Used Falach Briquetting Press for sale (12,103)

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Pgjdpfsfci D Aex Ac Aet Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Pedpfevrvfnsx Ac Aegt Technical data: Motor output power 100% ED 11 kW Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Pjdpjd Nnwlsfx Ac Aogt Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear Pgsdpfx Acjchqxxe Ajt

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. Pgedpfx Acenxkrbs Ajt - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Pgodoz Dn Huopfx Ac Ajt Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Pjdpod Nm Siefx Ac Aogt Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Pgodpfx Aeffh Atoc Ajt Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm Pgsdpfx Aezrpt Uoc Aet table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ Pgedpfx Ajxuhw Dec Aet ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards CNC Cybelec 880s Throat 250.0 mm Vertical stroke 200 Working speed 100mm per/sec Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent Pgsdpfx Asztl Nzsc Aet can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Podpfsyh I Tksx Ac Ajgt Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: good (used), Year of construction: 2000, Morgan Rushworth NC Downstroking Pressbrake – Year 2000 Pgsdpexau Elsfx Ac Ast 120 tonnes x 3000 mm. NC Backguage. Safety Guards. Top and Bottom Tooling and Toolholders.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 26,000 h, power: 34 kW (46.23 HP), pressing force: 400 t, stroke length: 365 mm, operating speed: 9 mm/s, reverse speed: 90 mm/s, clearance between the columns: 4,600 mm, total length: 6,130 mm, total width: 2,995 mm, total height: 3,680 mm, overall weight: 36,700 kg, Press brake BYSTRONIC - Xpert 400 MACH-ID 9798 Make: BYSTRONIC Type: Xpert 400 Control: MMC-Bend Year: 2010 HA4 backgauge X, R, Z1 and Z2 WILA NewStandard Top Tool clamping Power on Hours 26.000 H PILZ Laser safe  2 x Arm on front 1000 mm Max. bending length: 5100mm Distance between column: 4600mm Max. pressing force: 400T Dis. Beam - Table: 650mm Beam stroke: 365mm Table Width: 280mm Troth beam: 410mm Approch speed: 120mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1, Y2, X, R, Z1, Z2 Pedpfx Acszxq Ere Aogt Control: MMC BYBEND 7.7.0.0 Crowning: Yes Hydraulic toolclamping: Wila New Standard Power: 34kW Length: 6130mm Width: 2295mm Height: 3680mm Weight: 36700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. Pgodpfoy Egz Sjx Ac Ajt The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: refurbished (used), Year of construction: 2008, Used AMADA press brake: Illustrative image, machine in stock but not yet prepared. It will be in the same condition once it has been refurbished. Year: 2008 Type: HFE400-4L Capacity: 4000 x 400T Number of axes: 6 Stroke of cylinders: 350 mm Rapid traverse speed: 100 mm/sec Installation of new, high-tonnage tooling along the entire length Machine completely refurbished upon order. Pgodpfx Aozbg Sbsc Ast

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Psdpfx Aezyl Htoc Aegt Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Used machine Pedpfxezyy Ape Ac Asgt Equipment and technical data:

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Psdpfxjxabnae Ac Ajgt Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Year of construction: 2025, condition: new, length 3100 mm height 120 mm width 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on Request V-Openings: - 80.0 mm / 85° / R 10.0 with guide rollers - 50.0 mm / 85° / R 5.0 with guide rollers - 35.0 mm / 85° / R 4.0 Pjdpfsxxml Ijx Ac Asgt - 22.0 mm / 85° / R 2.5 - 2x Mounting Screws incl. Link Chain

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. Psdpfsxaayhsx Ac Aegt dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, Pressing screw REG-MAC Psdpfx Aezy Hhlec Ajgt for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: used, System: Mobile chamber filter press, used Type: Netzsch Area of application: Sludge dewatering Pgodpfx Acswf Uuae Aet Commission No.: 040.087 Filter plate format: 1200x1200 Number of plates: approx. 95 Filter plates: PP Filter cloths: optionally available depending on the medium Filter area: approx. 230 m2 Press capacity: approx. 3400 dm3 Filter pressure: approx. 15 bar Year of construction: 1993 Length: approx. 16 m Width: approx. 3.25 m Height: approx. 2.97 m Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspections of the systems are available by appointment at our factory.

Condition: used, System: Mobile chamber filter press, used Type: Passavant Area of application: Sludge dewatering Filter plate format: 1500x1500 Pjdpfx Acowimmco Asgt Number of plates: Optionally with 77 cast iron plates or 88 PP filter plates Filter cloths: Optionally available depending on the medium Filter area: approx. 310 m2 Press capacity: approx. 43,000 dm3 Filter pressure: approx. 15 bar Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pgedowqydwspfx Ac Aet Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.