Used Lincoln Central Lubrication for sale (11,329)

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Fodsxf Up Iopfx Aivjpn

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug Fpodpfszugn Ijx Aivon - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: excellent (used), Year of construction: 2018, Geibel & Hotz FS 640 SC Surface grinding machine Geibel & Hotz FS 640 SC with BR control, manufactured in 2018, in SUPER condition. CE compliant!! The machine comes from the testing department of an engineering company. Technical data: Year of manufacture: 2018 Brand: G+H SCHLEIFTECHNIK Model: Fedjz Rnh Topfx Aivopn FS 640 SD Clamping area: 600 x 400 x 375 mm Table load max.: 600 kg Distance table - spindle center min./max.: 140-525 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Length x Width x Height: 3000 x 2800 x 2500 mm Motor power: 3.7 kW Weight: 2300 kg About the machine: Offered is a surface grinding machine Geibel & Hotz FS 640 SC with BR control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for testing purposes. It features a very easy-to-use control system. A grinding travel of 600 mm in the longitudinal axis and a transverse travel of 400 mm make it suitable for toolmaking, jig and fixture construction, and small-series production. A comprehensive standard equipment and the easy operation of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Geibel & Hotz FS 640 SC with BR control has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Geibel & Hotz FS 640 SC on site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2006, Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader, Quinto software, version 4.3b, Software for cylindrical cutters, Software for conical cutters, Software for hemispherical conical cutters, Software for two-flute cutters, Software for three-flute cutters, Software for hob cutters, Software for up-and-down cutters, Software for wood drills, Software for tools with an axial angle, Software for taps, Software for step drills, Software for drills, types H and S, ISO axial software, ISO spiral software, Elbaron electrostatic mist extractor, Hydraulic workpiece clamping, Renishaw measuring probe, Automatic fire-extinguishing system, Automatic centralized lubrication system, Glass scales on the linear axes, 1 loading pallet, 16 grinding wheel flanges, 4 collets, 1 collet chuck, 1 automatic 5-jaw chuck, PMH. Fpedpfx Aisz Rpnhsvsn X-axis longitudinal movement: 380mm Y-axis transverse movement: 280 mm Z-axis vertical movement: 280 mm C-axis swivel range: 340° A-axis rotation range: 360 ° Center height: 210 mm Workpiece holder: ISO 50 Grinding wheel diameter: Max. 200 mm Drive power grinding lockers: 7,5 kW Grinding spindle speed: stepless 0 - 9000 rpm Connected load: 29 kW (400 V / 50 Hz) Dimensions W x D x H: 1590 x 1930 x 2550 mm mass: approx. 4800 kg colour: turquoise / grey

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Fodpfx Aisz Im Tnevjpn Table size: 1,250 × 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric Fsdpfx Aoy A Sgneivepn - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Fodpfsz Rl Hyex Aivopn Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Fjdpfxoz Nkuae Aivopn Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Fjdpfx Asz Rl Nzjivspn Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, This is a pizza conveyor oven manufactured by Lincoln, model Counter Top CT 2512 - continuous belt, year of manufacture 2022. The oven has been professionally overhauled in our in-house workshop and is fully functional. The list price is: €8,998 net / €10,707.62 gross Our price: €4,159.66 net / €4,950 gross You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 797 x 1269 x 457 mm Power connection: 400 V / kW: 6.1 / 50-60 Hz Exhaust air volume: 700 m³/h Temperature: adjustable up to 315°C Year of manufacture: 2022 Weight: 70 kg Belt dimensions: 410 x 1260 mm Fodszub Ezopfx Aivjpn Baking area: 410 x 520 mm Belt speed: 30 sec - 15 min Output: 30-40 pizzas (26 cm diameter)/hour Baking time per pizza: 4 minutes Condition: used, overhauled, fully functional Further details: High-performance conveyor oven for up to 40 pizzas per hour with a 4-minute baking time Smallest professional digital conveyor oven for space-saving and easy installation in front and back areas Ideal for heating, cooking, baking and preparing crispy products 4 programmable menu buttons Very high efficiency even at low temperatures thanks to impingement technology Temperature range from 32°C to 315°C freely adjustable Belt speed can be adjusted continuously (30 seconds to 15 minutes conveying time) Equipped with on/off switch and digital touch panel for temperature and belt speed control The conveyor oven replaces conventional kitchen equipment such as salamanders, griddle plates, fryers and ovens Perfect for front-of-house cooking areas due to stackability and mobile base (optional) The electric conveyor ovens are equipped with an innovative and easy-to-use digital control and digital display of temperature and time Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Fodsz Izduepfx Aivspn Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, mileage: 696,333 km, power: 287 kW (390.21 HP), first registration: 04/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2019, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Car kit - Combination lights - DAB radio - Roof spoiler - Remote central locking - High beam headlights - Windshield - Enclosed cabin - Speed limiter - Interior lights - Cabin - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - MX engine brake - Particulate filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Hose assemblies - Seat heating - Sun visor - Voice control - Stability control - Blind spot camera - Automatic heating system - Toolbox - Wind deflector - Central lubrication system = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 16S2500, manual transmission Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Fsdsz Rpdiepfx Aivspn Unladen weight: 8,629 kg Payload: 18,371 kg GVWR: 27,000 kg Interior Number of seats: 2 Maintenance APK (Technical Inspection): valid until 01.2027 Identification License plate: 98-BLV-4

Condition: excellent (used), power: 264 kW (358.94 HP), operation weight: 23,600 kg, tire size: 30/65R25, tire condition: 60 %, Year of construction: 2023, operating hours: 2,179 h, Equipment: air conditioning, VOLVO A30G Year: 2023 Operation hours: 2.179 hrs. ROPS Airco Back drive camera Radio Fpedpoz Rpq Nsfx Aivon Central lubrication body heating Tailgate Bridgestone tyres 30/65R25: front approx 60% good, rear approx. 50 % good VOLVO D11M Motor with 264kW CE Operation weight: 23,6 to. with new service

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Fodjzzz Naepfx Aivspn - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components Fodpfszzz N Hox Aivepn - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Fpedpfsz I S Uwex Aivon Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Fsdpfxez Nhzdj Aivepn Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: excellent (used), Year of construction: 2003, Degen FS 2550 Surface Grinding Machine Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. CE compliant!! The machine comes from the Richard-Hartmann School (vocational school) in Chemnitz. Technical data: Year of manufacture: 2003 Fpedpfx Aisz Rla Hsvjn Clamping area / table size: 500 x 250 mm Max. grinding area: 500 x 250 mm Max. travel (X / Z): 600 x 280 mm Max. distance between spindle nose and table: 490 – 500 mm Max. workpiece weight: 320 kg Dimensions of magnetic clamping plate: 500 x 250 x 80 mm Grinding spindle & feed Grinding wheel dimensions: 355 x 25 x 127 mm (standard) Spindle speed: 1,500 rpm (at 50 Hz) / 1,800 rpm Spindle motor: 2.2 kW (3 HP) Longitudinal feed (X-axis, hydraulic): continuously variable 1 – 25 m/min Transverse feed (Z-axis, automated): 0.1 – 10 mm/ About the machine: Offered is a Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. This universal surface grinding machine is in very good original condition. It comes from a vocational school where it was used only sparingly for training purposes. It has a very easy-to-use control system. A grinding travel of 500 mm in the longitudinal axis and a transverse travel of 250 mm make it suitable for toolmaking, fixture construction, and small-series production. Its extensive standard equipment and ease of operation are characteristic of this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Degen has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Degen on-site while it is powered up. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T Fpsdpfxsz Nx Hwe Aivjn

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Deckel FP4M universal milling machine in excellent technical and optical condition. Technical specifications: Fodjz Atxvjpfx Aivspn - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Automatic feed: X-Y-Z steplessly adjustable 6.3 / 630 mm/min - Rapid traverse X-Y-Z 1300 mm/min - Fixed angle table - Vertical quill, 90 mm travel - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head Includes cabinet with accessories.

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Fsdpfxoy D Nice Aivspn Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device 2x floating saws maximum saw blade distance 550 mm Fpodpfsqwgy Nex Aivon maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics strong solid body robust line not afraid of challenges

Condition: excellent (used), Year of construction: 1996, Maho MH 700 M Tool milling machine Deckel Maho MH 700 M with Heidenhain TNC 116 control, built in 1996, in SUPER condition. From the testing department of Castwerk Technologies. CE compliant!! Technical data: Year of construction: 1996 Universal table Speed: stepless up to 5000 RPM Feed rate: stepless in 3 axes from 0 to 3000 mm/min Travel ranges X/Y/Z: 700/450/450 mm Rapid traverse rates x/y/z: 5 / 5 / 4 m/min Table surface: 750 x 450 mm Table load: 450 kg Vertical quill stroke: 80 mm Vertical quill and horizontal quill - SK40 Hydraulic clamping system Weight approx. 3400 kg Space requirement approx.: 2.5 x 2 x 3 m Drive power: 12 KVA Accessories and equipment: Heidenhain TNC 116 control Hydraulic clamping, vertical and horizontal Fodpfx Asz Indneivopn Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Deckel Maho MH 700 M with a Heidenhain TNC 116 control. This universal milling machine is in very good original condition. It comes from a company where it was only used to a limited extent for training purposes. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel Maho has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Deckel Maho on site under power. You can find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 2013, operating hours: 9,710 h, One of the last models without a particulate filter: Liebherr L 542 Z 2plus1 Only used for light work on paved surfaces? No construction site! Original paint – very well-maintained machine. Chassis No. VATZ0435TZB032052 Year of manufacture: 2013 Operating hours: approx. 9710 (original) Machine delivered on January 15, 2013 Serviced regularly at Liebherr Last registered service at Liebherr on October 8, 2020, at 8678 hours Liebherr 4-cylinder in-line engine, water-cooled with turbocharger Emission stage III, 142 HP with 6.9-liter displacement (Liebherr engine type 934) Permissible total weight: approx. 17,000 kg, Tare weight: approx. 15,000 kg Hydrostatic drive with 3-speed transmission * Ride vibration damper * 3rd hydraulic control circuit * Driver's seat "Comfort" with pneumatic suspension (with seat heating) * Headrest for driver's seat * Radio with CD and USB connection * 4 work spotlights on the rear roof of the cab * 4 work spotlights on the front roof of the cab * 2 work spotlights on the sides * Automatic engine shutdown after 5 minutes of idling * Pre-filter for air intake - "TOP-AIR" * Automatic central lubrication system - factory-installed by Liebherr * Adjustable steering column * Preparation for rotating beacon * Rearview camera Fedpfx Ajz Rh Rhjivspn * Road approval * CB radio Tires: 20.5 x 25 L3, front: 2, 50% Michelin Tires: 20.5 x 25 L3, rear: 2, 40% Michelin Offer includes a fixed-mounted bucket with a capacity of 2.8 cubic meters - at a price of €43,900 net. Optional equipment available at an additional cost: * Hydraulic quick coupler: €3,550 incl. replacement of the fixed bucket with a quick-release bucket * High-dump bucket from 3.0 cbm to 5.5 cbm from €4,950 * Bucket with retaining clamp for SW, 3.0 cubic meters from €3,660 * Volume bucket 4 cubic meters €4,500 * 4-in-1 bucket 2 cubic meters upon request * Pallet fork, 5 or 8 tons from €1,990 If desired, also available with a used scale! Pfreundt WK 50 - €3,950 All prices are net for export/domestic sales plus 19% VAT. Sale only to commercial customers or for export. Sale in current condition as the machine stands. No warranty or guarantee. The indicated mileage/operating hours are read from the odometer/hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/guarantee. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Fedpeytb Uhsfx Aivspn Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos