Used Celaschi Tsa 280 for sale (2,646)

Condition: new, axle configuration: 4x2, fuel: diesel, DESCRIPTION ON REQUEST Iedpfx Aezavptoa Ieic

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: Iedpfx Aajxfwds Ioic - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2016, Engel e-Motion 740/280 T WP with TecnoMatic robot / Electric machine / Operating hours: approx. 9000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1900 bar Dosing volume: 393 ccm Clamping unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Size of mounting plates: 1100x1100 mm Ejector: electric Clamping unit: toggle Control system: CC 300 - Touchscreen Iijdpfx Aezc N Disa Ijc Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 9000 in automatic operation Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 4 Control system with hot runner nozzles x 64 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment TecnoMatic Medium robot Year of manufacture: 2020 6-axis robot: 6 axes are driven by servo motors (electric): X, Y-telescopic, Z, A, B, C Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional fee Dimensions: Weight: 17200 kg Length/Width/Height: 7.37x2.10x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2000, cutting diameter 250 mm dimensions of saw-blade 450 x 45 x 2,0 mm cutting width 280 x 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 170 x 200 mm Iisdpfx Aaey Nnv Ss Ijc cutting speed 16- 32 m/min power requirement 1,3 kW dimensions 1,3 x 0,55 x 1,0 m weight 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade

Condition: good (used), Centre height: 125 mm Iiedpfx Aeyu R H Nea Ioc Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: used, mileage: 641,000 km, power: 206 kW (280.08 HP), first registration: 06/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, electric window regulation, power mirror, = Additional options and accessories = - Radio - Sper = Remarks = Volvo FL280, 2014, 641,000 km Euro 6, Isdey Ryd Ropfx Aa Ijic 17,500 kg total weight, DHollandia tail lift = More information = Front axle: Steering Rear axle: Double wheels GVW: 17.500 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), mileage: 356,163 km, power: 210 kW (285.52 HP), first registration: 05/2017, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,470 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, power mirror, spoiler, tail-lift, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Remote central locking - Speed limiter - Air suspension - Air horn - Radio/CD player - Spare wheel - Reversing camera - Side door - Sun visor flap - Toolbox = Remarks = Ijdpjw Nxytsfx Aa Ioic Fully closing tail lift Reversing camera Fully air-suspended Air conditioning Cruise control Navigation system Roll stops Dhollandia DHLV tail lift 3,000 kg Stainless steel apron L300 x W66 x H80 Internal bed dimensions: L767 x W247 x H247 Lashing rail heights: 70 cm – 120 cm – 180 cm = Additional Information = General Information Model year: 2026 Registration: 94-BJN-8 Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Axle Configuration Tire size: 315/80 R22.5 Axle brand: Other Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 8,000 kg; Steering; Tire tread left: 65%; Tire tread right: 65% Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Weights Unladen weight: 10,129 kg Payload: 9,371 kg GVW: 19,500 kg Operational Tail lift: Dhollandia DHLV, rear, 3,000 kg Maintenance, History and Condition APK (Dutch MOT): valid until 08/2026 Technical condition: good Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, mileage: 213,000 km, power: 206 kW (280.08 HP), first registration: 04/1994, fuel type: diesel, overall weight: 18,000 kg, color: gold, gearing type: mechanical, suspension: other, Equipment: air conditioning, parking heater, Top-sleeper, diesel-powered vintage vehicle, manual transmission, pop-out, 8 horse capacity, air conditioning, auxiliary heater, 4-6 sleeping berths, top-sleeper seating area, TV, storage cabinets, sink, refrigerator, separate bathroom, washbasin, shower, rear-view camera, rear and side ramp, ramp limiters, windows in the horse compartment, roof hatch, saddle holder, permissible total weight 18,000 kg. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller at the following number. //*EXCHANGE, TRADE-IN, OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING, ARE POSSIBLE! All information is provided without guarantee.* You can find more offers on our website: The description and data provided do not constitute a guarantee and are not binding. The purchase contract, which is concluded at the car dealership upon purchase of the vehicle, is binding. Errors and prior sale are subject to change! Iiedezad Svspfx Aa Ijc

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Iisdpfx Aasy Nybgs Ijc Tool magazine positions: 400 Interface: HSK 100

Condition: used, mileage: 225,215 km, power: 206 kW (280.08 HP), first registration: 03/2020, fuel type: diesel, tire size: 305/70r22.5, axle configuration: 4x2, wheelbase: 6,400 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 11,300 mm, total width: 2,600 mm, total height: 3,900 mm, Year of construction: 2020, Equipment: central locking, cruise control, electric window regulation, power mirror, soot filter, tail-lift, = Additional options and accessories = - CD player - Aluminium fuel tank - Particulate filter - Reversing camera - Alternating current - Toolbox = Further information = Tyre size: 305/70r22.5 Brakes: Disc brakes Iiedpfxjy Ik Hwe Aa Ijc Front axle: Steered; Tyre tread left: 4 mm; Tyre tread right: 3 mm; Suspension: Leaf suspension Rear axle: Twin tyres; Tyre tread left inner: 8 mm; Tyre tread left outer: 4 mm; Tyre tread right inner: 4 mm; Tyre tread right outer: 8 mm; Suspension: Air suspension Unladen weight: 10,600 kg Payload: 6,850 kg Gross vehicle weight: 17,450 kg Damages: none

Condition: used, Year of construction: 2011, System with 6 washing brushes, inlet section to the washing machine, outlet section, control panel, fan cabinet. Max. Washing width: approx. 2800 mm. Length of inlet section: approx. 2500 mm. Iiedpfx Aewpwhkoa Iec Length of outlet section: approx. 1400 mm. Total length: approx. 7200 mm. Max. Width: approx. 4200 mm. Max. Height to top edge of fan cabinet: approx. 3320 mm. Condition: very good, second-hand.

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1995, complying with CE standards FANUC 0-T CNC control Flat guides Iiodey S R Ayopfx Aa Ioc ASA 6" Bar capacity: 62mm Maximum turning diameter over bed: 600mm Maximum turning diameter: 250mm Maximum turning length: 630mm Maximum spindle power: 15Kw Weight: approximately 5,000 Kg. Complete with: Hydraulic chuck Tailstock 12-position automatic tool turret Chip conveyor

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Iodpfx Ajydbfhoa Ieic Required space: 500 x 600 mm

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-Class from second ownership, which has never been used for civilian purposes. TÜV and H-certification (according to §23 StVZO) passed in September 2025. Roadworthiness inspection (HU) valid until 09/2027 ("no defects found", approved by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage only 29,800 km. Used exclusively for fire service duty to date. Rapid Intervention Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA capacity. German garage-kept vehicle, equipped with the original registration document (only 2 previous owners), continuously registered until autumn 2025. Manufacturer stated in the original papers as GFG "Geländefahrzeug-Gesellschaft", then a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles produced under this manufacturer designation; shortly afterwards, "Daimler-Benz" was listed as the vehicle manufacturer in the registration papers. In 1991, a complete MATTER roll cage was installed in the vehicle (properly recorded in the documents). Includes a small roof rack system for transporting long equipment items. The long 280 GE is the largest and most powerful model of the first G-Class series that could be ordered ex-factory as a Mercedes G-Class in the early years. The M110 inline six-cylinder petrol engine with 2,717 cc and 115 kW / 156 hp starts and runs well. 4-speed manual transmission with differential locks. Power steering. Maximum speed registered at 155 km/h. A power take-off is installed for operating the generator. The last primary use was transporting a portable pump (TS) along with suction hoses and accessories. Therefore, there are no rear seats and a cargo area similar to a truck. Unfortunately, no additional seats remain apart from the 2 front seats. According to the original documents, this is a "3-seater" and the vehicle registration type is listed as "Other special-purpose vehicle, fire service rapid intervention vehicle (VRW)." Unladen weight is specified as 2,360 kg. Permissible total weight (originally 2,900 kg) was increased in 1991 to 3,030 kg as per the records. Therefore, this 280 GE currently has a payload capacity of 670 kg. Overall vehicle dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tires: 205/80R16, in good condition. Fitted with winter tires bearing the snowflake symbol in accordance with current legal requirements (DOT 2018). Iijdpexthdzsfx Aa Ijc The G does not have a tow hitch, but it is equipped with the necessary mounting bracket. Retrofitting/towing capacity information cannot be supplied, as the relevant fields for towing capacity in the original registration document are marked as "not applicable." According to oral information from the last owner, the Mercedes is accident-free; however, this cannot be documented in writing and is therefore passed on to the buyer as an oral statement only. The 280 GE was driven a considerable distance on the motorway to us and completed the journey without any issues. A new battery has just been installed. The off-road vehicle is immediately available and ready for new tasks. This offer is only valid for commercial customers, freelancers, public authorities, emergency services, agriculture, forestry, and similar self-employed professionals. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors excepted.

Condition: used, mileage: 275,000 km, power: 206 kW (280.08 HP), first registration: 02/2001, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2001, Equipment: ABS, all wheel drive, crane, electronic stability program (ESP), * MAN LE 280 tipper crane * EZ: 02-2001 * 4x4 all-wheel drive * Palfinger PK 14600 + radio remote control * 4 x drop-down hooks * Winch * BLATT / BLATT * 2 x trailer hitches Iisdpfxeyq A Tyj Aa Isc * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, mileage: 88,400 km, power: 77 kW (104.69 HP), first registration: 12/2021, fuel type: diesel, overall weight: 2,800 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,550 mm, loading space height: 1,300 mm, Year of construction: 2021, - Used Truck: Ford Custom 280 Van L1 H1 Trend. - Registration: December 2021, Engine: 2.0 TDCI 105 HP Euro 6d, 6-speed manual gearbox, Mileage: 88,400 km. - Van / 3-seat L1 H1, Load compartment dimensions: 2,550 x h. 1,300 mm, Bulkhead with opening for transporting long items, Floor and full-height side wall lining. - Trend trim level, equipped with: Air conditioning, Radio with Bluetooth and USB, Fog lights, LED daytime running lights, Front and rear parking sensors, Cruise control, Central locking, Smartphone mount, On-board computer, Two keys, Spare wheel. - Bodywork and interior in excellent condition, Mechanics with 12-month dealer warranty. Recent maintenance: Timing belt kit & water pump replaced, Full service performed. - MOT valid until 2028, One owner. Iiedpfx Aaezbbp Ij Isc CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00; Saturday: 8:30 / 12:00 - 14:00 / 17:00. - Certified mileage. - Test drive available by appointment. - On-site ownership transfer. - Custom financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inconsistencies in this advertisement, which does not constitute any contractual commitment. All prices shown are VAT and registration/ownership transfer fees excluded.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm Iedocuntzepfx Aa Isic cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control system Brand: GDW Model: C 280 Z conturline with quick-change tool holder size B Condition: New machine Built to the highest safety standards Standard equipment includes: - LED tube light - Electromechanical holding brake for the main spindle, programmable or operable via push button on the control panel - Coolant system - Quick-change tool holder size B, including one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 50 / MT 3 - Protection flange for spindle head DIN 55027-5 - 2 fixed center points MT 3 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in paper and CD format Ijdpfx Aasxy Ryfo Ijic

Condition: new, Precision master lathe and traction spindle lathe Make: GDW Model: LZ 280 VS comfortline Condition: new machine with infinitely variable speed control and infinitely variable feed control to the highest safety standard tip height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: The basic price already includes the latest display generation "comfortline", which contains many innovations and simplicity: - 9'' TFT colour screen - Technology memory for 99 tools - Oriented spindle stop via teach-in button - Input of constant speed or constant cutting speed (V = c) - Speed limitation selectable - Error and status display in plain text - Feed rate and thread pitch input by means of image-supported masks - Thread cutting therefore does not require any Change wheels more exchanged or even be purchased in addition to all the usual Ijdpjcunqgefx Aa Isic to be able to cut threads! is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Leadscrew disconnection with key - Braking device for main drive - Feed protection hood movable with limit switch monitoring - Spaeneschutz rear wall removable - Spray guard cover movable - Spa tub can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle

Condition: new, Precision master lathe and draw spindle lathe Make: GDW Model: LZ 280 VS-G basicline Condition: new machine with infinitely variable feed control to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: GDW control panel with feed potentiometer - Display of the travel direction Iedpjfbmlisfx Aa Ioic - Display of spindle speeds - Teach-in for traverse path during thread cutting - Input of feed and thread pitches - Thread pitches Metric, inch, module, DP GDW 3-axis positioning display - 6" TFT colour display - Radius / diameter display - Tool memory for 100 tools - Changeover mm / inch - Axle coupling Z / Zo - cone calculation - pocket calculators - Graphical input help - USB port - Automatic standby mode is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Lead screw disconnection with key - Braking device for main drive - chuck guard movable with limit switch monitoring - Removable chip guard rear panel - Spray guard cover movable - chip tray can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle head DIN 55027-5 - 2 fixed centering points DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil press - 5 Spare shear pins - 2 Operating instructions

Condition: used, Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Ijdpsu Rii Ujfx Aa Ioic Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data Iiedpfeu Rii Isx Aa Isc 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2025, total length: 11,350 mm, - Arbeitshöhe 27.73 m - Plattformhöhe 25.73 m - Max. Reichweite 21.45 m - Vertikaler Drehbarer Korbarm (oben / unten) +56.80 ° / -62 ° - Tragfähigkeit des Arbeitskorbs / maximale Korblast 240 kg / 350 kg - Drehung des Oberwagens 360 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Zulässige Personenanzahl (innen / außen) 3 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 1.43 m - Gegengewicht Aufmaß / Reichweite 1.45 m - äußerer Wenderadius 4.35 m - Fahrgeschwindigkeit - Transportmodus 4.50 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h - Steigfähigkeit 35 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Vollgummireifen aufvulkanisiert - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 Iijdpey Nfldjfx Aa Iec - Gebremste Räder / Räder 2 / 2 - Hersteller / Motormodell Yanmar - 4TNV88C - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 46 Hp / 34.30 kW - Bodendruck 21.30 dan/cm2 - Hydraulikfördermenge – Hydraulikdruck 400 bar - Fassungsvermögen des Hydrauliktanks 94 l - Fassungsvermögen des Kraftstofftanks 76 l - Umgebungsgeräusch (LwA) < 106 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s²

Condition: used, Year of construction: 1996, cutting diameter 280 mm Iijdjy N D H Topfx Aa Ijc capacity 90 degrees: flat 280 x 160 mm capacity 90 degrees: square 240 x 240 mm band length 425 x 40 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 150 x 250 mm capacity 45 degrees: square 170 x 170 mm total power requirement 1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 1,4 x 0,8 x 1,0 m

Condition: like new (used), Year of construction: 2024, functionality: fully functional, number of ink cartridges: 4, color channels: 4, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (min.): 98 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 660 mm, number of feeding trays: 5, total length: 790 mm, total width: 1,600 mm, total height: 1,200 mm, space requirement width: 2,000 mm, space requirement height: 1,200 mm, counter reading (black): 83,789, counter reading (color): 117,056, year of last overhaul: 2025, type of input current: three-phase, Equipment: auto duplex, Professional digital printing machine in excellent condition, with very little use. Iisdey Altnepfx Aa Ijc Total counter approximately: ~200,000 prints (well below the market average) A4 mono: 47,967 | A4 color: 48,898 | A3 mono: 35,822 | A3 color: 68,158 External Fiery EX-280 server (high-performance professional RIP and advanced color management) Excellent print quality, ideal for digital production. The machine is currently not in operation but is in perfect working order. Ideal for print shops, copy centers, or production facilities looking for a virtually new machine at a highly competitive price. Inspection possible. For sale due to shop closure and lack of use.