Used Homag Complete Kit For Manual Handling for sale (33,034)

Condition: good (used), Toolholders bought in company where used for Biglia machine Psdpfx Aoyuyhishlspt

Condition: excellent (used), Year of construction: 2011, 5-axis working center in very good condition. Pjdpfox Ur Iisx Ahlspt Technical data will be updated soon.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION Ppsdoy D A Swjpfx Ahlot BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Pedpfoyy S Adjx Ahlept Total power: 16 kW Length: 4150 mm

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 - Top pressure with composite V-belt Pjdjyz Dbbopfx Ahlspt - Feed rate: 18 - 25 m/min - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit - Drying box with nitrogen

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool Ppodsytf Iropfx Ahlst • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers Ppjdpsywxraofx Ahlst 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 Pjdsyywcvopfx Ahlopt No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Ppodpfoyyvttjx Ahljt Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Ppsdpfx Ahsyyvp Uelet Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Ppodpfx Ahsvnq H Eelot Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount Psdpsy A I Sgefx Ahljpt - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Psdpoxwurysfx Ahlspt Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Pjdpfoyvh Dpex Ahlept

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ Ppedpfjy Thlzex Ahlst - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Pjdpfjyx S N Uex Ahljpt - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. Ppsdpeyhqi Dsfx Ahlst • Condition: Used Additional equipment • BARBARIC workpiece return system

Year of construction: 2019, condition: ready for operation (used), spindle speed (max.): 8,000 rpm, This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine. • Workpiece width after processing: 10–250 mm • Workpiece height after processing: 10–160 mm • Control: PowerControl with powerTouch LPP300 • Feed table length: 2,500 mm • Feed speed: 6–24 m/minSpindles: • First lower spindle: • Motor power: 7.5 kW (Siemens IE3) • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm • First right spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm • Second upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second lower spindle: • Motor power: 7.5 kW, speed infinitely variable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm Pedpfxjygvnpj Ahlopt • Spindle length: 266 mm

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. • Configuration/Features: • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment Podpfx Ajychdujhlept • Workpiece returning system: LIGMATECH

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. Ppjdpfex D Hxfjx Ahljt • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment Pedpsx D Ribjfx Ahlept • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. • Working area: 3000 x 1050 mm Pjdpox D Dvnsfx Ahljpt

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-200-01-2196, functionality: fully functional, input current: 63 A, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,000 mm, total length: 7,850 mm, total width: 2,300 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, Edge banding machine, good working condition, fully electric adjustments, working speed 25m/min, available immediately. Pedpfx Ahoy Ebl Sslopt

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Ppjdpevx Ep Nsfx Ahlet

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Ppodpjyxnapofx Ahlot External reference: 7877