Used Lukas Spreader, Lukas Double-Acting Column Actuator for sale (20,104)

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach Isdpfx Aksvwglvjpotn weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Itedpfx Asfxyh Rekpon Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: Ijdpfx Akeu Nfmmjpjtn - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition. Iodpfx Ajxcivdokpetn

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm Itjdpfx Aksfn Apzepon no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Itodpsuqdi Uofx Akpjn Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Iodpjzrptnefx Akpetn Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Itsdpfxjt Hwz Ne Akpen Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 2018, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min Iedpfx Akehx R Dvopjtn spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel Iodpfx Akoygtnaopotn • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY Itjdofv Awhjpfx Akpsn - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW Itodpfx Asfxyh Aekpon weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Itjdpfxeu Saaas Akpen Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set Ijdpfxsxp H Evj Akpstn

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Itedpfx Akew A Amropen Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered to a customer. We can manufacture this machine for you again on very short notice—customized to your individual requirements if desired. This is a hydraulic heated press with electrically heated plates and a manual sliding table for pressing, laminating, and forming processes involving heat. Base price: €42,000 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine to the specific application. The base machine provides a functional standard configuration—in practice, it is often supplemented with additional features and configured according to project requirements. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area Itsdpfx Akjy H Dtzspen * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table stroke: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer paint finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming press applications Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian National Safety Directive NR 12, which is based on and extends these standards. Our key strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm Itsdpolp U Euefx Akpjn column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm Itedpezrpt Isfx Akpjn pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, die cushion stroke: 200 mm, The machine still needs to be built. Requirements can be considered where possible. Ejector in ram – approx. 10 t. Table draw cushion approx. 800 x 850 mm. Weight approx. 18 t. Stroke approx. 600 mm. Ijdsvga H Espfx Akpotn

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons Itsdpfx Akedzqptepjn The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Itodeuqdqlspfx Akpon Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm Isdpfevb Hlwox Akpotn main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm Itedpfx Aksu Nfhdepjn dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Itodpfxou Icxqs Akpon Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Itodpfx Aksyl S Ngspsn Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm