: 2026, condition: like new (used), Disintegration, crushing, and mixing with grain size of 0-60/80 mm. For soil conditioning and mixing in lime, mixed binders, sand, compost, or other soils. Crushing and disintegration of soil clods, separation of stones, branches, roots, etc., with particle size 0-60/80 mm. Aerating, crushing, shredding, and turning of biomass, organic waste, and compost. For applying lime, we also offer a binder dosing unit in the program, available with a weighing system. The separator comes from a short-term rental and shows minimal signs of use. Dwsdpfxjyf Aute Abzea Fitted with a Likufix SW48 adapter – can also be modified to suit your requirements. Price without adapter. Suitable for excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain line connection required: 1 Series: TSC.154.342