Used Mfc Sensortechnik Gmbh T1000 (10Kn) for sale (69,131)

Condition: new, Year of construction: 2026, Blasting trolley 5t battery-powered for blasting system - Load capacity: 5t - For rail installation - Battery drive - Remote control - Size: Length = 3000 mm, Width = 1000 mm - Surfaces for workpiece fixture mounts Nedpeyyxidefx Aaajcr

Condition: new, Year of construction: 2026, Blast carriage 10t for blasting system with pneumatic drive. - Pneumatic drive for 10t load capacity - Load capacity: 10 t - Dimensions: L=2000mm W=2000mm H=500mm - For rail system - With mounting surfaces for workpiece holders Ncsdsyyxfrspfx Aaasr - Rotary table as an option

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity - L = 3000mm W = 1500mm H = 500mm Nodpfxoyyxa Ne Aaaecr - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift - Rotary table available as an option

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured Nodpfx Aaji E Hp Toaocr width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off Ncjdjff Huwspfx Aaasr • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), functionality: fully functional, Slow-speed shredder Nodpfx Ajyf I N Aoaascr Cutting width – 150 mm Motor power – 2.2 kW Rotor speed 200 rpm Number of rotor knives – 9 pcs Number of stator knives – 2 pcs 6 units available, in perfect condition Throughput up to 25 kg/h Price 1,000 EUR per unit

Condition: excellent (used), Used stainless steel tank Article number: 10896 Previous application: CIP (Cleaning-In-Place) Volume: 3300 L Type: Vertical, standing on 3 legs Material (in contact with product): Stainless steel V2A / AISI 304 Bottom: Klöpper head Max. operating pressure: Atmospheric Tank dimensions: Internal diameter: 1190 mm External diameter: 1200 mm Overall height: 3450 mm Cylindrical height: 3000 mm Overall width: 1250 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304 Ncedpfeyw Rn Hjx Aaasr Features: Nameplate: no Leg height: 420 mm Outlet diameter: 37 mm / 37 mm Clearance outlet to floor: 160 mm / 500 mm

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Ncodpfx Aaswrn Iyoajr Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2026, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). Ncsdpfxsugt Dxj Aaajr A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Motor power 4kW / 380 V Cutting speed 44m / min Working range 1.5 mm2 - Ø 90 mm weight approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Nodsyrqnzjpfx Aaaecr Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Year of construction: 2021, condition: used, Refrigeration Dryer – ALUP ADD 36 Manufacturer: ALUP Kompressoren GmbH Model: ADD 36 (1) Year of manufacture: 2021 Machine type: Refrigerated compressed air dryer Description Ncsdpjyt H Dujfx Aaajr The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems. This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines. Technical Specifications - Manufacturer: ALUP Kompressoren GmbH - Model: ADD 36 (1) - Year: 2021 - Product number: 4102005889 - Serial number: ITJ560627 - Power supply: 230 V - Frequency: 50 Hz - Power consumption: 0.236 kW - Phase: 1 Ph Operating Specifications - Working pressure: 15 bar - Maximum pressure: 15 bar - Maximum inlet temperature: 55 °C - Maximum ambient temperature: 43 °C - Refrigerant type: R513A Key Features - Reliable moisture removal from compressed air systems - Compact and energy-efficient design - Protects pneumatic tools and machinery - Suitable for continuous industrial operation - Easy integration into existing compressor installations Applications - Industrial compressed air systems - Food and packaging production lines - Manufacturing facilities - Pneumatic equipment protection Condition Used.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Nedoyl T U Dopfx Aaaocr Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine can be inspected on site – please arrange an appointment in advance. Ncodpfxjy Atqns Aaajr

Year of construction: 2026, condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. Ncjdpfx Aaeh T A Tnjasr The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS Nodpfx Aaeyzz Irjaocr • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Ncjdoya H Uyepfx Aaaor

Condition: good (used), functionality: fully functional, maximum load weight: 2,700 kg, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, trailer brake: trailer braked, Dimensions: approx. 420 x 180 x 220 cm Overall length: 570 cm The trailer is immediately ready for use and runs smoothly and reliably. Technical specifications: • Manufacturer: Böckmann Fahrzeugwerke GmbH • Model: CHF 613/20 • Gross weight: 2,700 kg • Axles: 2 × 1,350 kg (tandem axle) • Braking system: overrun brake (Knott KFZ 27) • Plug: 13-pin • Jockey wheel: present, fully functional Features & Highlights: • Sturdy tarpaulin body – weatherproof, good condition Ncodpfx Aaeyvy Aqsaor • Extremely robust Böckmann heavy-duty construction • Tandem axle = smooth and safe ride • Numerous lashing points • Ready for immediate use Condition: The trailer is used but technically reliable. Tarpaulin is clean and tight, electrics fully functional, chassis solid. Normal signs of use on metal parts (see photos).

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Nedpfx Aajyxc Twsajcr

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Infeed opening: 1500 x 750 mm / 1500 x 600 mm Ncsdouqyr Eepfx Aaajr Many wear parts replaced with new, main motor with new bearings. Undercarriage, hydraulic unit, Including control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine designation: Bandsaw Manufacturer: MEBA Model: 407A-OV Year of manufacture: 2005 Condition: very good (used) Functionality: fully functional Technical details Power: 5.5 kW (7.48 HP) Input voltage: 230 V Maximum cutting width: 407 mm Overall height: 2,000 mm Overall length: 1,400 mm Overall width: 2,500 mm Unladen weight: 3,500 kg Cutting range for round steel at 90°: 407 mm Cutting speed: 300 mm/min Saw band length: 5,120 mm Saw blade length: 5,120 mm Description MEBA 407A-OV CNC Horizontal Bandsaw Material feed conveyors Year of manufacture: 2005 Siemens control system Chip conveyor 5.5 kW 3.5 t L 1.4 x W 2.5 x H 2 m Saw band length: 5,120 mm Cutting speed: 15 - 150 m/min Clamping height: 10 - 407 mm Clamping width: 10 - 407 mm Cutting area: 407 x 407 mm Cutting range (round): 407 mm Infinitely adjustable lowering speed: 0 - 300 mm/min MEBA Maschinenbau GmbH Standard commission System designation: ECO 407A-OV Year of manufacture: 12/2005 Type: ECO 407A-OV MEBA Operating instructions MEBAMAT 407 A-OV Chapter 1 - Technical Data Machine type: MEBAMAT 407 AOV Machine number: 7099 Cutting range: 90° Round: 407 mm Flat: 407 x 407 mm Bundle clamping range: 10 - 407 mm Width: 10 - 407 mm Height: 0 - 600 mm Material feed: 0 - 9999 mm Single: Multiple: Remnant length: Manual: approx. 25 mm Automatic: approx. 70 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: stepless hydraulic Lowering speed: 0 to 300 mm/min - stepless Saw band dimensions: 5120 x 41 x 1.3 mm Operating instructions MEBAMAT 407 A-OV Saw band tension: hydraulic Approx. 3050 kg (net) Njdpsyxyv Asfx Aaaecr Machine dimensions (L x W x H): Approx. 1500 x 2600 x 2100 mm Max. support weight: Material weight max. 600 kg/m Working height: 750 mm With installation elements approx. 800 mm (option)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained cooling system from IKS Industrielle Kühlsysteme GmbH, year of manufacture 2016. Nedpfx Ajyx Hb Ejaascr The system operated without any issues until it was decommissioned in 05_2025 and received regular maintenance. If you have any questions or require further information, please send us a message or give us a call. Due to the size and complexity of the system, it is only offered for sale after a prior inspection.

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Nodpfxeyuvq Ts Aaascr Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, scan area length: 150 mm, scan area width: 150 mm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support Ncsdpswkpx Rsfx Aaaer - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Ncodpfx Aouy H Nqoaasr The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. Ncedpfx Aasxmfdxeaer • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation • Optimal price-performance ratio Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Axis speed 160mm/s Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm