Used Cormak F160 for sale (531)

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. Tedpfx Acsyvp Ngj Teb The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris reduced manual labor and fewer passes required durable, wear-resistant bristles quick installation and convenient operation

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Todpfszarv Asx Ac Teb Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: new, Year of construction: 2026, CORMAK MM950 Belt Edge Sander Key Features Large 850 × 300 mm main worktable provides stable support for workpieces. Adjustable sanding angle up to 90° allows the working position to be adapted to different sanding applications. Additional 340 × 340 mm worktable makes sanding smaller workpieces easier. Rigid steel frame ensures stable material guidance and consistent sanding results. Maximum 3 kW motor power delivers efficient performance under heavier workloads. 150 × 2515 mm sanding belt provides a large working surface for material processing. 110 mm diameter sanding roller expands the machine's range of applications. Ø120 mm dust extraction port allows connection to a dust collection system. Stable 800 × 400 mm base minimizes unwanted machine movement during operation. 400 V power supply is suitable for professional workshops and production facilities. 16 A, 5-pin power plug ensures convenient electrical connection. Applications The CORMAK MM950 Belt Edge Sander is suitable for: sanding straight edges, leveling and smoothing surfaces, sanding workpieces at adjustable angles, Tedpfxsznttks Ac Tsb finishing edges and surfaces, preparing components for further machining, workshop and production applications requiring a large sanding area. The machine is an excellent choice for woodworking shops, manufacturing workshops, craft studios, and companies processing workpieces of various sizes. Standard Equipment Main worktable – 850 × 300 mm Additional worktable – 340 × 340 mm Sanding belt – 150 × 2515 mm 110 mm sanding roller Ø120 mm dust extraction port Heavy-duty steel stand 16 A, 5-pin power plug Technical Specifications Model CORMAK MM950 Main table dimensions 850 × 300 mm Additional table dimensions 340 × 340 mm Maximum sanding angle Up to 90° Maximum motor power 3 kW Power supply 400 V Sanding belt dimensions 150 × 2515 mm Dust extraction port diameter 120 mm Roller diameter 110 mm Power connector 16 A, 5-pin Base dimensions 800 × 400 mm Overall dimensions 1600 × 460 mm Weight 172 kg

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tjdpfx Asycdhpsc Tjb Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Tedpfx Acsycqhcj Tsb Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency Tsdpfx Ajycq Hrsc Tjb The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition.

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H400SA The CORMAK H400SA automatic band saw is a high-performance machine designed for precise and repeatable cutting of large steel components, pipes, and closed profiles. Thanks to its double-column construction and automated operating cycle, it is an ideal solution for production plants, steel fabrication workshops, and logistics centers processing large quantities of material. Main advantages of the machine Fully automatic operation – complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. Hydraulic feeding system and vice – ensure fast, safe, and precise cutting. Arm and vice position memory – reduces cycle time and increases efficiency during serial production. Cooling system and powered cleaning brush – extend the service life of the metal cutting band saw blade. Large cutting capacity – allows cutting materials up to Ø400 mm or 400 × 400 mm. Construction and technology The double-column band saw H400SA is based on a stable steel structure with a cast iron body, ensuring maximum rigidity and effective vibration damping. The saw frame is positioned at a 3° angle relative to the feeding table, which improves cutting performance when processing profiles and structural sections. Precision and work efficiency The hydraulically controlled arm movement with adjustable cutting force and a precision throttle valve allows the cutting pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller enables programming of the cutting length and the number of pieces. The LCD display provides information about the cutting progress, errors, and material availability. The automatic stop system reacts to faults or completion of the programmed cutting cycle, reducing downtime and improving operational safety. Applications The CORMAK H400SA automatic band saw is perfectly suited for: metalworking and steel construction industries, profile and structural section processing centers, serial production in fabrication workshops and industrial plants, companies cutting materials to required lengths. Standard equipment Automatic operating cycle Arm and vice position memory system Hydraulic power unit and feeding system Powered blade cleaning brush Coolant circulation system Bimetallic metal cutting band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Tedpfx Acjyctr Ro Tob Technical data Parameter Value Cutting capacity Ø400 mm or 400 × 400 mm Saw blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Feeding stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 2100 kg

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Simens, controller model: SINUMERIK 808D, total height: 2,700 mm, total length: 2,800 mm, total width: 2,300 mm, table width: 500 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, The machine was purchased in August 2025 together with a lathe – listed in a separate advertisement – and has only been operated for testing purposes (up to 20 hours of operation). Due to a shift in business priorities, we will not be initiating the planned production. Additionally: 12,000 rpm spindle, 4th rotary axis, TS27R tool measurement probe Tjdpjyi Aprefx Ac Teb The machine is under a lease agreement with PKO Leasing S.A. until August 2028. Leasing terms will be provided upon contact. Lease transfer is preferred, although a cash purchase is possible with the lessor's consent.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Tjdpfxjytn Tde Ac Tsb Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: new, Year of construction: 2026, Chiller HL-1500 The HL-1500 ensures stable working conditions for fibre laser cutters up to 1.5 kW by maintaining a consistent coolant temperature with ±1 °C accuracy. Thermal stability translates into consistent cutting edge quality, reduced downtime and extended service life of both the source and the head. The compact housing allows the unit to be positioned close to the machine, while its flow parameters and tank capacity enable safe, continuous operation in production environments. User Benefits Process repeatability – stable temperature means a stable beam and consistent source performance. Component protection – reduced thermal stress minimises component wear. Easy integration – 220 V/50 Hz power supply and standard connectors simplify installation. Operating economy – water cooling reduces the risk of downtime and maintenance due to overheating. Applications Todpfjzff Nrjx Ac Teb Cooling of the laser source and optics/head in fibre laser cutters up to 1.5 kW. Operation in production facilities focused on process continuity and high reliability. Operation It is recommended to keep the system clean and regularly check water level and circulation, which ensures high operational culture and reliability of the entire system. Compact dimensions make maintenance and access to the unit easier during daily operation. Technical Specifications HL-1500 Model HL-1500 Tank capacity 13 L Flow rate (circuit) 33 L/min Quick coupling diameter 1/2" Lift height 30 m Compressor power 2.7 kW Pump power 0.55 kW Refrigerant R-410A, 1800 g Cooling precision ±1 °C Power supply 220 V ±10 %, 50 Hz Dimensions (W×D×H) 620 × 430 × 720 mm Weight 39 kg

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servomotor, UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire for charges for packing and transport separately! Tsdpfxei D Hg Aj Ac Tjb

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / Servomotor, 104-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Tedpfji D Hhrox Ac Teb

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S /527 / 55432-1 servomotor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Tedjk Ru Dcopfx Ac Tsb

Condition: new, Year of construction: 2026, CORMAK S200R Manual Metal Band Saw Tjdpfx Acofy Ttie Tjb The CORMAK S200R metal band saw is designed for both single-piece and series production. With the ability to perform angled cuts from -45° to +60°, it is an ideal solution for cutting pipes, profiles, and solid materials. The construction based on a massive cast-iron arm and a precise blade guidance system ensures high cutting accuracy and repeatability. The feed is gravity-controlled by a hydraulic cylinder with smooth descent adjustment, providing a controlled and efficient cutting process. Main Advantages of the Machine Solid cast-iron construction increases machine durability and cutting accuracy. Wide angle cutting range from -45° to +60° thanks to the rotating arm design. Blade guides with carbide inserts and bearings ensure straight cutting and extended blade life. Gravity feed controlled by a dual-chamber hydraulic cylinder provides smooth and precise cutting. High level of operator safety thanks to limit switches, micro-switches, and an emergency stop button. Automatic stop after completing the cut and blade break protection function improve safety and reliability. Construction and Technology The machine is built on a rigid steel base equipped with an integrated coolant tank and circulation pump. The saw arm is manufactured from a single cast-iron casting, significantly improving stability and vibration damping during operation. The drive system uses a three-phase motor with two blade speeds (36/70 m/min) selectable from the control panel. The arm inclination of 25° relative to the base extends blade life and improves cutting quality. Precision and Work Efficiency High cutting accuracy is achieved through the cooperation of carbide blade guides and rolling bearings, ensuring precise blade alignment. Maintaining optimal blade tension improves cutting efficiency and reduces the risk of failures. The automatic stop function after completing the cut eliminates operator errors and increases workplace safety. The combination of a rigid structure, precise blade guidance, and controlled hydraulic feed guarantees reliable performance in demanding applications. Applications The CORMAK S200R metal band saw is ideal for: industrial production plants, metalworking and fabrication workshops, steel construction companies, maintenance departments. The machine enables precise cutting of: carbon steel, stainless steel, tool steel, closed profiles, solid metal sections. Standard Equipment Mechanical quick-clamping vice Hydraulic cylinder with smooth descent adjustment Blade cleaning brush Coolant pump with closed circulation system Length stop with measuring scale Optional Equipment Material feeding roller system Technical Specifications Parameter Value Machine type Manual metal band saw Cutting method Gravity feed Blade speed 36 / 70 m/min Cutting angle range -45° to +60° Vice type Manual Saw blade dimensions 27 × 0.9 × 2910 mm Motor power 1.8 kW Vice base height 890 mm Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 500 kg

Condition: new, Year of construction: 2026, Electric Mast Pallet Truck Q12E30 The Q12E30 electric mast pallet truck is an innovative solution that combines advanced technology with exceptional ease of use. Its main advantages are a 1200 kg load capacity and a 3000 mm lifting height, making it an indispensable tool for warehouse operations. Thanks to its compact design and a total height of only 2080 mm, the truck is perfectly suited for narrow aisles, limited spaces, and environments with restricted height clearance. It is ideal for use in warehouses, distribution centers, and other logistics environments. Main advantages of the Q12E30 electric mast pallet truck 1200 kg load capacity – enables safe and efficient transport of medium-sized loads, both vertically and horizontally. 3000 mm lifting height – allows convenient lifting of goods to higher storage levels, improving storage and transport efficiency. Designed for narrow spaces – the compact construction allows easy operation in confined areas and passage through standard doors. Polyurethane wheels – provide long service life, excellent wear resistance, and quiet operation, improving working comfort, especially in noise-sensitive environments. High operating safety – equipped with an emergency stop switch, belly safety switch, and LED battery charge indicator to ensure safe operation. Construction and technology The Q12E30 electric mast pallet truck has been designed for intensive operation in demanding working conditions. The 0.75 kW drive motor provides sufficient power for transporting loads, while the 2.2 kW lifting motor enables fast and precise lifting to the required heights. Tsdpfx Acjrh Ey Ue Tjb The truck is powered by two 12V 85Ah batteries, providing long operating time on a single charge. The integrated charger and rectifier allow convenient charging anywhere, reducing downtime caused by lengthy charging processes. The advanced electrical system, durable construction, and precise control ensure reliable operation in warehouses and logistics facilities. Standard equipment Q12E30 electric mast pallet truck with electric drive and lifting system Built-in charger and rectifier Polyurethane wheels ensuring quiet operation and durability Emergency stop switch and belly safety switch “Turtle mode” travel function for precise maneuvering Technical specifications Parameter Value Maximum lifting height 3000 mm Load capacity 1200 kg Load center 600 mm Fork length 1150 mm External fork width 550 mm Height with lowered forks 2080 mm Height with raised mast 3550 mm Lowered fork height 85 mm Overall width 800 mm Overall length 1800 mm Ground clearance 30 mm Turning radius 1390 mm Travel speed with/without load 3.5 / 4.0 km/h Lifting speed with/without load 100 / 200 mm/s Lowering speed with/without load 120 / 100 mm/s Gradeability with/without load 3 / 10% Service brake type Electromagnetic Drive motor power 0.75 kW Lifting motor power 2.2 kW Battery voltage / capacity 12V 85Ah × 2 Wheel material Polyurethane Weight 460 kg

Condition: new, Year of construction: 2026, WRHS 1020 Mast Pallet Truck is a professional device designed for efficient pallet transport and storage in various working environments. With a load capacity of up to 1000 kg and a lifting height of up to 2000 mm, it is a reliable solution for loading and unloading operations in warehouses, construction sites, and production halls. Main advantages of the WRHS 1020 mast pallet truck Load capacity up to 1000 kg – enables the safe handling of heavy loads while maintaining high work efficiency. Lifting height up to 2000 mm – allows pallets to be transported and stored at greater heights, which is especially useful in warehouses with limited space. Adjustable fork width (300–850 mm) – provides versatility and allows handling loads of various dimensions. Hydraulic pump system – enables precise, stepless lowering of the forks, improving operator comfort and ensuring safe load handling. Ergonomic rubber-coated handle – provides comfortable and secure maneuvering of the truck. Polyurethane wheels – ensure smooth movement even on uneven surfaces, increasing operating comfort in different working conditions. Overload protection valve – protects both the device and the operator from excessive loads, ensuring safe and long-lasting operation. Safety foot brake – prevents accidental movement of the truck during breaks or stationary operation, improving workplace safety. Construction and technology of the WRHS 1020 mast pallet truck Hydraulic system and lifting control The specialized hydraulic pump allows stepless fork lowering, providing full control over lifting and lowering operations. This solution enables precise handling of loads and is particularly useful when working with sensitive or delicate goods. Wheels and rollers The WRHS 1020 is equipped with durable polyurethane wheels that provide quiet and stable movement on various surfaces. Thanks to their resistance to wear and mechanical damage, the truck can operate effectively even in demanding environments. Safety system The WRHS 1020 mast pallet truck is equipped with an overload protection valve, which automatically protects the system when the permissible load limit is exceeded. This reduces the risk of equipment damage and improves operator safety. Standard equipment Load capacity: 1000 kg Lifting height: 2000 mm Hydraulic pump with stepless fork lowering Tedpfsricc Esx Ac Tsb Polyurethane wheels ensuring smooth and quiet operation on uneven surfaces Adjustable fork width: 300–850 mm Overload protection valve Rubber-coated steering handle for improved working comfort Foot brake preventing accidental movement of the truck Technical specifications Parameter Value Load capacity 1000 kg Lifting height 2000 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 300–850 mm Distance between forks 230 mm Height with lowered forks 1565 mm Height with raised forks 2545 mm Minimum fork height 90 mm Overall length 1600 mm Overall width 750 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 80 × 60 mm Weight 259 kg

Condition: new, Year of construction: 2026, Electric Pallet Truck with Electronic Scale The electric pallet truck with an electronic scale is an innovative device designed for modern warehouses, logistics centers, and companies involved in goods distribution. It combines the functionality of a traditional pallet truck with advanced weighing technology, allowing simultaneous transport and precise weighing of loads, significantly improving work efficiency. Todsricv Njpfx Ac Tsb Main advantages of the electric pallet truck with electronic scale Load capacity of 2000 kg – the pallet truck enables the transport of heavy loads, making it an ideal solution for handling large goods in warehouses and distribution centers. Built-in electronic scale – allows simultaneous movement and weighing of loads, eliminating the need for additional stationary scales and streamlining logistics operations. Precise speed adjustment – potentiometers allow the operator to adjust driving speed, ensuring smooth and safe maneuvering in narrow warehouse aisles. “Turtle mode” – enables very slow and controlled movement, ideal for precise positioning of loads in confined spaces and providing additional safety in demanding working conditions. Ergonomic design – ensures operator comfort thanks to an intuitive control panel, making the pallet truck easy to operate and maneuver. High reliability – a robust construction and high-quality components guarantee long service life, even under intensive working conditions. Construction and technology The electric pallet truck with an electronic scale is equipped with a 0.75 kW drive motor, providing sufficient power to transport loads weighing up to 2000 kg. Thanks to the use of a 2x12V/40Ah battery, the truck offers extended operating time. An electromagnetic brake ensures safe operation, while the control system with potentiometers enables precise speed adjustment and easy maneuvering. The built-in weighing system with a digital display allows the operator to monitor the weight of transported goods at any time. Precision and work efficiency The pallet truck provides accurate weighing of transported loads through its integrated electronic scale. The operator can instantly check the weight of goods, improving logistics processes and enabling continuous load monitoring. The adjustable travel speed and “turtle mode” increase safety and allow precise positioning of the truck in narrow and demanding working areas. This makes the device an excellent solution for warehouses, production facilities, and distribution centers where efficiency and accuracy are essential. Standard equipment Built-in electronic scale with display Battery: 2x12V/40Ah Drive motor: 0.75 kW “Turtle mode” for precise maneuvering Ergonomic control handle Charger included Technical specifications Parameter Value Load capacity 2000 kg Turning radius 1300 mm Fork height when raised 200 mm Fork height when lowered 90 mm Fork length 1150 mm Fork width 550 mm Battery voltage / rated capacity 2x12V/40Ah Drive motor power 0.75 kW Lifting motor power 0.8 kW Brake Electromagnetic Travel speed with/without load 4.5 km/h Maximum gradient with/without load 3/5% Length / width / height 1620 x 570 x 1225 mm Weight 173 kg

Condition: new, Year of construction: 2026, TA3510 Scissor Lift Pallet Truck The TA3510 scissor lift pallet truck is a professional device designed for the safe and efficient transport of heavy loads in various industries. Thanks to its robust construction, innovative hydraulic solutions, and a range of safety features, the TA3510 is one of the most reliable and versatile scissor pallet trucks available on the market. It is perfectly suited for warehouse logistics, manufacturing, battery transport, and many other applications where durability and precise lifting are required. Main Advantages of the TA3510 Scissor Lift Pallet Truck High load capacity – a lifting capacity of 350 kg enables comfortable transport of heavy loads. Safety features – the truck is equipped with an overload protection valve preventing excessive loading, as well as wheel locking mechanisms ensuring stability during operation. Easy operation – the intuitive design and hydraulic foot pump system make lifting and lowering loads simple and convenient. Robust construction – manufactured from high-quality materials, the truck offers excellent resistance to mechanical damage and long-term reliability. Flexibility and manoeuvrability – swivel wheels allow easy movement and precise manoeuvring in tight working spaces. Construction and Technology of the TA3510 Scissor Lift Pallet Truck The TA3510 scissor lift pallet truck is a highly durable product designed for intensive operation in demanding working conditions. Its reinforced construction, made from high-quality materials, ensures long-lasting strength and reliability. The hydraulic system has been designed to provide smooth lifting and lowering of the platform, while the sealed pump housing protects against contamination and oil leakage, increasing the overall durability of the device. The TA3510 is equipped with a special overload protection valve that prevents excessive loading of the truck. This solution not only improves safety but also helps reduce operating costs. The ergonomic handle and polyolefin swivel wheels provide comfortable operation and excellent manoeuvrability, which is particularly important when working in confined and difficult-to-access areas. Tedpfx Ajric Emec Tob Precision and Work Efficiency of the TA3510 Truck The TA3510 scissor lift pallet truck ensures high efficiency and precise load lifting thanks to its advanced hydraulic system. With a lifting range of up to 1300 mm and a minimum platform height of 340 mm, the device is ideal for transporting pallets and other heavy loads in warehouses, production facilities, and areas with limited working space. This high level of performance improves the efficiency of warehouse and production processes, significantly reducing task completion times and increasing operator comfort. Standard Equipment Reinforced polyolefin wheels providing stability and long service life Ergonomic handle for easier manoeuvring Sealed hydraulic foot pump ensuring convenient operation Platform lowering speed adjustment for improved control during lifting and lowering operations Wheel locking mechanism ensuring safety and stability during operation Technical Specifications – TA3510 Parameter Specification Maximum load capacity 350 kg Maximum platform height 1300 mm Handle height 975 mm Working platform dimensions 500 × 910 mm Minimum platform height 340 mm Weight 85 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK 2T gantry crane is a robust and reliable industrial machine designed for intensive operation in production halls, workshops, warehouses, and other industrial facilities. With a load capacity of up to 2000 kg, a durable construction, and a mobile frame equipped with swivel castors, it enables safe and precise lifting and transport of heavy structural elements, machinery, and materials. Main Features and Advantages 2-ton load capacity – ideal for lifting heavy loads in industrial applications. Adjustable working height from 2400 to 3600 mm – allows adaptation to different types of facilities and projects. Double T-type supporting beam (100 x 180 mm) – increased stability and the possibility of installing chain or wire rope hoists. Mobility – four swivel castors with parking brakes ensure easy movement and secure positioning at the workplace. High torsional resistance – reinforced steel construction with additional supports ensures rigidity under load. Safe height adjustment – carried out using a lever and two locking screws on each support. Professional Industrial Construction The CORMAK 2T model was designed with efficiency, durability, and safety in mind. The construction based on a double T-type load beam allows the installation of various lifting accessories, including chain hoists and electric winches. Durable travelling wheels ensure quiet and smooth operation even under maximum load, while parking brakes guarantee stability during loading, assembly, and maintenance operations. The gantry crane can be quickly moved along the designated working area or relocated to another part of the facility. Thanks to its high mobility and structural rigidity, it is suitable for many industries, including heavy industry, construction, repair workshops, and logistics centres. Versatility and Upgrade Options The crane can be equipped with additional accessories such as pulley blocks, chain hoists, or wire rope hoists, allowing more precise and controlled handling of loads. It is ideal for tasks such as: Loading and unloading machinery and industrial components Assembly of steel and structural elements Moving heavy parts in repair workshops Service, maintenance, and assembly work in construction applications Tsdpfx Acoridh No Tob Standard Equipment Steel frame with adjustable height Double T-type supporting beam: 100 x 180 mm 4 swivel travelling castors with brakes Robust supports with safety locking system Reinforced torsion-resistant construction A Professional Solution for Your Facility The CORMAK 2T gantry crane guarantees reliability and safety when working with heavy loads. It is an investment that improves efficiency and precision in applications where standard lifting solutions are insufficient. The possibility of adding lifting accessories allows the machine to be easily adapted to specific production, maintenance, or assembly requirements. Note: The gantry crane is sold without a hoist – photos are for illustration purposes only. Technical Specifications Parameter Value Load capacity 2000 kg Double T-type supporting beam 100 x 180 mm Height adjustment range 2400–3600 mm Overall width 2360 mm Weight 168 kg

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Tjdpfsmrp Tlox Ac Tsb Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 230V Tedomtwktspfx Ac Tsb Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood Todpjvugf Rofx Ac Tsb The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Tjdpfevuggbox Ac Teb Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK Tjdpjvugrdofx Ac Teb The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: new, Year of construction: 2026, CORMAK BDS 6x9 Wood Sander – Versatile Belt and Disc Sander for Precision Woodworking The CORMAK BDS 6x9 wood sander is a versatile workshop machine combining the functions of a belt sander and a disc sander. Designed for precise processing of wooden and wood-based components, it is ideal for craft workshops, model-making studios, and service facilities. Thanks to its compact design and robust components, the machine provides high accuracy and flexibility for a wide range of sanding applications. Main Advantages of the Machine Combined belt and disc sander – vertical and horizontal belt operation increases the machine’s versatility. Precise angle sanding – achieved with the adjustable work table and linear angle gauge. Compact dimensions – space-saving design, ideal for smaller workshops. Stable construction – grey cast iron base minimizes vibrations and improves working accuracy. Effective dust extraction – a 60 mm dust outlet allows connection to an extraction system. Design and Technology The sander is equipped with a durable grey cast iron base, providing high rigidity and resistance to deformation. The 310 × 190 mm work table ensures stable material support, while its adjustment range of 0°–45° enables accurate bevel sanding. The graphite belt support provides smooth and consistent belt movement, resulting in excellent surface finishing quality. Precision and Work Efficiency The CORMAK BDS 6x9 delivers high sanding precision thanks to the high operating speeds of the sanding disc (23 m/s) and sanding belt (5.5 m/s). This allows efficient material removal and surface preparation before further processing or painting. The motor with a power rating of 550 W (S1) / 750 W (S6) provides optimal performance while maintaining low noise levels and efficient energy consumption. Applications The BDS 6x9 model is suitable for: woodworking and craft workshops, restoration and conservation studios, model-making and handicraft applications, technical schools and training centers, repair and maintenance workshops. Standard Equipment Belt and disc sander with 230 V motor Adjustable-angle work table Linear angle gauge Graphite belt support Ø60 mm dust extraction outlet Polish-language operating manual (DTR) Optional Equipment Dust extraction system Replacement sanding belts and discs Mobile stand Technical Specifications Parameter Value Sanding belt size 1220 × 150 mm Tedpovugrksfx Ac Tsb Sanding disc diameter 225 mm Work table size 310 × 190 mm Maximum sanding length 590 mm Dust extraction outlet diameter 60 mm Angle sanding range 0°–45° Belt speed 5.5 m/s Disc speed 23 m/s Motor power S1 S1: 550 W / S6: 750 W Power supply 230 V Weight 54 kg Warranty 12 months Manual (DTR) Included