Used Kotschenreuther Low Loader Semitrailer for sale (15,114)

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered Hnedpev Sw E Aefx Abkeu * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round Hnedpfezzhfuex Abksu * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height, loaded: 950 -> 1050 mm Rear overhang: 2,300 mm Extendable by: 3,400 mm Wheelbase: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading area: Extendable loading platform with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings, foldable outwards (LC 5,000 daN). 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t Load capacity (50t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). The trailing axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80 kg) Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color, in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories Yellow-red air couplings on the galvanized connection strip at the front. 2 chocks with holders. 2" King Pin A galvanized steel front panel approx. 2200 mm high. (± 105 kg) EN12642-XL Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) at the rear of the trailer. Loading area with approximately 38 mm thick hardwood floor. (± 320 kg) 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform. (± 30 kg) 1 spare wheel holder under the loading platform on the right side, in the direction of travel. Tires 435/50 R 19.5, at the manufacturer's choice. Hjdpfog Sk Tvsx Abkonu One mudflap at the rear of the trailer. Manual and description on a USB stick. One mounting for a rotating beacon at the rear of the trailer. On the swan neck and at the rear panel, left and right, one mounting each for warning signs including socket. One INOX tool box transversely under the loading platform (1000x400x2500) (± 135 kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90 kg) 4 pairs of WADER container locks. (± 60 kg) 10 pairs of galvanized plug-in rails approx. 100 x 50 mm, 1,000 mm high. (± 220 kg) 3 pairs of pocket rail strips, mounted transversely in the loading area, for plug-in rails 100 x 50 mm. (± 95 kg) S

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard Hnsdpfxjw Ii A Ao Abksu For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position Hjdew Nlzqepfx Abkjnu * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Hodpfxez Sybzj Abksnu

Condition: new, overall weight: 43,500 kg, axle configuration: > 3 axles, Year of construction: 2025, Equipment: ABS, GVN 4GVN O4 OVERWIDTH FLATBED KOC LIFT HYDRAULIC RAMP ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT SPECIFICATIONS AND BODY * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER NECK * STORAGE BOXES ON BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOAD AREA ON NECK * EXTENDABLE PANEL FOR OVERWIDTH LOADS * OVERWIDTH THRESHOLDS * WARNING SIGN FOR OVERWIDTH (4X) * TIE-DOWN POINTS * ADDITIONAL SUPPORTS * FIXED HYDRAULIC LOADING RAMPS * POWER CONNECTION FOR HYDRAULIC RAMPS * TRAILER LIGHT SYSTEMS * PRESSURE INDICATOR ----CHASSIS AND AXLES * OSMAN KOC AXLES, IDENTICAL TO BPW AXLES * 4 AXLES * LIFT AXLE (1ST AXLE) * LAST AXLE STEERABLE AND LOCKABLE * FULL AIR SUSPENSION * DRUM BRAKES * WABCO BRAKING SYSTEM ----TYRES * ALL TYRES * 235/75 R17.5 ----DIMENSIONS * LOAD SPACE DIMENSIONS * 9.55 M LENGTH x 2.55 M WIDTH (3 M WIDTH FOR OVERWIDTH LOADS) * LENGTH OF LOADING RAMP * 3.23 M LENGTH x 0.75 M WIDTH * LOAD SPACE DIMENSIONS OVER NECK * 1.8 M LENGTH x 2.4 M WIDTH * NECK HEIGHT FROM GROUND * 1.4 M HEIGHT * LOAD AREA HEIGHT FROM GROUND * 0.9 M HEIGHT * OVERALL LENGTH WITHOUT RAMPS * 13.6 M LENGTH ----READY FOR IMMEDIATE OPERATION Hnodpfxoxpzr Ds Abksu ----EXPORT SALES ONLY WITH DEPOSIT OF MIN. €500 - €2,000 ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER). 5-DAY, 30-DAY PLATES AND 17-21 DAY AUSTRIAN PLATES (EURO 1) VEHICLE RESERVATIONS EXCLUSIVELY VIA E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 is required. Modifications, errors and prior sale are subject to change! More vehicles available on our website: Sale is made exclusively under our General Terms and Conditions – see website. Important Note – Important Information: Despite careful inspection of all details in our offer, errors may occur. Some of these may be caused by transmission errors in the systems of different platform providers. Therefore, we point out that all details are without guarantee and no legal claim can be derived therefrom. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. All information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, empty load weight: 8,370 kg, maximum load weight: 34,630 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,020 mm, suspension: air, tire size: 445/45R19.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, raise and lower function, detachable loading ramps, rear support, landing legs, toolbox. Hodjyhrakopfx Abkjnu Body: Göbel low loader, 43,000 kg. Detachable ramps (reinforced version) available at an additional net cost of €1,800 Loading area: Gooseneck 4,500 mm, bed length 9,100 mm, 1st axle lift with starting assistance, 28 mm sealed hardwood floor, 25 pairs of flush-mounted heavy-duty lashing rings, each rated at 8,000 kg, side rail for lashing straps with claw hooks approx. every 500 mm, rated at 5,000 kg each, insert sleeves, 80 mm stake pockets, chassis hot-dip galvanized. For an additional charge, available with matching tractor unit 2648 LK (17697) and ballast platform (17699)! Approx. 54,160 km mileage! Loading height approx. 1,020 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Hodev D Abtopfx Abkonu

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10-ton axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading area length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable, 25,000 kg, pneumatic valve for adjusting the No. 4 wheel chocks, electric winch with remote control, 3x2 tie-down points in the platform outer frame (8 tons), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers for the loading platform, extendable bumper, ramp holder. Hnedpsih E Hyefx Abkju

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Hnsdpfx Abszqiiaeksu Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Hnjdpfez R Tf Esx Abkju

Condition: new, Year of construction: 2025, GVN Trailer 3 Axle Standart Lowbed      Please get contact with us for more informaiton;   Hjdpfxeqxa Szo Abksnu   

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Hodpsz R Tf Sofx Abksnu

Condition: used, empty load weight: 7,800 kg, maximum load weight: 21,200 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/1968, loading space length: 12,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, leaf spring suspension, extendable to 3m, hydraulic ramps, dual tires. Body: Hydraulic ramps. Length over axles approximately: 8200mm, length over kingpin: 3200mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hedpfxoi Rnwwe Abkjnu

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack Hedpoxarl Njfx Abksnu - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: used, empty load weight: 8,550 kg, maximum load weight: 27,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 3,055 mm, suspension: air, tire size: 245/70R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), hydraulic ramps, rear supports, outriggers. 9-ton axles, 13 tires, drum brakes, loading height approx. 880-950mm, can be widened to 3,050mm, length of the low-loader 8,800mm, length of the gooseneck 4,000mm, own hydraulic pump (independent of the towing vehicle), operation of the hydraulic ramps on the passenger side, total weight with a 3-axle tractor unit is 56,000kg, resulting in a payload of 36,290kg! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Hodpfxszq Hf Ej Abkonu

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Gooseneck: Hsdpsz Sh Htofx Abkjnu Gooseneck with angled front corners at approximately 45° and rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring approximately 30 mm thick Loading platform: Double-extendable design with rear slope of approximately 500 mm x 8°. 6 pairs of lashing rings that fold outwards (LC 5,000 daN) 4 pairs of lashing rings that fold outwards (LC 10,000 daN) 1 pair of lashing rings horizontally at the front of the loading platform (LC 10,000 daN) 1 intermediate table, approximately 250 mm Hardwood flooring approximately 48 mm thick, checkered steel plate over the axles Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: BPW axles and suspension; all axles hydro-mechanically steered. Technical axle load: 12,000 kg each Air suspension with lifting and lowering valve Axle tool Tires: Tires 245/70 R 17.5, load index (146/146 F) Brand of our choice Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and durable corrosion protection High-quality 2-component (2K) topcoat, single color in RAL 3002 carmine red Rear section metallic and painted in RAL 9010 (pure white) Steel structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connecting bar with 24N, 24S & 15-pole sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Including the following additional equipment: 2-inch kingpin Galvanized steel front wall, approximately 400 mm high Yellow-red air couplings on the galvanized front connecting bar A spare wheel holder in front of the front wall Electro-hydraulic unit Rear steering from front and rear, operable via cable remote control with pushbuttons, with single-axle steering control (without installation in the tractor unit) Mounting on the rear area of the gooseneck for aluminum ramp plates Mounting rail for aluminum ramp plates at the rear of the vehicle Galvanized folding supports under the slope of the loading platform Aluminum side walls and rear wall on the gooseneck, plug-in design, approximately 2,440 x 400 mm (L x H) The rear galvanized plug-in edges are removable (overall length approximately 2,560 mm) A galvanized toolbox, integrated into the angled gooseneck 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or a 45' container 8 pairs of pocket holders for plug-in edges approximately 100 x 50 mm in the outer frame of the loading platform Extensions galvanized, extendable by approximately 230 mm on each side Sliding mounting rails for aluminum ramp plates at the rear of the vehicle 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump 2 LED reversing lights mou

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Hnjdpfx Aboz Sh H Hokju Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Top coat with 2 layers of 2K topcoat, solid color in R

Condition: used, empty load weight: 5,580 kg, maximum load weight: 30,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/1988, loading space length: 12,700 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, total length: 12,800 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 9.5R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, pallet box, twin tires. Superstructure: Ideal showman trailer, Zorzi axles, loading area over axles 9000mm, loading area over kingpin 3700mm, 3x Zorzi axles. Approximately 3,000 EUR has recently been invested in brakes and axles! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hnedpfx Aoi Rnu Ujbksu

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm Hnedpfx Ajyrkpxjbkou * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 22,620 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 08/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, total length: 13,600 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 2-Axle Truck Transporter Semi-Trailer for the transport of 2 small construction machines (SZM) or one truck --New vehicle-- Permissible total weight: 32,500 kg Unladen weight: 9,880 kg External width: 2,545 mm Overall length: 13,600 mm Saddle height: 980 mm Hydraulic lift platform, completely enclosed Wheel recesses Hydraulic winch with 6,700 kg static pulling force, with radio remote control 24-volt electric hydraulic system ROR axles with drum brakes Tires: 8 x 205/65 R 17.5 Continental 2nd axle with trailing steering Hodpfozwa Tvjx Abkjnu KNORR trailer EBS Hydraulically adjustable and tiltable loading ramps at the rear Loading angle: 11° Mechanically extendable rear underrun protection Complete trailer hot-dip galvanized, side panels painted in RAL 9005 RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hjdpjz R Tc Defx Abkjnu

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Hnodpsizu Ntsfx Abkeu Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide Hnjdpozz Ei Refx Abkju * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin