Used Hot Former for sale (3,769)

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Bdjdod H Ur Ajpfx Akqjd Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Bdsdpfxjxwy Aqe Akqod Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Condition: used, Vertical hot water tank with internal heating coil for heating with steam. Capacity approx. 30 hl. Additional title: Heatable tank Content approx.: 3000 l Bdsdsw Tdx Aopfx Akqjd Width: 1400 mm Height: 2800 mm Material: stainless steel Position: free standing Base construction: Cylindrical tank on pipe feet Features: 1 tank with heating device, temperature gauge, outlet in the centre of the base, manhole at the top, overflow

Condition: used, functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: RAS, controller model: 4,0, working width: 3,200 mm, lower beam adjustment: 650 mm, folding beam adjustment: 150 mm, installation height: 2,200 mm, throat depth: 1,000 mm, bending angle (max.): 180 °, bending radius (max.): 25 mm, bending radius (min.): 1 mm, operating speed: 120 mm/s, reverse speed: 200 mm/s, number of axes: 4, type of crowning: CNC-controlled, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 3,250 mm, overall weight: 11,500 kg, total length: 5,600 mm, total width: 3,360 mm, total height: 2,200 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, FOR SALE: RAS XLTBEND 71.30 UPDOWN CNC PRESS BRAKE Price: 250,000 EUR net – negotiable For sale, a high-quality RAS XLTbend 71.30 UpDown CNC press brake from the renowned German manufacturer, RAS Reinhardt Maschinenbau GmbH. This machine is designed for the professional production of components from steel, stainless steel, and aluminum sheets. The UpDown technology enables bending upwards and downwards without the need to rotate the workpiece, which significantly reduces production time and increases efficiency. TECHNICAL DATA: • Working length: 3200 mm • Max. sheet thickness: mild steel: 3.0 mm stainless steel: 2.0 mm aluminum: 4.0 mm • Beam opening height: 150–650 mm • Automatic adjustment of bending parameters via CNC • Servo drives for working axes • Beam-in-Beam technology for very high bending precision • CNC control with 3D visualization EQUIPMENT: • XLTbend CNC control • Two 24" touch screen monitors • Import of STEP, DXF, GEO files • Automatic generation of bending programs • 3D bending process simulation • "T"-type positioning table • Positioning system with suction cups • Automatic bending sequence • Air-conditioned control cabinet • Safety and diagnostics system ADVANTAGES: • Very high production efficiency • Minimization of operator involvement Bdodszfvkgepfx Akqjd • Ability to produce complex parts without repositioning the sheet • Ideal for the production of enclosures, cassettes, control cabinets, ventilation elements, and sheet metal structures Condition: very good Location: Skarżysko-Kamienna, Poland Price: 250,000 EUR net – negotiable Contact: Kamil Wiatrak

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Bdedpfoy I Sncjx Akqod Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us. Bdjdpfx Aksd Dczzeqed

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE MANUFACTURER - HYDROMEC YEAR - 2000 Bjdpfx Akozad Nhjqodd SERIAL NUMBER - 660 MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Bodpfx Astph A Nekqsdd

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer Bdodpfxjy Umkfs Akqjd – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Bedpfx Aowfzzmskqodd Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Good working and cosmetic condition. Bdodpfx Akjxzg N Eoqjd The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg Bdedpfx Akefh Skaeqod - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN Bjdpezif Sofx Akqsdd

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 2,350 mm, total width: 450 mm, total height: 1,200 mm, input voltage: 400 V, power: 0.75 kW (1.02 HP), Rare opportunity to acquire a near-new bagel former well below new-equipment cost. This Gulliver BF-80 was built in 2023 and has seen very little operating use since, leaving it in very good overall condition with plenty of working life ahead. The BF-80 shapes bagel dough into consistent, uniform rings, removing the need for labor-intensive hand-shaping and helping bakeries scale up production without sacrificing quality or consistency. Specifications Manufacturer: Gulliver Model: BF-80 Year of construction: 2023 Operating hours: very low Condition: very good, fully functional, ready for immediate use Bdedpozdthgsfx Akqod Viewing welcome, and further photos available on request. Contact us with any questions.

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Bjdpfx Akeiz Ddksqjdd

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Bedpfeq U R T Njx Akqedd Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Bodpfx Asq U Sa Sskqjdd Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: new, Year of construction: 2026, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBE FORMER Designed for the production of round SPIRAL-type ducts. The produced duct complies with DIN EN 12237, Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: Bedpfewa Skhox Akqedd For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment Bjdjxwmf Sopfx Akqsdd - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Bdodpjy Nzhbefx Akqsd Currently physically located at the subsidiary plant.

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable After a thorough inspection, fully functional Bdjdsx Hi R Sopfx Akqod PRICE REDUCED FROM 1550 TO 1250 EUR!!!

Condition: ready for operation (used), ECKOLD - KF 653 C / Kraftformer - Throat depth – horizontal approx. 600 mm - Throat depth – vertical approx. 480 mm - Working stroke 8 mm - Ram adjustment approx. 80 mm - Foot switch - 1x tool Formable sheet thicknesses: - Steel (400 N/mm²) max. 6 mm - Aluminium (250 N/mm²) 8 mm - Stainless steel (600 N/mm²) 4 mm Dimensions: LxWxH 1.6x0.7x1.9 meters / Weight 1800 kg Bdsdsy Hmi Eepfx Akqjd Errors and omissions excepted

Condition: excellent (used), Voltage 3 x 230 / 400, 45 A 6 sections The appliance has been tested and is fully functional! Bdjdsu Hlr Rspfx Akqsd

Year of construction: 2026, condition: new, stable heating and/or hay drying and hay drying systems and drying cabins, installed in containers, plug-and-play (ready for immediate use, also available for rent), installed in container(s) or on-site in Switzerland and Austria or Southern Germany. Power output from 80kW up to 500kW, and on request >500kW. Hot air heaters in stock, new and used! Pellet heater 200kW, 19,000 m3/hour, inquire about our competitive prices! * Used!!! In stock, 1 x 200kW in a container with a 3-ton storage buffer. * New!!! In stock, 2 x 200kW with a pellet burner. Bedpfokytn Hex Akqjdd Lanox.eu, The Netherlands.

Condition: good (used), functionality: fully functional, Weld edge former - Italy Bdsdpjy Nkbwjfx Akqjd