Used Hammelmann Hdp 72 for sale (2,476)

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM Blodpfx Asyzcikeqtsi ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Bsdpfx Aqoihf Ufeteli Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Bsdpfjrn Sqhsx Aqteli Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Bsdpfjixqg Nsx Aqtoli Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Bsdpfx Aeihf Twjqtoli Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: new, functionality: fully functional, We offer a large industrial lot of 970 pcs HDPE jerry cans, professionally manufactured and UN certified (3H1/Y) for transport and storage of liquids. ✔ Capacity: approx. 20 liters each ✔ Certification: UN 3H1 (ADR compliant) ✔ Material: HDPE – industrial grade ✔ Condition: unused (warehouse stored), minor external dust only ✔ With caps ✔ Stackable – stored on pallets Industrial Use Suitable for: chemical industry oils & lubricants agrochemicals industrial liquids logistics & export packaging 👉 These are industrial UN-approved containers, not consumer-grade canisters. Quantity Total: 970 pcs Preferably sold as one complete lot Location 📍 Dunajská Streda, Slovakia (EU) Commercial Terms Inspection possible Loading assistance available Immediate availability EU & export sale possible Important Note Sold as unverified / as-is, however: ✔ visually unused ✔ professionally stored ✔ suitable for industrial reuse Market Reference (key line) 👉 Ideal for companies currently paying 8–12 €/pcs for new UN-certified packaging. Contact Serious inquiries only. Titel 970 Stk. UN 3H1 20L HDPE Kanister – Industrie / Chemie / ADR Verpackung Preis 👉 5.200 € VB Beschreibung Zum Verkauf steht ein Posten von 970 Stück industriellen HDPE-Kanistern, mit UN-Zulassung (3H1/Y). ✔ Volumen: ca. 20 Liter ✔ Material: HDPE (Industriequalität) ✔ Zustand: ungenutzt (nur gelagert), leichte äußere Verschmutzung ✔ Stapelbar – auf Paletten gelagert Einsatzbereiche Geeignet für: chemische Industrie Öle & Schmierstoffe Agrochemie industrielle Flüssigkeiten Logistik & Exportverpackung 👉 Industriequalität – kein Konsumprodukt Menge Gesamt: 970 Stück Verkauf bevorzugt als Komplettposten Standort 📍 Dunajská Streda, Slowakei (EU) Hinweis Verkauf als ungeprüft / wie besichtigt, jedoch: ✔ optisch unbenutzt ✔ professionell gelagert Marktvergleich 👉 Ideal für Unternehmen, die aktuell 8–12 €/Stk. für neue UN-Kanister zahlen. Blsdpoy Nf Irofx Aqtji

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium Bjdpfjwivdkox Aqtsli YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Bljdpfxstzmk Nj Aqtoi Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Belt Width 407mm Effective Belt Width 337mm

Year of construction: 2005, condition: used, A used Gericke CSM 722 - no internal sieve with this machine - is in working condition and mounted on stainless steel frame Ready to Ship Worldwide. Bedpfezc Rbpex Aqteli

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Bledpfx Aqevpv Nuetji

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Bljdpfx Aox Rut Teqtei In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Used Flowserve type 350LNN725 centrifugal pump. Unit is rated 1,800 m3/hr at 37.4m head, 740 rpm. Unit rated 14.9 bar maximum pressure at -30 to 25 deg.c. temperature. Casing is cast austenitic stainless steel (ASTM A744 Gr, CF-8M), shaft is stainless steel (EN 10088 X2CrNiMo17-12-2) and impeller is cast austenitic stainless steel (ASTM A744 Gr, CF-8M). Unit driven by ABB electric motor rated 315kW, 744rpm. Unit is mounted on mild steel frame. Bsdpjzbugtjfx Aqtoli

Condition: used, mileage: 239,950 km, power: 132 kW (179.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,550 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Special equipment: Bodpfezicdujx Aqtsli Storage compartment on the dashboard with USB port, dashboard comfort package, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, automatic climate control, fuel tank: 117 liters, transverse support at the end of the frame, front mud flaps, preparation for telematics system (telematics box) Additional equipment: Driver-side airbag, trailer stability program (TSM), trailer socket preparation, traction control system (ASR), version: C-series, exterior mirrors electrically adjustable and heated, long exterior mirrors, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driver assistance system: hill start assist (AAS), driver assistance system: emergency brake assist AEBS + City Brake, driver assistance system: proactive lane monitoring assistant (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, automatic transmission - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard platform body, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel with road tires, low emission according to Euro 6d emission standard, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat (hydraulic), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle Tail lift Dhollandia 1000 KG The vehicle is in TOP condition! Financing possible through Santander Bank.

Condition: used, mileage: 179,980 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: - Overhead storage in the cab, storage compartment on the dashboard with USB port, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, bodybuilder interface, rear differential lock, automatic climate control, height and reach adjustable steering column (steering wheel), light and rain sensor, cargo area lighting switch, rear cross member at frame end, front mud flaps, cab seats: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer Additional equipment: - Driver's airbag, trailer stability program (TSM), trailer socket pre-installation, traction control system (ASR), model version: C-series, electrically adjustable and heated exterior mirrors, extended exterior mirrors for vehicle width 2350 mm, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), emergency braking assistant AEBS + City Brake, proactive lane departure warning system (LDWS), digital tachograph, front axle suspension: torsion bar, tinted windshield and side windows, alternator 210 A, automatic transmission - Hi-Matic (8-speed), A-pillar grab handle, urea tank (AdBlue): 20 liters, body/chassis: standard flatbed, fuel tank: 90 liters, engine 3.0 l - 132 kW diesel, wheelbase 5100 mm, spare wheel with road tires, low emissions compliant with Euro 6d standard, cab seats: twin passenger seat, maintenance indicator, gross vehicle weight 7.00 t, twin rear wheels on second axle/rear axle Tail lift Palfinger, 1000 kg Cargo area dimensions (internal): L 6.20 m x W 2.46 m x H 2.51 m Payload: 2,600 kg Bedpfx Aqozicdhetsli Service book, next inspection at 198,000 km New TÜV and emissions test available at extra cost Financing available

Condition: used, Year of construction: 2008, total length: 26,000 mm, Colour: White Empty weight: 9.000 kg Price: On request Bjdpjzhr Rzefx Aqtoli - Details: - └ Description: Includes the input/output system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 36 - System/software: WoodWOP - Safety feature: Enclosed fence, Door interlock switches, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: 2BL2141 - └ Connection diameter [mm]: 50 - Tools included: Yes - CNC options: Loading system, Label machine, Manual control, Unloading system, Offcut conveyor - CNC documentation available: USB stick - Table length [mm]: 2500 - Table width [mm]: 1500 - Working range X [mm]: 5800 - Working range Y [mm]: 1600 - Z-axis working range [mm]: 535 - Voltage [V]: 400 - Current consumption [A]: 91 - Installed length [mm]: 12200 - Installed width [mm]: 9000 - Installed height [mm]: 3500 - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Heraeus Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Internal dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Bljdpfxjzh D Rgj Aqtoi Condition: used Scope of delivery: (See images) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 560 kg, machine/vehicle number: RR72ABH-S, SCHORR RR72ABH-S PRO – Professional wood chipper for branches up to 180 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR72ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 180 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the knife disc, even bulky, branched crown material. The infeed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting head with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is rotatable by 290°, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ PTO-powered chipper for tractors from 40 to 100 HP Blsdpfx Aezh Hnnsqtji ✓ Chips branches up to 178 mm in diameter ✓ Hydraulic roller infeed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ PTO shaft included ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR72ABH-S PRO Design: 3-point hitch for tractor 3-point category: Cat 1 & 2 Drive: PTO, direct drive PTO speed: 540-1000 rpm Recommended tractor power: 40-100 HP Infeed: Hydraulic roller infeed, forward and reverse function via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 178 mm Flywheel diameter: 740 mm Flywheel weight: 95 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 560 kg Packaging dimensions: 1950 × 1150 × 1300 mm The RR72ABH-S PRO is designed for long-term use. All components are easily accessible, making maintenance work quick and easy. Spare parts are always available in stock. If desired, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please feel free to contact us.

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, Equipment: air conditioning, = Additional options and equipment = - Leaf suspension - Sleeper cabin = Notes = Fuel tank: 680 ltr. Air conditioning Fifth wheel: 3.5 inch Fifth wheel height: 1,480 mm Cab air suspension Roof spoiler Sleeper cabin with one bed Fridge Radio with Bluetooth and DAB = Further information = Transmission: TX-16M, automatic Tyre size: 315/80R22.5 Bjdoxg Hnropfx Aqteli Suspension: Leaf suspension Front axle: Steering Gross vehicle weight (GVW): 32,000 kg

Condition: new, power: 349 kW (474.51 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: fridge, = Additional options and accessories = - Leaf suspension = Notes = Bsdpfsw N Rupex Aqtsli Fuel tank: 680 litres Air conditioning Cab air suspension Roof spoiler Refrigerator Bluetooth DAB radio = Further information = Transmission: 16-speed manual Tyre size: 315/80R22.5 Suspension: leaf suspension Front axle: steered Gross vehicle weight: 32,000 kg

Condition: new, power: 349 kW (474.51 HP), fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: air conditioning, = Additional options and equipment = Bedpfxjyxmcio Aqtjli - Leaf suspension - Sleeper cab = Further information = Transmission: 16S2520TO, manual gearbox Suspension: leaf suspension Front axle: steered

Condition: new, power: 349 kW (474.51 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories = - Leaf suspension Bedpfx Aqeymm Efjteli - Sleeper cab = Notes = Fuel tank: 390 ltr. Air conditioning Fifth wheel: 3.5 inch Fifth wheel height: 1,600 mm. = Further information = Transmission: ZF16S2520TO, 8-speed, manual gearbox Year of manufacture: 2024 Tyre size: 14.00R20 Suspension: leaf spring Front axle: steered

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, = Additional options and equipment = - Leaf suspension - Sleeper cab Bjdpfxoyxl Tmo Aqtjli = Further information = Transmission: TX-16M, automatic Year of manufacture: 2026 Tyre size: 315/80R22.5 Suspension: Leaf suspension Front axle: Steered Gross vehicle weight: 32,000 kg

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 728 253-01, Serial No.: 39240185B – complete overhaul and testing performed professionally, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Bsdozhqtzjpfx Aqtsli

Condition: ready for operation (used), Heidenhain UVR 140D ID: 728 253-01 SN: 39240185B – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not show any mechanical damage, such as fractures, as these can no longer be repaired. In this case, an additional charge of €600 including VAT will be applied. Bjdpfx Aqozhqt Ietoli Attention: You are bidding on a Heidenhain inverter, model UVR 140D, ID: 728 253-01, SN: 39240185B, offered as an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600 including VAT will be issued.

Condition: ready for operation (used), Siemens 1PH6107-1NF47-2AA0 AC-HSA motor, serial number: EJ899151601007, with ERN 1387 2048 SIG/R encoder, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Bjdpfszhqqysx Aqtsli