Used Lcd Monitor for sale (5,510)

Condition: new, power: 427 kW (580.56 HP), overall weight: 33,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment list available upon request. * SZM Heavy-Duty Transport * 370 L fuel tank volume, right side 60L tank volume * AdBlue tank, left side * Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * High-performance engine brake MAN with full brake assist, stepless * Retarder Eco, speed-dependent * Stepless, energy-efficient * Disc brakes on front axle * Disc brakes on rear axle * Disc brakes on 2nd rear axle * Diesel engine MAN D3876, 427 kW (580 hp), 2,900 Nm torque, Euro 6e * MAN TipMatic, with Retarder 35 * Driving program MAN TipMatic Performance and Efficiency, up to 70,000 kg * Extension of driving program MAN TipMatic, Heavy-Duty Transport * Driving program MAN TipMatic Manoeuvre, shunting mode * Single-plate clutch, 430 mm, dry, reinforced (Longlife) * Front axle tires Goodyear 385/55R22.5 * Steering, close-fitting TL * Rear axle tires Goodyear 315/70R22.5 * Drive axle, close-fitting TL R * 2nd rear axle tires Goodyear 315/70R22.5 * GEN-3 drive axle, close-fitting TL, tire pressure monitoring system (TPM), with tire temperature display * Tire pressure display for trailer * 6x4 * Front axle, 9,200 kg, non-driven, stub axle, steered, non-liftable * Rear axle HYD-1390, 13,000 kg Lodpfx Abo Aa E Tqjyeru * HY axle with through drive, straight, non-steered, non-liftable * 2nd rear axle HY-1360, 13,000 kg, HY axle without through drive, straight, non-steered, non-liftable * Digital axle load display (ALM) for air-suspended axles * Digital axle load display (ALM) for trailer/semi-trailer * Leaf spring suspension on front axle, parabolic, 2-leaf, steel * Air suspension on rear axle * Air suspension on 2nd rear axle * Cab GX: the maximum (wide, long, extra-high) * Cab mounting, Comfort * LED package Plus, headlights, fog lights, cornering lights * Headlights, LED * Daytime running lights, LED * Fog lights, LED * Cornering lights, LED * Turn signals, side, LED * Mirror package, exterior mirrors, electrically adjustable, heated, front mirror * Curb mirror, both sides * Exterior mirrors, electrically adjustable with maneuvering aid, heated * Curb mirror, left, electrically adjustable, heated * Curb mirror, right, electrically adjustable, heated * Seat covers, textile, Comfort * Driver's seat package Premium, air-suspended, seat heating and seat ventilation * Multifunction steering wheel, leather * Height and inclination adjustable, electronically controlled steering system * MAN ComfortSteering * Instrument panel Professional 12.3 inches * Tachograph, digital, with remote communication (according to DSRC), CONTINENTAL * Electric auxiliary heater * Air conditioning, Climatronic * Water auxiliary heater, 4 kW * Electronic Stability Program (ESP) * Anti-slip regulation (ASR) * Adaptive Cruise Control (ACC) Stop and Go, distance-regulated * Speed limiter, adjustable * Limiter (engine control) * Emergency Brake Assist (EBA) * Not deactivatable, lane departure warning system (LDW), not deactivatable * Lane Change Assist (LCA) and turning assist * Driver Alert System MAN Driver Monitoring System * Traffic Sign Recognition * Reversing Motion System * Distance warning * MAN Media System Professional Navigation 12.3 inches * MAN Sound System Advanced with subwoofer * Navigation map Europe * Fifth wheel coupling JOST JSK 38 C 2 inch * Power Take-Off (PTO), transmission-dependent, type NH/4c,

Condition: used, power: 338 kW (459.55 HP), first registration: 03/2026, fuel type: diesel, empty load weight: 8,226 kg, maximum load weight: 11,274 kg, overall weight: 19,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2025, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, Color: White, unladen weight: 8,226 kg, total permissible weight: 19,500 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Leather seats, Air suspension, Retarder, Digital tachograph, Tractor coupling: JOST JSK37C-W 185, -710 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Stationary air conditioning, Adaptive Cruise Control (ACC), Auxiliary heater with automatic pre-selection, Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight height adjustment, Radio, Bluetooth audio streaming, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Alloy wheels, Electric window lifts 2x, Roof hatch, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric kerb mirror, Wide-angle mirror, Tire pressure monitoring, Immobilizer, Central locking with remote control, Windshield, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, Connector plug 1x15 pin, sailing function, Cornering light, Telematics system, Side skirts, Upper and lower bed, cab suspension, Alcoa, Smart tachograph 2, reinforced 10-ton front axle, New, 0 previous owners, Including factory warranty applicable upon purchase. Ledpfxoyw U H He Abyeru

Condition: used, mileage: 689,579 km, power: 100 kW (135.96 HP), first registration: 03/2014, fuel type: diesel, next inspection (TÜV): 10/2027, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 5,200 EUR * Volvo S80 D3 2.0 Diesel Kinetic Geartronic Automatic Navigation PDC Climate Control Leather Euro 6 * Seats: 5 (2+3) * Automatic transmission * Radio/CD * Lumbar support * Leather steering wheel * Navigation system * Touchscreen * Traction control * Automatically dimming interior mirror * Speed limiter * Front, side, and additional airbags * Cruise control * Ski bag * Distance warning * Seat heating * Automatic climate control * Hands-free system * Multifunction steering wheel * On-board computer * Bluetooth * Rain sensor * Tire pressure monitoring * USB * Emergency call system * Emergency brake assist * Electric windows * Electric mirrors * Central locking * Tire pressure monitoring * Traction control * Touchscreen * Isofix * ABS * ESP * Start/Stop automatic * Alloy wheels Lrode Adndtjpfx Abyju * Fog lights * Rear parking assist (PDC) * Full leather * Wheelbase: 284 cm * Unladen weight: 1531 kg * Payload: 669 kg * Weight: 00 kg * Passenger car registration * Vehicle No.: 42 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment only...) CONTACT DETAILS Telephone: WhatsApp: E-mail: Transit and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features should be checked separately. The condition as per the contract is only the one that is inspected on site and guaranteed in writing at the time of purchase. Please arrange an appointment...

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm Lodpfsz Ec Trsx Abyoru * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: excellent (used), mileage: 603,504 km, power: 471 kW (640.38 HP), first registration: 04/2019, fuel type: diesel, tire size: 385-65 R22,5, axle configuration: 6x2, wheelbase: 3,300 mm, fuel: diesel, fuel tank capacity: 460 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6c, suspension: air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, fog lights, fridge, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, traction control, - Alarm - Aluminum fuel tank - Heated mirrors - Brake booster - DAB radio - Roof spoiler - Differential lock - Low noise - Speed limiter - Isofix - Tilting hydraulics - Air conditioning - LED lighting - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Air horn - Metallic paint - Driver fatigue detection - Panoramic sunroof - Particle filter - Radio/MP3/CD system - Radio/CD player - Radio/cassette player - Rain sensor Lsdjz Avxfjpfx Abyjru - Spare tire - Rear view camera - Saddlebag - Sleeper cabin - Side door - Side skirts - Lane keeping assist - Stability control - Auxiliary heater - Blind spot monitoring - Immobilizer - Windshield - Power take-off (PTO) General information Year of construction: 2018 Technical information Number of cylinders: 6 Engine displacement: 15,256 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385-65 R22.5; Alloy rims; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315-80 R22.5; Dual tires; Alloy rims; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80% Rear axle 2: Tire size: 315-70 R22.5; Dual tires; Alloy rims; Lift axle; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Weights Unladen weight: 9,600 kg Payload: 16,400 kg GVWR: 26,000 kg Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Damage: none Further information Please contact Jeroen Kuipers or Job van Eldik for more information. Curious about what we can do for you? Contact our sales team today! Our team of experienced specialists is available to you every day to assist you in finding the right vehicle. Would you like to see for yourself? Simply arrange a test drive and experience the vehicle yourself. At KW-Automotive, you will find a large selection. We always have at least 50 high-quality light commercial vehicles and trucks in stock. This way you are guaranteed to find a vehicle that meets your requirements and your budget. Every year, we support hundreds of satisfied customers – both in the Netherlands and abroad. Why KW-Automotive? Personal service Reliable vehicles Attractive prices Fast delivery, so you can get started right away Fast communication by phone and WhatsApp Sales and delivery also abroad For many years we have been a reliable partner for our customers – and we are proud of that. Please note: All selling prices are plus preparation and delivery costs. Would you like to know more about a specific vehicle? Visit our website with detailed information, videos and technical details. Do you need a quick answer? Just write to us via WhatsApp! We will send you further information, photos or a...

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Lsdpfxsx D Ewme Abysru Machine still under power

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, wheelbase: 4,400 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, gearing type: mechanical, emission class: euro5, loading space volume: 8 m³, Equipment: ABS, AdBlue, air conditioning, electric window regulation, electronic stability program (ESP), power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD Lrodpoy Rt T Eefx Abysu - Power windows front - Reverse camera - Sun visor = Remarks = Engels Mercedes-Benz Accelo 815 4x2 Garbage Compactor | 150 HP | Euro 5 The Mercedes-Benz Accelo 815 4x2 Garbage Compactor is built for municipal and commercial waste collection. Its compact 4x2 chassis, 150 HP diesel engine and Damaeq Compact rear-loader body provide a solution for narrow streets and daily collection routes. Key Highlights - Mercedes-Benz Accelo 815 4x2 - 4.8-litre Euro 5 diesel engine - 150 HP (110 kW) / 580 Nm - Eaton FSO-4505-A manual transmission - Approx. 8,000 kg gross vehicle weight - Damaeq Compact rear-loader body - 8 yd³ / approx. 6.1 m³ capacity - 1.2 m³ rear loading hopper - Smartpack compression system - 100-litre hydraulic reservoir - 100-litre slurry / leachate tank - Heavy-duty ASTM A36 steel construction - Rear monitoring camera - Emergency stop system Built for Urban Waste Collection The Accelo 815 combines compact dimensions with a hydraulic refuse compactor. Its manoeuvrable 4x2 chassis supports operation in residential neighbourhoods, city centres, narrow streets and commercial areas where larger refuse trucks may be difficult to use. The Damaeq Compact body uses hydraulic compaction and Smartpack load compression to improve storage efficiency. The 1.2 m³ rear hopper supports collection cycles, while the slurry tank, rear camera and emergency-stop system support waste operations. Applications - Municipal waste collection - Residential refuse collection - Commercial waste collection - Urban sanitation services - City-centre collection routes Technical Specifications Vehicle: Mercedes-Benz Accelo 815 Body: Damaeq Compact garbage compactor Drive: 4x2 Engine: 4.8L Euro 5 diesel Power: 150 HP / 110 kW Torque: 580 Nm Transmission: Eaton FSO-4505-A manual GVW: Approx. 8,000 kg Body capacity: 8 yd³ / approx. 6.1 m³ Loading hopper: 1.2 m³ Hydraulic reservoir: 100 litres Slurry tank: 100 litres Cab: Day cab Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. = More information = Year of manufacture: 2024 Year of construction: 2024 Number of cylinders: 4 Engine capacity: 4.200 cc GVW: 8.000 kg Availability: in stock Body model: Compact 06

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Lrodszuyh Uopfx Abyju Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Lsdpspy Uzyofx Abyjru Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Lodpfxezdiuko Abysru Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Safety Workstation The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V, 9 A, 2010 W Condition: used / like new Lrodpozd Udpjfx Abyju (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 Lodper Ik Sqofx Abyjru • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Ljdozdtfljpfx Abyjru Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Lrsdszimgtopfx Abyou Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture) Lrjdozii Nqopfx Abyou   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Lrjdpfezizrkjx Abyou Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Lredpfx Abszra Rqeyou Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, spindle motor power: 15,000 W, number of axes: 2, Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details. • Spindle: ASA6 mount, 52 mm bar capacity • Chuck: 8" self-centering • Max turning diameter: 220 mm • Swing diameter: 450 mm • Max turning length: 500 mm • Tailstock: Automatic cycle with MT5 rotating center, 5 kN thrust • Software/features: Tool life management; automatic chuck open/close and tailstock advance/retraction during rotation; CNC cutting force monitoring (OSP P300LA-e TEX Kit for X/Z and spindle); IGF Advanced (L) with 3D real simulation; API Library 2 (ON STATUS) • Thermal deformation control: TAS-C (Thermo Active Stabilizer - Construction) • Usage/condition: Very little used (about 8 months of operation) Additional equipment • Chip conveyor: hinge type • High-pressure coolant pump: 0.8 kW, 5 bar, 20 l/min • Parts unloader: parts catcher arm and unloading (applicable with manual preset) • Bar feeder interface: prepared for bar feeder • Tool setter: manual presetting • Tool holder kit: 4 external, 1 front, 3 boring bar holders, 8 bushings, 3 plugs Ledpfo Adp U Hjx Abysru Technical Specification Counter Spindle Yes Driven Tools No

Condition: new, TRUMPF Lredsz I N Tkjpfx Abysu Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. Ljdozlp Ixjpfx Abyjru The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: used, KRÜSS Type: FP8400 Lsdpfx Absziap Isyoru Remarks: (Year of manufacture 2019) The device has never been put into operation, is in new condition, and is still in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analytical techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K), and lithium (Li), and alkaline earth metals such as calcium (Ca). The measurement is carried out simultaneously for these elements in a single step. Through consistent modernization of the flame photometers and a special focus on safety concepts, completely new application areas are opening up for many cost-sensitive customer groups – from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of the main strengths of AES; in addition, the technology of the FP8000 series scores points with its high determination accuracy. Measuring food samples Determining the quality of high-purity glasses and vials for pharmaceutical packaging Concrete classification, analysis of infusion solutions. Flame photometer, laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with corresponding quality of standards Precision:

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Lrsdpfx Aeztyabsbyou Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Lsdpfszhadcjx Abyoru Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t Ledpfx Aozl E Saobyeru dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: used, Year of construction: 2008, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - VAC-100a, 2x VAC-100m and VAC-100c Collating Towers - SA-40 Shingle Conveyor - ST-40 Stacker Ljdpfxs Adz N Ne Abyeru - ACF-30 Accumulator and Folder - SPF-30S Saddle Stitcher - HTS-30 Three-Knife Trimmer - TB-30 Transport Belt Key Features: - 40 stations - U-shaped layout: Efficient space utilization and easy monitoring - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,120 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.