Used Blomenroehr Tipper Trailer for sale (16,649)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake Dodpfszd Eynsx Amnsci 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis * High-tensile fine-grain steel welded lightweight construction Djdpfxoi Rix Ij Amnjci * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design * Parking in loaded condition not permitted; when unhooked, the vehicle must be positioned with a rearward tilt * Foldable underrun protection * Integrated mudguard mounting system with stone-repellent surface * Asphalt specification spray flaps behind last axle, hinged to mudguards with upper locking option; shortened mudguards ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Off-road axle specification * Air suspension system * 1st axle as automatic lifting axle with forced lowering and traction aid * Galvanised lifting axle mechanism ## Braking System * Dual-line compressed air braking system with colour-coded piping for simplified maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting lines) * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * Raise-and-lower valve integrated * Vehicle stability control system ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side marker lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin front sockets ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) ## Tipping Body – Stone Master Thermo Body * Round steel body in “Stone Master Design” made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Front wall access ladder included * “Membrane” tailgate design: externally mounted pendulum rear door with double hook locking system * Two clamping screws with lever fasteners on lower side * Side walls: 4 mm continuous steel * Floor: 4–5 mm steel, wear- and weight-optimised construction * Fully insulated Fliegl Asphalt Profi Thermo body * Insulation on front, sides, bottom and rear (Fliegl Isotherm system) * BASIC cover system with tarpaulin enclosure * Standing platform with access steps * Connection panel for air, electrics and braking system with large free working space for optimal handling * Sliding tarpaulin system, one-sided storage on RHS (right-hand side), with central locking on LHS (left-hand side) ## Registration & Compliance * Germany * EC type approval according to 2007/46/EC * Body strength certification according to EN 12642 * 24/7 service hotline * Manufacturer certification for thermal vehicles according to RS 10 – 2013 * Prepared for single-line licence plate holder * Warning plate according to ECE R70 ## Optional Thermo Insulation Packages * BASICplus: sheet metal cladding * PREMIUM: stainless steel cladding

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Dcjdpfx Aozd D Scsmnji Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Operating Instructions The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: used, maximum load weight: 13,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2006, next inspection (TÜV): 10/2026, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Year of construction: 2006, Equipment: ABS, Meiller MZDA 18/21 Tipper Trailer VIN: M08395 Vehicle Data * First registration: 10/26/2006 * Year of manufacture: 2006 * Color: Beige * Axles: 2 x BPW EcoPlus * Suspension: Air * Parking brake: Drum brake Dcsdezby I Aspfx Amnoi Chassis / Components * BPW EcoPlus axles * Air suspension * Drum brakes * JOST support at the front * Duomatic * ABS electrical connection * 15-pin electrical connection Body * Meiller Tipper Trailer * Type: MZDA 18/21 * Internal dimensions: 4.80 x 2.30 x 1.00 m * Volume: approx. 11.0 m³ Weights * Permissible total weight: 18,000 kg * Unladen weight: 4,840 kg * Payload: 13,160 kg Tires * 385/65 R22.5 * Axle 1: 50 % / 50 % * Axle 2: 50 % / 50 % Other * German vehicle * TÜV (Technical Inspection): 10/2026 * SP: New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sales, and mistakes. We reserve the right to make these. Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / export license plates We will gladly help you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: new, empty load weight: 6,900 kg, maximum load weight: 14,100 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,250 mm, loading space width: 2,300 mm, loading space height: 1,220 mm, loading space volume: 15 m³, total length: 2,550 mm, total width: 2,870 mm, total height: 7,580 mm, suspension: air, tire size: 600/55 R26.5, front tire size: 600/55 R26.5, rear tire size: 600/55 R26.5, construction height: 2,880 mm, Equipment: compressed air brake, truck registration, | FARMTECH GRAVIS 2000 Heavy-Duty Tipper Trailer | FAD axles with oscillating axle assembly and drum brakes (ADR brake axles) | HARDOX® steel floor and sides: 8 mm / 6 mm | Loading dimensions/deck: 5250 x 2300 mm | K80 ball coupling | Swing brake for hydraulic tailgate, adjustable tipping angle | Tires: 600/55 R26.5 | New vehicle. Sale to commercial customers only. Subject to errors and prior sale. | Oscillating axle assembly for vehicles designed for extreme operating conditions in particularly challenging terrain! | ADR brake axles are specially designed for overrun brake systems, offering a cost-effective and environmentally friendly solution. They are suitable for trailers with a permissible total weight of up to 8,000 kg and can be combined with various braking systems. Dedoygw Dfepfx Amnoci

Condition: new, empty load weight: 4,680 kg, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,750 mm, loading space width: 2,350 mm, loading space height: 600 mm, suspension: steel, tire size: 245/70 R17,5, Möslein Tandem Tipper Low Loader DTD 18 Schwebheim | 3-way tipper with slide-in ramps | Payload: 13,320 kg | Height-adjustable drawbar | ABS | Loading area length: 5.75 m, width: 2.35 m, side wall height: 0.60 m | Folding rear support legs | Tyres: 435/50 R19.5, BPW axles | Subject to errors, misprints, and prior sale. Djdexztrmspfx Amneci

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Dcjdpfx Aeu R D Sdomnoi

Condition: used, first registration: 10/2017, next inspection (TÜV): 08/2025, total length: 7,000 mm, total width: 25,500 mm, total height: 22,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 14mm, wheelbase: 1,300 mm, front tire size: 385 / 65 R 22.5 / 14mm, operation weight: 19,000 kg,

Condition: new, empty load weight: 1,075 kg, maximum load weight: 2,425 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,620 mm, loading space width: 1,845 mm, loading space height: 400 mm, total length: 5,143 mm, total width: 2,003 mm, total height: 1,251 mm, Year of construction: 2026, Three-way tipper - HTK 3500.37 with Furmann-BW (reinforced, very robust steel sideboards), electric and manual pump, timber rack pre-assembled, 8 tie-down rings. Our price - €8,700 including 19% VAT, including 6.4% delivery surcharge and vehicle documents! Description: The Humbaur HTK with Fuhrmann® profile is characterized by its robust sideboard made of galvanized steel sheet. This creates an extremely resistant surface. In addition, the HTK impresses with its quality and a manual pump, which you can replace with an electric hydraulic pump if required. This allows you to operate your HTK easily and independently in any situation. Technical data: Trailer type - Two-axle Design - Furmann-BW - robust steel sideboards, hot-dip galvanized Rear tipper - 45° Three-way tipper - 45° Weight - 1,075 kg Total weight - 3,500 kg Payload - 2,425 kg Internal length - 3,620 mm Overall length - 5,143 mm Internal width - 1,845 mm Overall width - 2,003 mm Internal height - 400 mm Overall height - 1,251 mm Loading height - 760 mm Tires - 13 inches Equipment: Profile sideboards made of galvanized steel sheet, completely removable V-drawbar, hot-dip galvanized Tilting bridge made of steel, manufactured in one piece Chassis, tilting bridge and sideboards hot-dip galvanized Manual pump, optional electric hydraulic pump from 3,000 kg permissible total weight, electric and manual pump Humbaur multi-function lighting 13-pin plug and reversing light Rear flap can be pivoted Dcsdjzdcn Depfx Amnoi Tie-down rings mounted in the bridge floor, tensile force 800 kg per tie-down ring Timber rack as preparation for aluminum timbers for easy retrofitting Support wheel

Condition: used, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, first registration: 04/2001, total width: 25,500 mm, tire size: 385/55 R22.5 , 6mm, front tire size: 385/55 R22.5 , 6mm, operation weight: 18,000 kg,

Condition: used, empty load weight: 4,700 kg, maximum load weight: 13,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 04/2027, suspension: other, color: blue, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, * Loading platform dimensions * L = 5.00 m / W = 2.46 m * Side wall height = 0.90 m * BWP axles Dedpfsyuqw Isx Amnoci * Sliding tarpaulin ... Air suspended, incl. VAT.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 900 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 2,350 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. *Chassis – Tandem Three-Way Tipping Trailer Welded steel chassis construction Continuous rear tipping shaft with 100 mm spherical tipping bearing Two-speed landing gear at the front Foldable rear support legs Wheel chocks with holder Steel underrun protection Quarter mudguards in front of and behind each axle Anti-spray mud flaps behind each axle Lockable storage compartment for aluminium loading ramps beneath the platform 1 pair of aluminium loading ramps, approx. 3,600 mm long and 400 mm wide, load capacity 8,000 kg per pair Plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with padlock *Drawbar Drawbar with certified towing eye *Axles & Suspension BPW drum brake axles Air suspension with raise-and-lower valve *Wheels & Tyres 385/55 R 22.5 tyres, manufacturer's choice Steel rims, factory silver finish *Braking System Dual-line compressed air braking system Spring-loaded parking brake Djdpjzcyl Rjfx Amnjci Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable *Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable front plugs with connecting cable *Hydraulic System Three-way tipping mechanism Hydraulic multi-stage tipping cylinder with stroke limiter and safety cable Hydraulic connection with SVK coupling NW 10/3, including connecting hose Hydraulic operation via truck PTO (power take-off) *Tipping Body 4 mm HB 400 steel floor Rear spherical tipping bearing, 100 mm diameter Steel side walls, drop-down and pendulum-mounted, with central locking at the bottom Front wall and side walls approx. 800 mm high Steel rear wall approx. 600 mm high, designed as a combination pendulum tailgate Side wall return springs 4 pairs of external lashing rings in the floor, each rated at 3 t 2 pairs of recessed floor lashing rings, each rated at 5 t *Registration & Compliance Registration country: Germany DEKRA inspection and certification included 24/7 service hotline Prepared for single-line licence plate holder Reflective contour markings according to ECE R048 (white on the sides, red at the rear) Rear warning plate according to ECE 70 *Paint Finish Chassis: galvanised or painted according to customer requirements Body and side walls: painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, functionality: fully functional, color: grey, Year of construction: 1997, Equipment: tail-lift, PAGANINI 750 PG2 TRAILER 2 Axles - Year 1997 Wheelbase: 5,200 mm Accessories: - Air suspension - Hydraulically operated side opening Equipment: Dedpfx Amszggyhjnoci - DUMP BODY, SIDE-TIPPING, 7540x2550 mm - Side height: 1000+700 mm, platform height: 1400 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear Dcjdpfezcv Stjx Amnji 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: used, first registration: 03/2019, Equipment: ABS, IVECO Eurocargo 140E250 4x2 three-way tipper with HIAB crane and grapple + tandem trailer. Complete combination, immediately ready for use. Ideal for construction, gardening & landscaping, municipal services, or material transport. Both can also be purchased separately! Price on request. Vehicle data: Iveco Eurocargo 140E22 * Registered: 03/2019 * 220 hp * 6-cylinder engine * Euro 6 * 4x2 * Manual transmission * Leaf spring suspension * Trailer coupling Body: Three-way tipper * HIAB 088 E-3 HIDUO loading crane * Crane located behind the cab * Hydraulic outriggers * Sideboards * Grapple Dcsdpsy U Sdksfx Amnji Trailer: Möslein tandem trailer * Three-way tipper * Including ramps at the rear Equipment: Comfort seat * Radio * Sun visor * Tool box * Rotating beacon Condition: Vehicle and trailer in good condition * Crane functions perfectly * Immediately ready for use We are happy to provide further information.

Condition: used, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2010, loading space length: 5,100 mm, Ref. No.: B - 07 On behalf of customer Schmitz Gotha Djdpfxexvgame Amnjci * SKI 18 * Three-way tipper * 2-axle * SAF axles * Perm. total weight 18,000 kg * Good condition Trade-in possible Financing from 3.99% Subject to errors and prior sale! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typing or data transmission errors. Listed equipment must be checked separately. All information in the ads is non-binding! Delivery throughout Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!!!

Condition: used, maximum load weight: 7,500 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2012, next inspection (TÜV): 04/2026, loading space length: 5,035 mm, loading space width: 2,424 mm, loading space height: 400 mm, Equipment: ABS, Leaf suspension, steel rims, air brake, drum brake, metal floor, used vehicle Vehicle no. 3296, Münz Otto TDAK 10 three-way tipper with lowering function, ABS, tyres: 235/75 R17.5, leaf suspension, drum brakes, 10 retractable lashing eyes on the loading platform, 2 retractable lashing eyes on the front wall, metal loading floor, front support leg, galvanised, rear body can be lowered for loading construction machinery, continuous loading ramp at the rear, height-adjustable drawbar, platform dimensions LxWxH: 5,035 x 2,424 x 400 mm, loading height approx.: 850 mm, unladen weight: 3,500 kg, maximum weight: 11,000 kg. Subject to errors and prior sale. Dcodpjy I H Rlsfx Amnji

Condition: used, empty load weight: 5,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Colour RAL 6016 turquoise green Disc brakes EBS Payload 33,500 kg Air lift suspension Floor 6 mm + wall 6 mm Dcjdpfx Amexz Efxensi with steel reinforcement BPW axles Alcoa aluminium rims Lifting and lowering device Electric Schwarzmüller sliding roof Foldable underrun protection 1st and 2nd axle liftable Errors excepted

Condition: used, maximum load weight: 10,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 900 mm, Year of construction: 2015, Equipment: ABS, Well-maintained tandem three-way tipper trailer Langendoef TK 18 / 13 with steel body Equipment: Dedpfeyxcrgex Amnsci Aluminum rims Front access ladder Platform for operating the sliding tarpaulin Sliding tarpaulin Foldable underrun guard Height-adjustable drawbar Front support winch Spring assistance for opening the left sideboard Recessed lashing rings in the floor For any questions regarding equipment, please call. Tyre condition approximately 70% Errors and prior sale excepted!

Condition: used, maximum load weight: 13,291 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, Equipment: ABS, * Schmitz tandem tipper with steel side panels type SGF-C2 (ZKI18-4.9) * Alcoa aluminium rims * Rotos SCB running gear system (disc brakes) * 2 LED reversing lights * 24-volt LED lighting system * LED rear fog lamp * A-sign for transport of waste materials * White front position lights * Platform with folding step * Rolling tarpaulin cover * Plastic single wheel mudguards * Registration country: Germany Dodpfxsyrvntj Amnsci * and much more * Subject to change, errors and prior sale

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. ## Fliegl Thermo Semi-Tipper Trailer ### Chassis – Semi-Tipper Light Construction * Lightweight high-strength chassis construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design ### Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid ### Braking System * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * External brake cylinder pressure test connection at EBS module * Raise-and-lower valve integrated * Trailer brake system electronically controlled via truck (no truck-side installation required) * Automatic tipping lowering function with shut-off valve * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via towing vehicle EBS system (truck preparation required, basic tyre equipment only) * Axle load detection via EBS CAN bus signal for display in the driver’s cabin (truck must be pre-equipped; no additional truck installation required) ### Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims ### Electrical System * LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * LED work lights on both sides * 2 additional integrated LED rear work lights ### Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * Hard-chrome plated first stage piston rod * HDK screw coupling, fixed section, NW 48 mm * Without hose connection * Hydraulic operation via truck PTO (power take-off) ### Tipping Body – Thermo Asphalt Body * Steel round-body design in “Stone Master” specification made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Internal ladder access at front wall * Aerodynamic “Greenline” tapered body design * “Membrane” tailgate with hydraulic rear door, large opening upwards, approx. 2,200 mm clearance height * Side walls: 5 mm continuous steel * Floor: 8 mm continuous steel * Fully insulated body (Fliegl Asphalt Profi Thermo system) * Insulation on front, sides, bottom and rear Dcjdpfx Asyylapemnei ### Cover System * “Flip Top” sliding tarpaulin system * Automatic rear closing as folding bow system * Tarpaulin moves forward to the front * Electrically driven system * 7-pin front power socket (charging plug), no connecting cable included * No truck-side installation required * Operation via trailer control panel and remote control ### Operating Notes * For transporting salt, lime, and similar aggressive materials, a hydraulic cylinder with hard-chrome plated piston rod is recommended to prevent corrosion and wear * The stated total weight is technically possible; depending on payload distribution, the maximum permissible axle, drawbar, and fifth wheel loads may limit achievable payload * Incorrect load distribution may negatively affect driving stability and trailer tracking behaviour ### Paint Finish * Chassis: DB 7350 Nova Grey * 10-year anti-corrosion warranty against perforation rust * Landing gear: black coated * Tipping body: RAL 1007 daffodil yellow * Sliding tarpaulin: RAL 7038 agate grey

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System Dodpfxowhfiys Amnoci * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: new, Year of construction: 2026, We always have a large selection of tipper trailers! For the construction industry, gardening and landscaping, agriculture, trades, and private customers. Three-way tippers and rear-tipping trailers in various sizes and weight classes. * Single-axle or tandem-axle (2 axles) Dodpjzbwzmofx Amnjci * Permissible total weight from 1500 kg to 3,500 kg * Many vehicles available immediately * Customized designs and special orders according to customer requirements * Financing available upon request If desired, we can build your trailer with customized features: * Manual hydraulic system * Electric hydraulic system * Battery-powered screwdriver hydraulic system * Side panel extensions * Various side panel designs * Leaf grate attachments or sheet metal attachments * Ramps, supports, and other accessories as desired Competent advice, fair prices, and fast availability. Many models are available immediately from stock – other versions can be delivered in the short term. Call us or stop by! Together, we will find the right tipper for your needs. Inspection and consultation are also possible on Saturdays. Please call us in advance so that we can schedule enough time for you.

Condition: good (used), functionality: fully functional, machine/vehicle number: WKY3S0139PM046963, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 10/2026, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65 R 22.5, color: black, Equipment: ABS, our vehicle number: #30623 Kempf SKM 36/3 Aluminium half-round tipper body, 37.1 m³ capacity Floor made of 7 mm thick, annealed aluminium Plastic lining OKULEN, Okuslide Premium tough blue – for cold bulk materials, plate thickness 12.5 mm IPH tipping cylinder Swinging tailgate Mud-tight Grain chute Pneumatic locking Load pressure gauge Roller tarpaulin Platform with ladder BPW Eco Air HD axles Tyres: 385/65 R 22.5 Alcoa Dura-Bright aluminium rims Disc brakes Lifting/lowering Air suspension ABS EBS RSS Haacon drop-down supports Foldable rear underrun protection Djdpfxoxp Hv Ij Amnsci Side underrun protection Toolbox Fire extinguisher box 2x work lights Financing/leasing also available on request!

Condition: good (used), functionality: fully functional, machine/vehicle number: WKY3S0139PM046964, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 10/2026, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65 R 22.5, color: black, Equipment: ABS, our vehicle number: #30622 Kempf SKM 36/3 Aluminium semi-round tipper body, 37.1 m³ Floor made of 7 mm thick annealed aluminium Plastic lining OKULEN, Okuslide Premium tough blue – for cold bulk materials, sheet thickness 12.5 mm IPH tipping cylinder Swing tailgate Sludge-tight Grain chute Pneumatic locking Load pressure gauge Roll tarp Platform with ladder BPW Eco Air HD axles Tyres 385/65 R 22.5 Alcoa Dura-Bright aluminium rims Disc brakes Raise/lower function Air suspension ABS EBS RSS Haacon drop supports Folding rear underrun protection Dedpfoxp Huwox Amnsci Side underrun protection Toolbox Fire extinguisher box 2x work lights Financing/leasing available on request!