Used Heller Drill for sale (4,979)

Condition: used, Scharmann Drilling Machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Dwedpfx Abszilmrevjb Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Collection in September. Being replaced with a new machine. Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: Dsdpjzrr Uujfx Abvowb - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, total length: 11,850 mm, total height: 4,016 mm, input voltage: 400 V, total width: 3,250 mm, Equipment: documentation/manual, The machine can be inspected during production. A spare spindle worth €10,000.00 and a computer with software worth €3,000.00 will be supplied. Djdpfx Aozvattsbvowb

Condition: excellent (used), FLEXIBLE CNC DRILLING AND MILLING LINE, for drawer fronts (or similar panels) 231200A) Automatic panel loading system, with “KUKA” robot, Mod. KR 120 R3200 PA 231200B) “COMEC” CNC machining centre (panels through-feeding) Mod. Frontal 1000 3S CN CA Gantry (Portal) CNC machine - Overall integral safety cabin (enclusure) of the machine Movable panel (workpiece), horizontal position - Movable working head Panels (workpieces) feeding by motorized belts Djdpfozxn Nzox Abvowb In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 50 x 15 Maximum workpieces dimensions (X - Y - Z) mm 1100 x 350 x 30 Total installed power (Kw) 28 (ca.) WORKING GROUPS 1st station: upper vertical CNC drilling (point-to-point) 2nd station: CNC milling for slots/grooves (with horizontal electric spindle) 3rd station: 2 upper vertical CNC drilling units (point-to-point) 4th station: lower vertical CNC drilling (point-to-point) 231200C) Automatic panel unloading system, with “KUKA” robot, model KR 120 R3200 PA

Condition: good (used), Year of construction: 1987, machine/vehicle number: 640, Offer 26231 Technical specifications: Dwodpfxozwm Uyo Abvjb - Drilling capacity in steel St 60: 45 mm - Drilling capacity in steel St 60: 55 mm - Drill spindle mounting: long spindle, MK 4 - Drill spindle speeds: infinitely variable in 2 speed ranges via AZ gearbox - 40 - 760 rpm - Drill spindle stroke: 140 mm - Overhang: 300 mm - Column diameter: 145 mm - Table with 2 T-slots: 460 x 420 mm - Distance table-drill spindle min / max: 35 / 640 mm - Distance drill spindle – processed base plate: approx. 1150 mm - 3 feed rates: 0.10 - 0.20 mm/rev - Drive: 400 V / 1.8 / 2.9 kW - Quick-change drill chuck - Machine vise - Space required: approx. W 600 x H 1800 x D 950 mm - Weight: approx. 380 kg

Condition: good (used), Storage location: 3132 Manufacturer: WMW Machine number: 1984 Type / Model: BT 2 Drilling capacity: up to 16 mm Spindle mount: Drill chuck Speed range: 355 / 710 / 1,400 / 2,800 rpm Stroke: 100 mm Overhang: 210 mm Table: 340 x 470 mm Head adjustment: 120 mm Total power consumption: 1.1 kW Dedpezx Rtpsfx Abvewb Accessories / Equipment: Drill chuck Condition: very good Weight: 165 kg Dimensions: 480 x 550 x 1,150 mm

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) Dsdpfjzuynhox Abvowb With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Column drilling machine / GILLARDON GB 20 from a university - Stepless speed control - Adapted for MK 3 - Drilling capacity in steel max. 30mm - Arm length 285mm - Drilling stroke 150mm - Table clamping surface 400x400mm - Table height adjustment approx. 650mm - Drilling depth stop - Analog speed indicator - Emergency stop - Work light Dedpfx Aozuz Iiebvjwb - Foot switch - Documentation Dimensions: L x W x H 0.7 x 0.6 x 1.8 meters / Weight 650 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, functionality: fully functional, type of input current: AC, input voltage: 220 V, overall weight: 65 kg, total height: 65 mm, total length: 87 mm, total width: 58 mm, number of spindles: 2, 2-spindle paper drilling machine. Dwodpjzvc Umjfx Abvsb

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 Dwodpfezkq Aujx Abvob - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Dedozkt A Repfx Abvswb Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Dedpfx Aboh Ek H Sovewb Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. Dwjdpfx Asig T Amjbveb 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres Dedpfx Abeq Hgg Uovjwb ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Dsdpfx Aevpafyjbvewb Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit Dwedpsy E N Hdofx Abvsb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. Dwjdpszcqmxofx Abveb 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: ready for operation (used), Alzmetall AB 45 S Pillar Drill Machine, Drilling Machine Speed: 25-640 rpm Overhang: 350 mm Quill stroke: 180 mm Drilling capacity in steel: 45 mm Dimensions: approx. 1200 mm x 800 mm x 2300 mm (W x D x H) Weight: 950 kg You are welcome to come by for an inspection. Dwjdpfx Abszyp Axevob We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, bore capacity in steel (diameter) / mm Dsdey Tbv Topfx Abvewb throat / mm bore stroke 70 mm total power requirement 0,9 kW

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode Djdpfx Abey Hf N Rsvowb - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Dodpfx Abey Hf Rusvowb Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Djdezgaiiepfx Abvewb Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Dwjdpfxozldque Abveb Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Dsdpsznkgnofx Abvowb Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1989, bore capacity in steel (diameter) 30 mm throat 300 mm bore stroke 150 mm cross-moving table 600 x 180 total power requirement 1,5 kW Dwjdpfx Aozmix Hebveb weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 2,2 m