Used Grinding Wheel Holder for sale (27,641)

Condition: like new (used), Grinding wheels, grinding stones, grinding media Various manufacturers, in-stock items Outer diameter from 20 mm to 500 mm Inner diameter from 10 mm to 270 mm Various widths from 3 mm to 130 mm Pjdpfx Asgny H Del Nspu Number of grinding wheels: 1952 pieces

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm Ppodpfx Ajyv Iqvjl Neu 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Grinding wheel dressing machine for dressing grinding wheels up to a diameter of 450 mm Easy to operate, robust, and precise Our grinding wheel dressing machine offers an unbeatable combination of ease of use and exceptional stability. The solid granite base ensures maximum precision and durability, while the user-friendly operation maximizes efficiency in your production. While you continue production on your tool grinding machine, our dressing machine saves you time – and therefore reduces costs. Ppsdpfx Aoy Anykel Nju

Condition: like new (used), functionality: fully functional, As-new grinding wheels without wheel flanges. Sound test has been performed, everything is in order. Ppedpjx Npaxsfx Al Nsu

Condition: good (used), Manufacturer: presumably Kellenberger Year of manufacture: Stations: 9 Pjdpsxwm S Eefx Al Njpu Diameter of mounting taper: 40 to 50 mm Max. disc diameter: 500 mm Footprint: 550 x 550 mm Height: 1,800 mm Weight: 85 kg

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Ppedpfx Asyh Rkljl Nju Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Condition: as new Category ID: 1166 Type ID: 307 Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Various grinding wheels, new and used Ppsdpfx Aloyn Ihkj Nsu

Condition: used, used Michael Deckel S11 - fully functional Pedpjx Hyn Isfx Al Nspu

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition. Pjdpfx Aljycq Hro Nspu

Condition: new, Year of construction: 2026, functionality: fully functional, CBN Borazon Grinding Wheel for CORMAK DG13M Drill Sharpener – precise and durable grinding disc High-quality CBN borazon grinding wheel dedicated to the CORMAK DG13M drill sharpener is a consumable element that directly affects sharpening quality and the service life of cutting tools. It ensures precise HSS drill sharpening across the full range handled by the machine. Its construction is optimised for demanding workshop and industrial conditions, offering high efficiency and minimal abrasive wear. Main product advantages Pjdpfeycqt Sex Al Nopu Dedicated to the CORMAK DG13M sharpener – ensures perfect fit and optimal operating parameters. CBN (borazon) abrasive material – optimal for sharpening HSS high-speed steel tools. Vibration-free operation – high dynamic balance of the wheel eliminates vibrations and improves sharpening quality. High durability – significantly outlasts standard aluminium oxide wheels. Stable sharpening parameters – ensures repeatability and accuracy even during series regeneration of drills. Construction and technology CBN wheel (Cubic Boron Nitride) is the second hardest abrasive material after diamond, yet far more resistant to temperature and wear when working with HSS steel. The specialised bond and precise geometry make it ideal for applications in sharpeners such as the CORMAK DG13M, where edge accuracy and long tool life are essential. The wheel is optimised for direct mounting on the machine spindle axis, ensuring minimal runout and reliable grinding performance. Precision and work efficiency The use of a CBN wheel in drill sharpeners such as the DG13M results in significantly improved operating parameters: shorter sharpening time, lower tool temperature and reduced risk of burning. The high rigidity of the abrasive allows for a uniform and sharp cutting edge while maintaining the correct rake angle and drill geometry. This makes drill sharpening more repeatable and efficient. Ensure the highest sharpening quality – choose a grinding wheel for the CORMAK DG13M sharpener Replacing a worn wheel with the original CBN borazon grinding wheel ensures optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you minimise downtime and improve process performance. Order now and restore full precision to your CORMAK DG13M drill sharpener!

Condition: excellent (used), Year of construction: 2024, operating hours: 12,675 h, functionality: fully functional, A total of four identical KAPP gear grinding machines are for sale. KAPP NILES KX 260 TWIN Machine type: CNC gear grinding center / hobbing and profile grinding machine Manufacturer: KAPP NILES GmbH & Co. KG Number of machines for sale: 4 Address according to nameplate: Callenberger Straße 52, 96450 Coburg, Germany Model: KX 260 TWIN OEM machine number: XXX Year of manufacture: 2024 Inventory No. PPS: XXX Control: Siemens SINUMERIK Machine concept: TWIN / dual-spindle concept with rotary table Machining process: continuous hobbing grinding, optional profile grinding Automation concept: automatic loading, robot cell / FANUC loader visible Robot: FANUC Robot M-710iC/45M visible Condition: machine is powered on / screen is active / very modern, clean overall impression Manufacturer's specifications KX 260 TWIN Max. face diameter: 260 mm Max. workpiece length: 770 mm Module range: 0.5 – 6 mm Max. gear width: 320 mm, with corresponding design up to 520 mm Max. helix angle: ±45° These values correspond to the KAPP-NILES-KX-TWIN series; KAPP NILES describes the KX 260 TWIN as a machine for continuous hobbing grinding with dressable and undressable tools and specifies exactly these limit values for the KX 260 TWIN. Technical machine concept According to KAPP NILES, the KX TWIN series is designed for high production volumes in the medium and large series production of gears and shafts. The concept includes two identical workpiece spindles, which are arranged opposite each other on a rotary table. While one workpiece is being machined, the second workpiece spindle can be loaded and unloaded in parallel and aligned. Equipment / visible features Siemens SINUMERIK CNC control KAPP NILES operating interface TWIN spindle concept / two workpiece spindles Rotary table / indexing table Automatic loading cell FANUC M-710iC/45M robot Robot gripper / handling gripper visible Protective housing / safety cell Grinding wheel mounting / grinding spindle area visible Profile / hobbing grinding area visible Coolant / grinding oil area Work area lighting Full protection cabin Ppjdpfxozdv Shs Al Neu Manual control unit / electronic handwheel on the control panel Signal light / traffic light CE marking visible on the machine housing Documentation holder / machine documents visible on the machine Electrical data according to nameplate Normal supply: 400 V AC Frequency: 50 Hz Normal power supply voltage: 400 V AC Control voltage: 24 V DC Lighting: 22 W / 230 V Installed power: 110 kVA Rated current: 79 A cos φ: 0.64 Fuse: 100 A gL Control cabinet weight: 1,000 kg Operating hours according to the counter in the photo T1 Total operating time: approx. 12,675 h T2 Net operating time: approx. 5,538 h Additional photos and videos available upon request.

Condition: excellent (used), Year of construction: 2011, operating hours: 72,728 h, TECHNICAL DATA WILL ONLY BE SENT BY EMAIL. Pjdpfx Aljzav Nms Nspu

Condition: excellent (used), Year of construction: 2011, operating hours: 79,920 h, Technical data will be sent by email. Ppjdpezav Ipjfx Al Nsu

Condition: used, functionality: fully functional, first registration: 09/2019, fuel type: diesel, color: orange, fuel: diesel, operating hours: 787 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, - Enhanced drive system - 3-dimensional, double-acting front lift - Active hydraulic tilt adjustment - Electro-hydraulic implement relief - Locking block - Mechanical PTO shaft, front, 1000 RPM - Flow rate regulator 1 - Implement adjustment pump - Wiring harness for implement coding - Hydraulic kit 2 - Tire 31x10.5 R15 - Narrow track fender / edge protection (1 set) - Comfort package + winter package - 2 x work lights, rear and front - LED rotating beacon - Cabin mounted centrally - 40 mm - Hydraulic tilting mechanism for cabin - 7-pole socket, front - Reinforced wheel load equalization - Hydraulic tilting mechanism List price Holder C65 DC - €114,188.74 The following options are available at an additional cost: 1. ADDITIONAL COST FLATBED DEMONSTRATION UNIT Flatbed 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750.00 plus VAT 2. ADDITIONAL COST DRAWBAR, NON-SELF-ADJUSTING HEIGHT ADJUSTABLE - DEMONSTRATION UNIT €470.00 plus VAT 3. ADDITIONAL COST Ppjdpfxezf Amzs Al Nsu Retrofitting of manual central lubrication system €1,600.00 plus VAT 4. ADDITIONAL COST HYDRAULIC REAR PTO SHAFT €1,990.00 plus VAT Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: used, power: 33 kW (44.87 HP), Year of construction: 2010, operating hours: 2,910 h, Equipment: cabin, front linkage, * Stoll vacuum superstructure with supports * Flatbed body * Articulated steering * Front attachment with hydraulics & PTO * Rear mounting bracket with PTO * Work lights & beacon * 3000 kg permissible total weight * 31x15.50-15 tires -----Errors and prior sale excepted Vehicle number 5058 Pjdpfx Aljvhv Sms Nspu WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including hitch, CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, circuit 2, with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leak oil line to the front and rear Hydraulic tipping mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick-release couplings at the front - 2 quick-release couplings at the rear, connected to the front couplings via a T-piece - Small joystick including floating position for front lift TIRE 31x10.5 R15 Total outer width 120 cm (narrow), 140 cm (wide) when mounted Fender kit, narrow Multifunction joystick Flat roof (154116) Cabin mounted in the center Hydr. tipping mechanism for cabin Holder platform body, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning marking The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42 940 mm Serial no. 1733 For Holder Tipping platform body, combined (NEW), for sand, gravel, possibly salt Rear light design as on the vehicle Paint: RAL 2011 Roller width: approx. 940 mm Spreading width: approx. 1250 mm Weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab Proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 Switching off the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width Ppodpfx Aozd Riusl Neu hydraulic central drive – Serial No. 980 Hummel MS-M1450HO front sweeper Front lift, CAT 1 Central drive hydraulically via 3/4" chain Dirt sweeping roller Support legs 1 adjustable heavy-duty wheel in the center Horizontal adjustment Hydraulic swivel Hoses and couplings Subject to change, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made excluding any guarantee or warranty.

Condition: used, mileage: 4,911 km, power: 26 kW (35.35 HP), first registration: 06/1991, fuel type: diesel, empty load weight: 1,365 kg, maximum load weight: 635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, suspension: other, number of seats: 1, total length: 3,000 mm, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Psdpfx Aoxufn Tol Njpu

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear Pedpfxozd D R Ee Al Nopu - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 128 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment Ppedpfezd Dzdsx Al Nou for tilt adjustment Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Pedpfjzdkc Uox Al Nopu Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Ppjdpozdizvefx Al Neu Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), fuel type: diesel, Year of construction: 2019, operating hours: 840 h, Equipment: all wheel drive, car registration, soot filter, HOLDER C65 SC Municipal utility vehicle with mowing equipment Accessories: 1. WICKE FSML-165 mower with a maximum cutting width of 165 cm 2. STOLL Type 3000 container with a volume of approximately 1500 liters Ppodpfxjzcv Syj Al Nou This HOLDER C65SC utility vehicle was first put into operation in 2019 and has only 840 operating hours according to the meter. It is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. - Net price: €41,932 // Gross price: €49,900 - Inspection / test drive is possible at any time - Shipping can be arranged nationwide; costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Pedoxx Uudspfx Al Nspu Inspection and trial run possible by appointment. Please contact us for more information.

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Ppodpfxsvictmj Al Neu

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder Ppsdpjxv A Nqsfx Al Nou The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​