Used Lincoln Central Lubrication for sale (11,395)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats Gsdpfxow Emh Se Aivskc * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 44,110 km, power: 302 kW (410.61 HP), first registration: 04/2021, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 6,100 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,450 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Power take-off (PTO) - Radio - Rear-view camera - Disc brakes - Sun visor - Tool box - Central lubrication system = Notes = Superstructure: Faun VarioPress V19b 516 / 16 m3. Container washing system for underground containers from 0.8 m3 to 5 m3. Fresh water tank: 300 liters with heating unit. Waste water tank: 1500 liters. 2 high-pressure hose reels with 15 m hose. HMF 2310 4 x hydraulically sliding platform. Scanreco remote control. = Further Information = Technical Information Gsdpfx Aow Hcayoivskc Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steered; Tire tread left: 80%; Tire tread right: 80%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Suspension: Air suspension Rear axle 3: Tire size: 385/55R22.5; Steered; Tire tread left: 75%; Tire tread right: 75%; Suspension: Air suspension Weights Unladen weight: 23,796 kg Payload: 12,204 kg GVW: 36,000 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: CF 410 8X2/6 FAUN / BEKKER LAGRA = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: excellent (used), mileage: 628,061 km, power: 300 kW (407.89 HP), first registration: 08/2012, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x2, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, power mirror, soot filter, = Additional Options and Accessories = - Speed limiter - Air suspension Godpev Sb Nljfx Aivokc - Particulate filter - Reversing camera - Sun visor - PTO (Power Take-Off) - Central lubrication system = Additional Information = Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Suspension: leaf suspension Rear axle 1: Tire size: 295/80/22.5; Dual tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 7,500 kg; Suspension: air suspension Weights Unladen weight: 16,615 kg Payload: 11,385 kg Gross Vehicle Weight (GVW): 28,000 kg Functional Mast: Telescopic (5 sections) Lifting capacity: 12,000 kg Lifting height: 1,800 cm Crane: HIAB 422EP-5 HIPRO, year of manufacture 2012, mounted behind the cab Body make: HIAB 422EP-5 HIPRO CE marking: Yes Condition Technical condition: very good Visual condition: very good Identification Registration number: 88-BBB-9 DAF 85.410 6X2 + CRANE HIAB 422EP-5 HIPRO TRACTOR UNIT EURO 5, 410 HP DRIVE: 6x2 DIFFERENTIAL LOCK 9 TONNES PER AXLE WHEELBASE: 340 cm AIRPLANE DAY CAB, AIR CONDITIONING NAVIGATION AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TRACTOR VERSION HIAB 422EP-5 HIPRO 8 x HYDRAULIC EXTENSIONS 4 x SUPPORT LEGS TOTAL WORKING HEIGHT: 18 METERS MAXIMUM LIFTING CAPACITY: 12,000 KG MAX. LIFT. CAPACITY AT 15.5 M: 2,520 KG RADIO REMOTE CONTROL FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: used, mileage: 364,902 km, power: 265 kW (360.30 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 17,740 kg, maximum load weight: 8,260 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,100 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space volume: 31 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, traction control, * German vehicle * 1st owner * Condition, see photos * Heil Farid EHP21313 body, load volume 31 m3 * Can handle containers up to 3,630 kg. * Schmidt front loader * CWOP C100 with scale and receipt printer * Hydraulically adjustable forks * 250 bar working pressure * Air conditioning * Liftable trailing steering axle * Leaf/air suspension + raise/lower * Automatic transmission * Hill start assist * Parking aid camera * Blind spot assistant * ABS/ASR/ESP * Electric windows * Differential lock * 2 air-suspended comfort seats Gksdpswrraaefx Aivsc * Sunroof * Toolbox * Work lights * Electrically heated mirrors * Beacon lights * Sun visor * Central lubrication system * Electric engine brake * Wheelbase 4.10 m + 1.40 m * Gross weight 26,000 kg * Empty weight 17,740 kg * Payload 8,260 kg If a new TÜV approval is desired, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Notice: We strongly offer and recommend an inspection and examination of the goods, so that the buyer does not develop any false expectations regarding condition and suitability. Inspection and examinations are possible and expressly desired at any time by appointment. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is responsible for personally verifying the condition and equipment of the goods/vehicles. Changes, intermediate sale and errors reserved.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Gedpfx Asxz Hh Ueivjkc Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance Godpfoxabvksx Aivekc - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Accessories = - Central lubrication system = Further Information = Model year: 2019 Intended application: Construction Drive: Wheeled Gedpfx Aoyhzpfeivskc Number of cylinders: 6 Unladen weight: 37,000 kg Body manufacturer: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model: 2019 CE certificate Engine: Deutz 6.1 L6 Tier 4 final EPA 160 kW Boom reach: 16 m, Boom 8.5 m, Stick 7.2 m Hose rupture protection on boom Cab: Hydraulic cab elevation Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs paint Central lubrication system Undercarriage: Mobile, 4 outriggers 8x new solid rubber tyres 12.00-20 Lighting: various lights on boom, grab and cab General Information Type: Bridge crane Model year: 2019 Color: Blue Technical Data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Technical data Make: Kaast Model: PS 45 Year: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Gkodpfxsy Alc Nj Aivjc Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 92,112 km, power: 235 kW (319.51 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, approx. 2200 operating hours, 06/23, right-hand drive, TollCollect system, water cooler and charge air cooler, ASR (anti-slip regulation), ESS (emergency stop signal), EDC (engine data control) motor regulation, BreakMatic, MAN TeleMatics 2 GPRS, driver's comfort seat with air suspension and lumbar support, MAN TeleMatics 2 GPRS radio, video function, central locking, decorative trim, entry lighting, electric door window lifts, Brake Assist 2, emergency braking signal (ESS), Visy side loader HS Speedline PPK 27m³, oscillating press 3.7m³, SPS (programmable logic controller) control, color camera system with 4 cameras + 1 monitor, standard telescopic boom with 1620 mm lift, Lifter HSS 420 double comb for 2 MGB 80-240 liter EN 840-1 or 1 MGB 1,100 liter EN 840, electric central lubrication system, MD4. Gedpfx Aijf Dg R Eevjkc

Condition: new, pressure 400 t chamfer lenght 4100 mm distance between columns 3550 mm column arm 510 mm ram stroke speed 110 mm/sec work speed 8.4 mm/sec return speed 130 mm/sec work stroke 375 mm dayligth 650 mm table height 1000 mm table width 240 mm back stop - adjustable max. 800 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 26409 kg range L-W-H 5450 x 2650 x 3470 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) Godpfxsxaadte Aivjkc - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table Gsdpfx Aexaam Ujivokc - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: new, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 22064 kg Dimensions (HxWxD) 5350 x 2450 x 3150 mm ----- HIGH-SPEED hydraulic press brake with Gksdpfexaba Nox Aivec increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 240 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 17082 kg Dimensions (HxWxD) 4550 x 2450 x 3200 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 Godpfx Aijxabdzovekc - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: excellent (used), mileage: 465,000 km, power: 488 kW (663.49 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, Year of construction: 2016, operating hours: 5,065 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional options and accessories = - Air suspension - Aluminium fuel tank - Central lubrication - Coupling - Heavy duty engine brake - Low-noise - PTO - Radio/CD player - Refrigerator - Reversing camera - Speed limiter - Toolbox - Vehicle heater - Visor - Xenon lighting = More information = Axle configuration Front axle 1: Steering Rear axle 1: Lift axle; Steering Weights Empty weight: 18.705 kg Carrying capacity: 17.295 kg GVW: 36.000 kg Functional Gsdpowdh Tgsfx Aivskc Crane: palfinger PK 42002-SH E + JIB PJ 080 C, year of manufacture 2015, behind the cab Make of bodywork: Palfinger PK 42002-SH E + JIB PJ 080 C CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device Gkodpfxoy Nd T Hj Aivsc - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, mileage: 214,379 km, power: 309 kW (420.12 HP), first registration: 03/2019, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 8x2, wheelbase: 6,050 mm, fuel: diesel, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 12,000 mm, total width: 2,550 mm, loading space length: 9,700 mm, loading space width: 2,530 mm, loading space height: 1,120 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Lift axle - Air suspension - Engine brake - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Lane keeping assist - Toolbox - Central lubrication system = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Gkodpfx Aioy Smvvsvec Brakes: Disc brakes Front axle: Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Middle axle 1: Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Middle axle 2: Double tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Suspension: Air suspension Rear axle: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Weights Unladen weight: 14,382 kg Payload: 17,618 kg GVW (Gross Vehicle Weight): 32,000 kg Financial Information Price: On request Identification Model number: AD320S42 8x2 / RETARDER / WINCH = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (We speak Russian). We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: Godpfx Aioy Sr Ikevokc depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: used, mileage: 571,153 km, power: 346 kW (470.43 HP), first registration: 04/2021, fuel type: diesel, tire size: 315/70/r22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: air conditioning, electric window regulation, fridge, spoiler, Transmission: 01802610, Automatic Tyre size: 315/70/r22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Gkedpfszabn Isx Aivjc Drive: Wheel Number of cylinders: 6 Engine capacity: 12.419 cc GVW: 18.000 kg Engine type: MAN D2676 LF79 = Additional options and accessories = - Central lubrication - PTO - Radio - Roof spoiler

Condition: good (used), mileage: 189,000 km, power: 294 kW (399.73 HP), first registration: 06/2020, fuel type: diesel, axle configuration: 6x2, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: Bluetooth, air conditioning, electric window regulation, = Additional options and accessories = - Cabin - Central lubrication - Low-noise Gkedpszb Ennsfx Aivsc - PTO = More information = Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 15.700 kg Carrying capacity: 12.300 kg GVW: 28.000 kg Technical condition: good Visual appearance: good

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min Gedpfozx Rlxox Aivekc - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES Gkodpfxszx Rqhe Aivjc – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 140mm - number of spindles 4 Godpfxjzx Sn Us Aivekc 1) horizontal lower 200mm, 5.5kW 2) vertical right 140mm, 4kW 3) vertical left 140mm, 4kW 4) horizontal upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm – top: - 6 infeed rollers, toothed, including 2 double rollers - outfeed roller, toothed, double, rubber – bottom: - side pressure roller - infeed roller, toothed, helical, in the lower table - side pressure roller - outfeed roller, smooth, metal - all rollers pneumatically pressed - length of the infeed table 1600mm - table adjustable up/down - central lubrication - electric setting of the planing thickness - lifting motor 1.1kW - stepless feed rate adjustment - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x140mm - dimensions L/W/H 3200x1700x1750mm - weight 3000kg ADVANTAGES – for 4 heads – ideal for both wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Gkjdpfx Aozxwz Tsivoc Free loading D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine number: 70 Travel distances: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm (horizontal) Z-axis: 990 mm (vertical) NC swivel head, continuously adjustable: +/- 105 degrees Tool magazine: 40 positions Tool holder: SK50 Motor spindle: 8,000 rpm / 68 kW Accessories: - Chip conveyor - Prepared for partition wall - Electronic handwheel - Internal coolant supply 20 bar (paper band filter 450 l) - Complete enclosure for the working area with roof - Flushing gun - Oil central lubrication system Gkedpfx Aiszxp A Nsvjc - Oil mist extraction system - 3D measuring probe with wireless transmission (Renishaw RMP60)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - track width 340mm - shaft width 340mm - disc bore diameter 80mm - discs mounted on the upper shaft 350mm - discs mounted on the lower shaft 300mm - max cutting height 200mm - min workpiece length 700mm – top - 2 rows of pressure rollers - smooth, sliding, pressure shaft - pressure rollers - 2 sliding, smooth, pressure shafts - shaft with saws - 3 smooth pressure rollers – bottom - track - shaft with saws - track - stepless feed speed adjustment - main motors 2 x approx. 55kW - feed motor 3kW - electric body lifting (up/down) - manual adjustment of saw shafts - central lubrication - dust extraction nozzle diameter 2 x 200mm - dimensions L/W/H 2700x1800x2150mm - weight approx. 5000kg ADVANTAGES - made in Germany - two-shaft - 2 x 55kW motor Gkedjzxqq Ijpfx Aivoc - multi-blade saw, used, very good condition Net price: 178900 PLN Net price: 41605 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to higher fluctuations)