Used Knuth Abs 380 L for sale (67,743)

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Hsdpfx Ahoi Rivwe Rjnn Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Year of construction: 2010, condition: excellent (used), Brand NN Hnedpjicz A Uofx Ah Rjn Year of manufacture: Used Dimensions LxWxH (mm) Outside 510 x 380 x 290 / inside 460 x 340 x 260 Weight (Kg) ca 2,82 each Number of pieces in stock 1056 Comments Used but in good condition

Condition: new, turning length 1000 mm turning diameter 380 mm turning dia. in gap 490 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm Hsdoxabv Rjpfx Ah Renn total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, functionality: fully functional, gearing type: other, color: orange, empty load weight: 2,000 kg, emission class: none, brakes: other, suspension: other, Year of construction: 2026, loading space length: 5,110 mm, loading space width: 2,106 mm, loading space height: 1,870 mm, driver cabin: other, Equipment: additional headlights, hydraulics, low noise, TICAB ABS-8000 Bitumen Emulsion Sprayer | 8000 L High-Capacity Asphalt Spraying Machine Perfect for asphalt paving, road construction, pothole repair, crack sealing, tack coat, primer application, and surface dressing across municipal roads, highways, parking areas, industrial sites, and airport runways. Take your road maintenance and paving operations to the next level with the TICAB ABS-8000. Built for demanding, large-scale jobs, this powerful sprayer delivers precise, uniform application of bitumen and asphalt emulsions for superior bonding and long-lasting results. Hnsdpfx Ahox Uxdws Ron Key Advantages 8000 L tank for extended, uninterrupted operation High-precision spray system for consistent, even coverage Compatible with bitumen emulsion, asphalt emulsion, tack coat, primers, and bonding layers Simple, operator-friendly controls for efficient workflow Robust, mobile design for real job-site conditions Engineered for contractors, road repair crews, and paving professionals Boost productivity, reduce material waste, and achieve professional-grade results on every project. 📩 Contact us today for pricing, delivery options, and full technical specifications. Ready for immediate deployment on your next job site.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: H = 380 mm W = 2500 mm D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Hsdjdnzg Nopfx Ah Ronn Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries

Condition: new, empty load weight: 940 kg, maximum load weight: 2,560 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,010 mm, loading space width: 1,960 mm, loading space height: 2,100 mm, loading space volume: 16.8 m³, color: white, construction height: 2,770 mm, working width: 2,040 mm, Equipment: ABS, ABS smooth outer walls, hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. ABS smooth outer walls - Type: New vehicle - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 940 kg - Payload: 2.560 kg - Interior dimensions: 401 x 196 x 210 cm (L x W x H) - Overall dimensions: 563 x 204 x 277 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Equipment: - ABS walls, extremely smooth coating for optimum advertising imprint - Wooden floor and side walls Finnish quality - Very sturdy welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - many stable cross beams therefore high point load - continuous longitudinal beams - frame due to its stable construction - 6 lashing brackets recessed inside in the side edge TÜV certified to 1000daN / kg - interior light - 2 flg. rear door lockable with VA espagnolette lock - 2 maneuvering handles at the front - automatic reverse drive - ALKO overrun device and parking brake - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - side flap, standard right, mounted at 210 cm high. - Side flap opens flush with the floor (without edge!) Optional accessories available: - Rear supports mounted, the pair - 100km/ approval with wheel shock absorbers - Lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hsdpfx Aou Skw Aoh Rjnn

Condition: good (used), mileage: 376,299 km, power: 279 kW (379.33 HP), first registration: 08/2005, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: ABS, differential lock, = Additional Options and Accessories = - Speed limiter - Power take-off (PTO) = Remarks = DAF CF 380 6x2 Roadcleaner Bekker Lagram High pressure pump Uraca P3-10 Centrifugal pump ZLKD 100/200 Good working condition Hedpfxswwtiaj Ah Renn = Further Information = Axle configuration Front axle: Steerable; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Rear axle 1: Steerable; Tire tread left: 40%; Tire tread right: 40%; Suspension: air suspension Rear axle 2: Twin tires; Differential lock; Tire tread inner left: 60%; Tire tread outer left: 60%; Tire tread inner right: 60%; Tire tread outer right: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 18,580 kg Payload: 7,420 kg Gross vehicle weight: 26,000 kg Condition Technical condition: good Visual condition: good Damages: none Further information For more information, please contact Gerrit Haverhoek or Piet Haverhoek.

Condition: good (used), machine/vehicle number: 0159, Year of construction: 2017, Cummins QSL9 380 from Uniktruck Hsdpfoyuhf Aox Ah Ronn

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 Hsdpfscmr D Hox Ah Ronn burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Hsdsyla I Repfx Ah Ronn Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: new, Transformer 220 V mono to 380 V tri Power converter: 10 kW New, never used Hnjdpjyk E Hvefx Ah Rsn Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Hsdpfx Ahjxy Ng Re Rjnn Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: used, machine/vehicle number: WFDFLT23861001990, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total length: 9,800 mm, total width: 2,550 mm, tire size: 265/70 r19,5, color: red, Further information Former exhibition vehicle from 2006 - was used internally and therefore shows signs of use! Side collision protection: Aluminum, from kingpin to start of side collision protection 2 600 mm Hsdsi Ri Hyjpfx Ah Rsnn Underride guard: Frame color and flush with end of chassis as far inwards as possible Wheel chocks: 2 pieces with bracket Bumpers: 2 steel bumpers Paint: Sandblasted substrate, 2-component acrylic paint Wheel rims: Factory silver Approval: with Dekra approval

Condition: used, mileage: 27,685 km, power: 102 kW (138.68 HP), first registration: 01/1993, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, total length: 6,300 mm, total width: 2,500 mm, total height: 3,000 mm, Equipment: ABS, Internal number Robust LF8/6 on MB 814 with the proven 6-cylinder 6l naturally aspirated diesel engine and 140 HP Hodpfx Aowqarueh Rsnn +++++ Differential lock on rear axle +++++ Built-in tank with a capacity of 610l, rear pump 8/8 Bodywork and cab are rust-free Ready to drive and operate +++ Errors, changes, and prior sale reserved

Condition: excellent (used), Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 61024546, clamping force: 800 kN, screw diameter: 40 mm, injection weight: 180 g, number of injections: 1, type of input current: three-phase, - MC6 control system Hnedpfsya Eguex Ah Ren - APC

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Hsdpfxoxtvb Ue Ah Rsnn Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: used, functionality: fully functional, This type of filling machine is designed for the dosing of sauces and other products in the food field, in particular liquid and pasty products that hold in solution pieces of particularly delicate solid products, e.g.: tomato sauce, Bolognese sauce, vegetable puree, béchamel jam, fruit purees, etc. MACHINE COMPOSED OF: - HIGHLIGHTER - ISHIDA MULTIHEAD WEIGHER - VSB/L-4 4 PISTON AUTOMATIC FILLING MACHINE - MONDINI COMPACT EVOLUZIONE E 380 THERMO SEALER AVAILABLE FOR DIFFERENT FORMATS: - Round: 99 mm diameter. Hnodpfx Ahswny Rxj Ron - Rectangular: 162 x 122 mm. - Rectangular: 255 x 150 mm.

Condition: used, power: 11 kW (14.96 HP), volume flow: 5,800 m³/h, Extraction system for grinding and deburring machines Hjdpfx Aszdzfyjh Ronn 11 kW 5800 m³/ h

Condition: good (used), Remark: The crash barriers may show scratches, slight dents dents or other damage. Included in delivery is: 01x crash barrier, used material color: yellow/black execution: full-walled Hnedsnwnmyjpfx Ah Ron total length: approx. 1.380 mm clear width: approx. 1.205 mm total depth: approx. 205 mm total height: approx. 350 mm material thickness: approx. 5,00 mm Number of drill holes: 04 pcs. Drill hole Ø: approx. 18 mm Weight | pc: approx. 33,820 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Hsdpfsd Ttzfjx Ah Rjnn Technical data of the shelf connector: Manufacturer: Jung Heinrich Type: Esmena for upright profile width: 76.2 mm Included in delivery: 01x shelf connector used material colour: green Shelf spacing: approx. 245 mm Profile: approx. 80 x 40 mm Weight/pc: approx. 0.98 kg/pc. 04x hexagon head screws, M8 x 20 04x hexagon nut, M8 04x washers, M8

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 400 mm. Technical data to the shelf connector:Manufacturer: Link 51Type: Boltless XLIncluded in delivery:01x shelf connector used(consisting of 2 profiles)Usable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 515 mmShelf spacing: approx. 400 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.321 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Hnjdpfx Asd Tyizsh Ren

Year of construction: 2020, condition: new, We offer here a new shelf connector of the manufacturer Nedcon NS for sale. Included in delivery are: 01x SET Spacer NR new Hnjdsf S Iq Topfx Ah Rsn length: 200 mm Material colour: sendzimir galvanized consisting of each: 01x spacer NR L=200, sendzimir galvanized 02x hexagon head screw 8.8 M10x25 galvanized 02x Toothed nut, hexagonal 8.8 M10 flange galvanised 04x hexagon head screw, M10 galvanized

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Hnjdpfji Euu Uox Ah Rsn Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: good (used), We offer you here a used shelf connector of the manufacturer Mecalux for sale. Hnedpfxed Ttzhs Ah Rjn Technical data of the shelf connector: Manufacturer: Mecalux Included in delivery: 01x shelf connector used material colour: sendzimir galvanized shelf distance: approx. 400 mm profile height: approx. 80 mm Weight/pc: approx. 0.704 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 300 mm. Technical data for shelf connector:Manufacturer: Link 51Type: Boltless XL Included in delivery:01x shelf connector used (consisting of 2 profiles)Suitable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 415 mmShelf spacing: approx. 300 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.092 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Hsded Tymdjpfx Ah Rsnn