Used Ked, Kurt Ehemann G 15 X 15 for sale (86,729)

Condition: used, maximum load weight: 1,037 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 05/2022, loading space length: 3,070 mm, loading space width: 1,830 mm, loading space height: 600 mm, total width: 1,900 mm, total height: 600 mm, A10 GW26G000366 Vehicle transport trailer by STEMA, model Carrier XL 15-30-18.1, Registration no.: L-AH 142, chassis no.: WSEHARF41NG000366, GVW: 1,500 kg, high-loader, with overrun brake, 100 km/h, 2 loading ramps behind the license plate, new tires Iisdjym Ifgepfx Amljf Errors and prior sale excepted.

Condition: used, The centrifuge comes with a Beckmann Coulter SX4750 Rotor! Speed: - 200–10,200 RPM (10-RPM increments) - Display in RPM or RCF Time: - Up to 99 h 59 min or continuous - Displays remaining or elapsed time Temperature: - Set range: −10 to +40 °C (1° increments) - Control accuracy: ±2 °C - Ambient range: 10–35 °C Humidity: - < 75% (non-condensing) Acceleration - 10 rates Deceleration - 11 rates Dimensions (W × D × H): Iedpfsyfnxdjx Amleif - 76.2 × 62.2 × 34.3 cm - 30.0 × 24.5 × 13.5 in. Weight: - 128 kg (283 lb) Ventilation Clearance: - 7.6 cm (3.0 in.) Finishes: - Coated control panel - Acrylic enamel housing Good working condition. Please check out our other listings as well.

Condition: new, mileage: 500 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New Vehicle 18 t. Truck MAN TGM 18.320 BL Meiller 3-way tipper with 8,560 kg payload and a new HMF 1320K5-RCS loader crane with hydraulic 5-stage extension up to 14.90 m, radio remote control, 2-way hydraulically extendable swing outriggers, rotator and grab system with 5 + 6 control circuits, EVS system, Meiller 3-way Trigenius tipper D212, 320 hp, automatic transmission, high-performance engine brake, EVBec, trailer coupling with air and hydraulic connections for tipping trailers, air conditioning, air suspension on rear axle, reversing camera, Driver Seat Package Plus, central locking and much more. Extended MAN manufacturer warranty until 05.11.2027 or up to 100,000 km ATS warranty until 05.11.2029 or up to 240,000 km Truck Specifications: Mileage: 1,259 KM CC short cab with rear window 3 seats Drive: 4 x 2 Unladen weight: 9,440 kg Payload: 8,560 kg Engine: Euro 6 E Wheelbase: 3,875 mm Meiller Trigenius D212, 4,200 x 2,450 mm, sideboards 600 mm high Front wall 800 mm high Tipper bed floor: 4 mm Load securing rings on floor and side wall 600 mm side and rear wall height Rear wall of tipper bed pendulum-mounted and foldable MAN PowerMatic 08.13 OD automatic transmission Operated via MAN TipMatic steering column lever Transmission function: MAN Idle Speed Driving Trailer coupling, Rockinger type 400 G 150 A with compressed air connections Towed load: 21,000 kg Permissible gross train weight: 36,000 kg Tipper hydraulics connections at rear for 3-way tipping trailers Front axle leaf sprung, rear axle air suspended Differential lock on rear axle Front axle: 7,500 kg; rear axle: 11,500 kg Stabilizer on front and rear axles Shock absorbers on front and rear axles HY axle ratio i=5.29 Full braking assistant Emergency brake assistant EBA Lane departure warning LDW Turn assist Attention warning MAN AttentionGuard Tire pressure monitoring system (TMP) Reversing Motion System (reversing camera) Traffic sign recognition Front detection EBS with ABS and ASR Disc brakes on front and rear axles ESP High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill-hold system Air conditioning Cruise control Sun visor Central locking 2 LED rotating beacons on cab roof 2 work lights behind cab roof Multifunction steering wheel Daytime running lights LED Electrically adjustable and heated exterior mirrors Electric windows Driver Seat Package Plus with air suspension, belt height adjustment and seat heating Comfort seat covers MAN Media System Advanced 7 inch MAN Sound System Smartphone integration New vehicle with day registration on 05.11.2025 Loader Crane Equipment New HMF 1320K5-RCS loader crane with hydraulic 5-stage extension Manufacturer warranty until 09/2027 HMF SC radio remote control with linear control levers Iedpfx Aox Iywfsmljif Rotator and grab system with 5 + 6 control circuits Lifting capacity at approx. 4.50 m / 2,470 kg // 6.30 m / 1,630 kg // 8.40 m / 1,140 kg // 10.60 m / 860 kg // 12.80 m / 680 kg // 14.90 m / 580 kg (manufacturer data) Hydraulic reach: 14.90 meters Crane extensions possible up to 17.30 meters 2-stage support with hydraulically extendable swing outriggers Autoswitch with automatic mode change between EVS/CYL operation Temperature monitoring LED spotlight on articulated arm with 3,040 lumen Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Errors and prior sale excepted. Internal Vehicle Number: 2576

Condition: new, mileage: 500 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New Vehicle 18 t. Truck MAN TGM 18.320 BL Meiller 3-way tipper with 8,560 kg payload and a new HMF 1320K5-RCS loader crane with hydraulic 5-stage extension up to 14.90 m, radio remote control, 2-way hydraulically extendable swing outriggers, rotator and grab system with 5 + 6 control circuits, EVS system, Meiller 3-way Trigenius tipper D212, 320 hp, automatic transmission, high-performance engine brake, EVBec, trailer coupling with air and hydraulic connections for tipping trailers, air conditioning, air suspension on rear axle, reversing camera, Driver Seat Package Plus, central locking and much more. Extended MAN manufacturer warranty until 05.11.2027 or up to 100,000 km ATS warranty until 05.11.2029 or up to 240,000 km Truck Specifications: Mileage: 1,259 KM CC short cab with rear window 3 seats Drive: 4 x 2 Unladen weight: 9,440 kg Payload: 8,560 kg Engine: Euro 6 E Wheelbase: 3,875 mm Meiller Trigenius D212, 4,200 x 2,450 mm, sideboards 600 mm high Front wall 800 mm high Tipper bed floor: 4 mm Load securing rings on floor and side wall 600 mm side and rear wall height Rear wall of tipper bed pendulum-mounted and foldable MAN PowerMatic 08.13 OD automatic transmission Operated via MAN TipMatic steering column lever Transmission function: MAN Idle Speed Driving Trailer coupling, Rockinger type 400 G 150 A with compressed air connections Iiedpfx Aex Iywxjmljf Towed load: 21,000 kg Permissible gross train weight: 36,000 kg Tipper hydraulics connections at rear for 3-way tipping trailers Front axle leaf sprung, rear axle air suspended Differential lock on rear axle Front axle: 7,500 kg; rear axle: 11,500 kg Stabilizer on front and rear axles Shock absorbers on front and rear axles HY axle ratio i=5.29 Full braking assistant Emergency brake assistant EBA Lane departure warning LDW Turn assist Attention warning MAN AttentionGuard Tire pressure monitoring system (TMP) Reversing Motion System (reversing camera) Traffic sign recognition Front detection EBS with ABS and ASR Disc brakes on front and rear axles ESP High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill-hold system Air conditioning Cruise control Sun visor Central locking 2 LED rotating beacons on cab roof 2 work lights behind cab roof Multifunction steering wheel Daytime running lights LED Electrically adjustable and heated exterior mirrors Electric windows Driver Seat Package Plus with air suspension, belt height adjustment and seat heating Comfort seat covers MAN Media System Advanced 7 inch MAN Sound System Smartphone integration New vehicle with day registration on 05.11.2025 Loader Crane Equipment New HMF 1320K5-RCS loader crane with hydraulic 5-stage extension Manufacturer warranty until 09/2027 HMF SC radio remote control with linear control levers Rotator and grab system with 5 + 6 control circuits Lifting capacity at approx. 4.50 m / 2,470 kg // 6.30 m / 1,630 kg // 8.40 m / 1,140 kg // 10.60 m / 860 kg // 12.80 m / 680 kg // 14.90 m / 580 kg (manufacturer data) Hydraulic reach: 14.90 meters Crane extensions possible up to 17.30 meters 2-stage support with hydraulically extendable swing outriggers Autoswitch with automatic mode change between EVS/CYL operation Temperature monitoring LED spotlight on articulated arm with 3,040 lumen Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Errors and prior sale excepted. Internal Vehicle Number: 2576

Condition: used, mileage: 1,259 km, power: 235 kW (319.51 HP), first registration: 11/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New Vehicle 18 t. Truck MAN TGM 18.320 BL Meiller 3-way tipper with 8,560 kg payload and a new HMF 1320K5-RCS loader crane with hydraulic 5-stage extension up to 14.90 m, radio remote control, 2-way hydraulically extendable swing outriggers, rotator and grab system with 5 + 6 control circuits, EVS system, Meiller 3-way Trigenius tipper D212, 320 hp, automatic transmission, high-performance engine brake, EVBec, trailer coupling with air and hydraulic connections for tipping trailers, air conditioning, air suspension on rear axle, reversing camera, Driver Seat Package Plus, central locking and much more. Extended MAN manufacturer warranty until 05.11.2027 or up to 100,000 km ATS warranty until 05.11.2029 or up to 240,000 km Truck Specifications: Mileage: 1,259 KM CC short cab with rear window 3 seats Drive: 4 x 2 Unladen weight: 9,440 kg Payload: 8,560 kg Engine: Euro 6 E Wheelbase: 3,875 mm Iiodpfsx Iywlox Amljf Meiller Trigenius D212, 4,200 x 2,450 mm, sideboards 600 mm high Front wall 800 mm high Tipper bed floor: 4 mm Load securing rings on floor and side wall 600 mm side and rear wall height Rear wall of tipper bed pendulum-mounted and foldable MAN PowerMatic 08.13 OD automatic transmission Operated via MAN TipMatic steering column lever Transmission function: MAN Idle Speed Driving Trailer coupling, Rockinger type 400 G 150 A with compressed air connections Towed load: 21,000 kg Permissible gross train weight: 36,000 kg Tipper hydraulics connections at rear for 3-way tipping trailers Front axle leaf sprung, rear axle air suspended Differential lock on rear axle Front axle: 7,500 kg; rear axle: 11,500 kg Stabilizer on front and rear axles Shock absorbers on front and rear axles HY axle ratio i=5.29 Full braking assistant Emergency brake assistant EBA Lane departure warning LDW Turn assist Attention warning MAN AttentionGuard Tire pressure monitoring system (TMP) Reversing Motion System (reversing camera) Traffic sign recognition Front detection EBS with ABS and ASR Disc brakes on front and rear axles ESP High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill-hold system Air conditioning Cruise control Sun visor Central locking 2 LED rotating beacons on cab roof 2 work lights behind cab roof Multifunction steering wheel Daytime running lights LED Electrically adjustable and heated exterior mirrors Electric windows Driver Seat Package Plus with air suspension, belt height adjustment and seat heating Comfort seat covers MAN Media System Advanced 7 inch MAN Sound System Smartphone integration New vehicle with day registration on 05.11.2025 Loader Crane Equipment New HMF 1320K5-RCS loader crane with hydraulic 5-stage extension Manufacturer warranty until 09/2027 HMF SC radio remote control with linear control levers Rotator and grab system with 5 + 6 control circuits Lifting capacity at approx. 4.50 m / 2,470 kg // 6.30 m / 1,630 kg // 8.40 m / 1,140 kg // 10.60 m / 860 kg // 12.80 m / 680 kg // 14.90 m / 580 kg (manufacturer data) Hydraulic reach: 14.90 meters Crane extensions possible up to 17.30 meters 2-stage support with hydraulically extendable swing outriggers Autoswitch with automatic mode change between EVS/CYL operation Temperature monitoring LED spotlight on articulated arm with 3,040 lumen Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Errors and prior sale excepted. Internal Vehicle Number: 2576

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: Iiodpfezkb Hdjx Amlof - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: new, Year of construction: 2026, machine/vehicle number: 20251217001, fuel type: diesel, motor manufacturer: Perkins 403D-15, General information Field of application: Construction Weights Empty weight: 746 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 211 x 85 x 125 cm CE mark: yes Other information Fuel consumption: 2.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A40 Iodpfx Amoyt Ap Hsljif Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 23GS101972, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Please contact Team DPX for more information Iisdporulz Esfx Amlsf = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Iiodpsi Riwujfx Amlef Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, mileage: 6,500 km, power: 390 kW (530.25 HP), first registration: 01/2018, fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, compressor, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Arocs 4153 truck, Berger / AWU 410, 8x8 Another virtually identical vehicle with a turbo retarder clutch is under construction. Estimated completion: around 10/2020. OMARS 120t superstructure with a 10-meter recovery arm / double extension at the rear. Original analog tachograph installed! 2x 20t rear winches. Wheelbase: 5750 mm. Fully equipped with radio communication for the entire superstructure / the superstructure will be additionally wrapped in yellow foil. Power generator: 220 / 380 volts. V4A stainless steel boxes with LED lighting / all parts are galvanized or made of V4A. Pneumatic LED light mast. The chassis has everything except leather seats / cab width: 2300 mm. Cab suspension: air / air-conditioned seats / navigation system with sound system / 2 beds / electric sunroof, and much more. Iedpfxjkktwre Amleif We have other vehicles under construction / Arocs 4153 8x8 with turbo retarder clutch /// Scania S / R 650 8x4 /// Volvo FH 16 8x4 750; for all vehicles, the equipment of the superstructure as well as the color can still be freely chosen /// the chassis all have absolute full equipment. Errors and omissions excepted / we only sell according to our general terms and conditions.

Year of construction: 2022, condition: used, sheet width 1550 mm plate thickness 3 mm Iodpfx Amofv H Dnoloif distance between columns 1600 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated double dust extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 115 kg Iedpfx Amoflt Aloleif The Scantool industrial belt sander models with double dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built according to the strictest environmental and safety regulations. The belt sanders are standardly equipped with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, Bernardo Goliath 500 x 1500 Production Lathe Technical Specifications Centre distance: 1500 mm Centre height: 250 mm Swing diameter over bed: 500 mm Swing diameter over gap*: 720 mm Swing diameter over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24 steps): 9 – 1600 rpm Longitudinal feed range (80 steps): 0.063 – 6.43 mm/rev Cross feed range (80 steps): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 3020 x 1240 x 1550 mm Weight approx.: 3285 kg * Removable gap bed section length: 200 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • One-piece cast machine bed ensures maximum rigidity and minimal vibration, providing the essential prerequisite for precise turning • Modern precision angular contact ball bearing spindle bearings • Central, user-friendly feed and thread control, with lead and feed shafts • Rapid traverse in longitudinal and cross directions as standard to reduce idle time • Large-dimension, hardened and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Adjustable tailstock for taper turning, handwheel with fine graduation (0.02 mm) • Electromechanical foot brake to minimise non-productive time • Excellent cutting performance, even during facing operations Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross Ijdpfx Aoxl D Akomloif • LED machine lamp • 3-axis digital readout ES-12V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 400 mm • Fixed steady rest – max. through diameter 200 mm • Follow rest – max. through diameter 110 mm • 1 live centre / 1 revolving centre • Motor with magnetic brake as per CE standards • Foot pedal with brake function as per CE • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Reducing sleeve • Chip guard (rear) • Operating tools

Condition: used, Overhead crane with hoist motor and control terminal. Width: 15.5 m Height: 4.5 m (max. structural height) Depth: 7 m Iiedpfey Hp T Tsx Amljf Condition: good, second-hand

Condition: used, Year of construction: 2024,

Year of construction: 1996, condition: used, material width 150 mm material thickness 2,5 mm feed length 485 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Iiodpjul D Slefx Amlef

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured Iisdpfxsg A Iv Ej Amlof - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition Iijdjvaatlspfx Amlsf

Condition: excellent (used), ALMIG FLEX 15 screw compressor with air dryer, serviced Iisdoyt Hngspfx Amlef Technical data: Capacity: 0.46–2.13 m³/min; Motor: 15 kW; Maximum pressure: 5–13 bar; Operating hours: 27,378 h; Year: 2014 Compressor is fully functional. Net price: PLN 12,700 Gross price: PLN 15,621 Below you will find a link to a video.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Iedpfxoxud Nvj Amloif Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Iisdpfxjy Iamte Amlof

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, tank capacity: 240 l, warranty duration: 6 months, KARCHER IC 15/240 W CITY VACUUM CLEANER NEW STARTER BATTERY 12V 14Ah A vacuum cleaner ideal for cleaning green areas, pavements and squares in municipal and industrial areas Designed for collecting light rubbish such as leaves or large plastic bottles. Perfectly sucks up to Ø100mm dirt from hard-to-reach places. Hydrostatic drive and a large working radius of 3m guarantee high flexibility and ease of use of the vacuum cleaner Warning lamp for work in public utilities Electric and manual engine start Honda GX160 combustion engine after a complete belt and oil service You are buying exactly the machine you see in the pictures, other models are available on our other auctions, to which we cordially invite you TECHNICAL DATA: Honda GX 160 petrol engine Power (kW): 4 Working speed (km/h): 6 Working time on one refueling: 2.5h Contamination tank capacity (l): 240 Max. load weight (kg): 70 Ability to overcome slopes (%): 15 EQUIPMENT: NEW STARTER BATTERY 12V 14Ah NEW Suction pipe 3m, Ø100mm with comfortable handle NEW Waste bin (240 liters) Operating hours counter Warning light (rooster) Isdpfxjwmadvo Amlsif

Condition: new, Lubrix MQL system 0003055 (M12) G 1/2 DN 15, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ijdpfx Amji Eby Solsif

Condition: used, Year of construction: 2010, operating hours: 40 h, load capacity: 1,500 kg, lifting height: 2,200 mm, fuel type: diesel, construction height: 2,240 mm, gearing type: automatic, Equipment: head guard, * Protective/weather cover * Rotating beacon * LED work light * Manually adjustable forks * 3-cylinder diesel engine * 17 kW / 23 hp * 2200 mm lifting height * 1500 kg load capacity * 1340 kg dead weight Internal vehicle numbers: 8741, 8663, 8661, 8660, 8659, 8658 8657, 8656, 8655, 8511, 8475, 8473, 8472, 8471, 8470, 8469 More than 15 available. Please inquire for further images. Iisdpfozu H D Asx Amlof Errors and prior sale excepted.

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Iiedpfxog U Uv Rs Amlef Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -