Used Danfoss Solenoid for sale (494)

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation Cedpfx Ajxrb Tgem Rorc - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,573 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,444 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic / single-pedal version Condition: Refurbished, no warranty Technical condition: good Front tyres type: Superelastic Front tyres size: 27x10-12 NEW Front tyres condition: 80 - 100% Codpfjy Uz Tbsx Am Rsrc Rear tyres type: Superelastic Rear tyres size: 23x9-10 NEW Rear tyres condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection book. For further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Please visit our homepage at fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as delivery under favourable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The listed operating hours were recorded as of the listing date. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Durwen fork positioner with separate sideshift 3rd valve, 4th valve, rear work light, front work light, half cabin, solenoid valve, diesel particulate filter, air conditioning, full free lift, safety light, seat heating, Partial cab with door on the right, super comfort air-suspended seat, seat heating.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Credpoy Tiaasfx Am Rjc Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules Csdpfx Ast Nfarom Rjrc • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Crodpfx Aoxb D Rasm Rsc Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Crodpoy Dvpvefx Am Roc Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, - RIS AG Series Cjdpfxoy Ic D Us Am Rerc - Clean water at +1°C - External dimensions (W x D x H): 1500 x 2600 x 2300 mm - Tank volume: 3,000 L - Power: 5 kW - Power supply: 400 V - 3 Ph - 50 Hz - Maneurop refrigeration unit --- Type: Ris AG 30 --- Power: 380 V - 3 Ph - 50 Hz --- Serial number: 1299 --- Refrigerant: R22 - Pump flow rate (for information): from 4 m³/h at 4.5 bar to 12 m³/h at 3 bar - Store power for peak demand - Allows acceptance of warm return flows at the start of the cycle - Store energy cost-effectively, either by direct expansion or glycol water - Unit can be supplied with or without refrigeration group - Monobloc tank, ready for connection - Polyester tank insulated with polyurethane foam - Stainless steel 316L grid-type heat exchanger - Glycol water heat exchanger at -8°C or with a direct expansion refrigerant - Regulation solenoid valve (glycol water version) or thermostatic expansion valve (direct expansion version) - Chilled water distribution pump with safety by-pass, flow regulating valve and pressure gauge - Agitators - Drain valve, overflow - Automatic water make-up - Return loop standby - Service hatches - Power and operation management electrical cabinet Overhauled equipment: units are serviced and prepared to order; delivery and collection times are arranged at the time of order (please request a price quote after overhauling).

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 5 h, load capacity: 6,000 kg, lifting height: 5,600 mm, fuel type: diesel, mast type: simplex, construction height: 3,700 mm, power: 86 kW (116.93 HP), fork carriage width: 1,800 mm, empty load weight: 11,000 kg, total length: 3,350 mm, drive type: Diesel, construction width: 1,850 mm, Diesel forklift Load center: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Hydrostatic Speed class: 15 Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Credpoy Scuhofx Am Rjc Front tires size: 355/65-15 Rear tires type: Superelastic Rear tires size: 300-15 Description: Displayed operating hours (hour meter replaced); inspection by appointment; transport available. For further questions, please call. 3rd valve, rear work lights, front work lights, roof cover, front windshield, half cabin, solenoid valve, windshield wiper, seat.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 6,724 h, load capacity: 3,500 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, power: 39 kW (53.03 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 5,135 kg, total length: 2,700 mm, drive type: Treibgas, construction width: 1,250 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Cedpoy Scubsfx Am Rerc Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 23x9-10 Description: Read operating hours. Inspection by appointment. Transport can be arranged. For further questions please call. Sideshift, 3rd valve, 4th valve, rear work light, front work light, roof cover, front windshield, half cabin, heater, solenoid valve, full free lift, joystick control, beacon, windshield wiper, seat,

Condition: used, Year of construction: 2005, machine/vehicle number: LC561, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The Used UHT Milk Preparation Room Tetra Pak 6600 L/h provides a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavored beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbiological efficiency. Moreover, its modular design allows it to operate at 2640 L/h, 3850 L/h, and up to 6600 L/h in full configuration. Therefore, it adapts well to varying production demands. Homogenization Section Crodpfxowqxhhj Am Rjc At the core of the Used UHT Milk Preparation Room Tetra Pak 6600 L/h lies a Tetra Pak homogenizer, model Tetra Alex, which ensures effective fat globule size reduction and consistent product texture. As a result, it stabilizes complex emulsions such as flavored milk or drinking yoghurt and prevents phase separation during storage. Importantly, this homogenizer is non-aseptic and operates upstream of the UHT sterilization process, which eliminates any microbial load introduced during homogenization. Furthermore, the homogenizer supports high working pressures and simplifies maintenance. In addition, the robust construction ensures long-term reliability. Integrated Deaeration System The system includes a Tetra Pak deaerator (2005) equipped with an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product before thermal processing. Consequently, it improves product stability and reduces oxidation. Additionally, the vertical configuration ensures efficient gas separation. Meanwhile, the design minimizes product loss and guarantees a continuous flow to the next stage. High-Performance Tubular UHT Module Thermal sterilization occurs through a tubular UHT heat exchanger, manufactured by Tetra Pak and model Tetra Therm Aseptic. In particular, this component sterilizes products via indirect heat exchange while preserving organoleptic properties. Importantly, the module includes a holding coil to maintain temperature over a defined time span. Thus, it complies with food safety regulations and ensures microbiological safety. Similarly, its modular design allows for easy integration into existing lines. Electronic Control and Automation The line features an electrical control panel, a Siemens PLC, and operator panels for precise management of each phase. Notably, it includes detailed electrical schematics, Festo pneumatic valves, and Danfoss inverters to dynamically control pumps and heat exchangers. As such, the automation enables continuous processing. Besides, it optimizes the CIP cycles, reduces downtime, and enhances traceability. Above all, it ensures reliable performance across diverse operating conditions. Conclusion In summary, the Used UHT Milk Preparation Room Tetra Pak 6600 L/h offers a complete, high-efficiency system for preparing UHT milk and beverages. Thanks to its top-tier components and scalable design, this line stands as an ideal choice for dairy producers. Whether the goal is reliability, hygiene, or adaptability, this solution meets strict industry standards. Finally, the system remains in storage and is available for immediate installation.

Year of construction: 1996, condition: used, Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Cjdpfx Ajk Abrysm Rorc Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000++ and more For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Credewq Sv Espfx Am Rsc Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 94 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,181 mm, Rigid telehandler Technical condition: New Front tyres condition: 80 - 100% Codpjvgh Rfsfx Am Rsrc 3rd valve, rear work light, front work light, heater, solenoid valve, soot filter, full cab, CE certificate, engine heater, roof window wiper

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 32 h, load capacity: 1,250 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,930 mm, empty load weight: 2,750 kg, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Technical condition: very good Front tyres type: pneumatic Front tyres size: 31X15-15 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 31X15-15 Cjdpfevgh R Eex Am Rorc Rear tyres condition: 80 - 100% Quick coupler, 3rd hydraulic valve, rear work lights, front work lights, heater, solenoid valve, fully enclosed cab, CE certificate, safety light. Image may be for illustration purposes. Rubber floor mats, air-suspended seat with textile cover (Grammer Pack Comfort version), EN 15000 Easy Link standard module, cab with heater, roof and rear window wipers, sun visor on front windshield and roof, height-adjustable steering column, car radio tuner 50W, wheel chock, TÜV prep, 25 km/h, rear and roof window wipers, LED beacon, compact road lighting front and rear, solenoid valve for 1st function, hydraulic quick coupler system, sun visor on windshield and roof.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91149148, Year of construction: 2020, operating hours: 8,494 h, load capacity: 1,600 kg, lifting height: 7,400 mm, free lift: 2,356 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, power: 6 kW (8.16 HP), gearing type: hydrostat, battery manufacturer: Jungheinrich, battery model: 48V 5 PzS 775, battery capacity: 775 Ah, battery voltage: 48 V, battery weight: 1,119 kg, DGUV certified until: 02/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), overall weight: 3,906 kg, empty load weight: 2,787 kg, total height: 3,000 mm, color: yellow, Equipment: CE marking, UVV, adjustable boom, fork extension, full service history, lighting, pallet forks, retractable fork, seat heater, sideshift, Price: €9,500 net / per unit €11,305 gross / per unit 4 units available with similar operating hours, identical batteries & condition. SKUs: 754,755,756,757 Basic Information: - Manufacturer: Jungheinrich - Model: ETV 216 L GNEDZ - Year of manufacture: 2020 - Key hours: 8,494 h Crodpjy N D R Eofx Am Rsc Technical Data: - Drive: Electric - Transmission: Electric - Pedals: Single pedal control - Controls: Solopilot - Steering: 360° steering - Battery: 48V 5 PzS 775 Ah (KW37/2020) - Charger: Included Mast / Dimensions: - Overall height: 3,000 mm - Lift height: 7,400 mm - Free lift: 2,356 mm - Mast type: Triplex mast - Fork length: 1,150 mm - 1,900 mm (hydraulic reach forks) - Rated capacity: 1,600 kg - Load centre: 600 mm Tyres: - Type: Vulkolan, as new Hydraulic equipment: - Sideshift: Yes - Fork positioner: Yes - Reach forks: Yes - Pallet stabilizer: Yes (Opening range 155 mm - 520 mm) [Griptech with installation declaration] - Rotator: No - Additional hydraulics: 3rd & 4th valve + solenoid valve (all occupied) Features: - Structure: Load protection cage - Lighting: None - Lift height indicator: Yes (from 2,500 mm) - Safety equipment: Spotlight (front & rear), DZH beacon, safety belt - Heating: Seat heating Extras: - New FEM/UVV safety inspection on request - Immediately ready for operation - Viewing & test drive possible onsite by appointment. Transport: Affordable delivery available on request. Invoice with VAT: A VAT invoice is always provided. Battery: For battery-powered devices, we are happy to provide an offer including a new battery upon request. Contact: If you have any questions or are interested, please contact us by phone, e-mail or contact form. Subject to prior sale.

Condition: new, Honeywell Gas Solenoid Valve Crodpszbr I Uefx Am Roc

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Manufacturer: Proval Model: PA125DA Type: Double-acting pneumatic actuator Rotation angle: 90 degrees Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Credjyvabxjpfx Am Rsc Price per piece

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: Crodsy Enr Eepfx Am Rsc • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm Cjdey Atv Ropfx Am Rsrc -Weight: 2.2 kg/pc.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK Credpfxoy Atu He Am Rec -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve Cjdpfx Aoy Atrfom Rerc -Type: D41VW 34 C 4 NJW 75 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 240/95/H185 mm -Weight: 10.8 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8FNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Dimensions: 165/45/H70 mm -Weight: 2.3 kg Crodoy Atqhopfx Am Rsc

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve Cedpfjy Atnmox Am Rorc -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 165/48/H70 mm -Weight: 1.6 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, check valve -Manufacturer: Parker, Unlockable check valve, unused -Type: CPOM2BBV55 -Pmax: 350 bar -Quantity: 1x valve available Codoy Atkhjpfx Am Rjrc -Dimensions: 130/50/H50 mm -Weight: 1.5 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, check valve -Manufacturer: Parker, Pilot-operated check valve, unused, original packaging -Type: CPOM2AAV56X309 Crsdoy Athgjpfx Am Rsc -Pmax: 350 bar -Number: 11x valve available -Price: per piece -Cardboard dimensions: 145/55/H55 mm -Weight: 1.5 kg/pc.