Used Beyschlag Und Andere Resistance for sale (7,860)

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Iodpfx Ajzt Sb Dochstk Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic calibrating wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out due to its compact size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid wood flooring. 2 main units: soft sanding rollers, 1350 mm rollers Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuous speed control of the feed belt Continuous speed control of both working units Pneumatic air blowers for the working units Ammeter for monitoring motor load Remote switching off of units from the control panel Stop with 4 positions for compensating belt grit Feed belt is perforated with the option of vacuuming the parts Roller extension of the table at the inlet and outlet Pneumatic oscillation controlled electronically CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding roller – see photo Negotiable price: 28,000 EUR excluding VAT Ijdpfx Aey Idxyochjtk The machine is fully functional and sold as is. In stock in Telnice near Brno - Czech Republic Machine testing, demonstration, and operator training are, of course, available.

Condition: used, Additional title: in various designs Iedpfx Acsw Dy E Uehstk

Condition: used, functionality: fully functional, SCM 900 RT Wide Belt Sander Specification: • Condition - used, after a comprehensive inspection, calibration, and replacement of all seals • Manufacturer - SCM • Model - 900 RT • Working width - 900 mm • Maximum working height - 160 mm • 1 combination sanding unit (hard roller with 200 mm diameter + sanding pad) • Main motor power - 7.5 kW • 2 machine feed speeds • 2 conveyor speeds • Analog thickness indicator for the workpiece • Pneumatic oscillation • Abrasive belt size - 2300 x 900 mm • Weight approx. 1200 kg • Overall dimensions: 185 x 155 x 210 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the sale item • Possibility to switch on and inspect the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organize transport using the MDD fleet, courier companies or external carriers Itsdpfx Asyy Ngyschsk • We offer financing support in the form of leasing or lease-loan

Condition: used, mileage: 705,000 km, power: 169 kW (229.78 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, next inspection (TÜV): 08/2026, color: yellow, Year of construction: 1969, 2 former Swiss Postbuses available as a package. Vehicle 1 Saurer L4C left-hand drive One of the last bonneted vehicles on a Saurer chassis. Bodywork by Ramseier + Jenzer. The vehicle underwent a complete professional restoration at Ramseier + Jenzer in 1991 (factory restoration). The previous owner had the vehicle for 40 years. Immaculately maintained and immediately ready for operation. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic doors at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. Vehicle 2 Volvo chassis with Lauber body 23 passenger seats, automatic transmission, first registered in 1982, converted to a party bus, length 11,750 mm, 230 hp. Special package price: €99,000.00 Iodpfx Aszbp Ulechetk Net export available. We make shipment worldwide.

Condition: used, Year of construction: 2010, 2 x Amada Astro HDS 1030/NTR press brakes, year of manufacture 2010, and Amada Astro III press brake, year of manufacture 2013. Iodpfxoy Em Ulj Achetk

Condition: excellent (used), Year of construction: 2019, Wide-belt sanding machine Manufacturer: Houfek Type: SPB 910 Buldog 5 Year of manufacture: 2019 Ijdpsztrk Sofx Achetk Sanding width: 910 mm Sanding belt: 2,200 x 1,010 mm Workpiece thickness: 3 - 160 mm Sanding motor power: 11 kW Feed rate: 4.5 / 9 m/min Feed motor power: 0.55 / 0.75 kW Sanding belt speed: 18.5 m/sec Weight: 1,210 kg

Year of construction: 2016, condition: used, Year of manufacture: 2016. Ijdpfx Aezuwnxschjtk

Condition: used, Year of construction: 2007, functionality: fully functional, On offer: JET DDS-225 cylindrical grinder – 2 rollers, working width 650 mm The machine is used, has undergone a technical inspection, is in full working order and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Itedpfezq R U Dox Achsk The machine's greatest advantage is its two grinding rollers with a diameter of 150 mm and a length of 690 mm, enabling efficient material grinding in a single pass. Adjustment of the second roller and two feed speed ranges allow the operating parameters to be adapted to the type of workpiece and the desired finishing effect. Specifications: • Manufacturer: JET • Model: DDS-225 • Year of manufacture: February 2007 • Maximum working width: 650 mm • Maximum working height: 200 mm • Number of grinding rollers: 2 • Diameter of grinding rollers: 150 mm • Length of grinding rollers: 690 mm • Second grinding roller with adjustable function • Main motor power: 3.7 kW • Feed motor power: 1.9 kW • Total power: 5.6 kW • Conveyor feed speed: 2 ranges • Manual conveyor height adjustment • Working table length: 970 mm • Working table width: 670 mm • Dust extraction port: Ø120 mm • Weight: 332 kg • Overall dimensions without dust extraction hood: 110 × 114 × 103 cm (L × W × H) • Overall dimensions with dust extraction hood: 110 × 114 × 145 cm (L × W × H) Applications: • Grinding solid wood components • Grinding panels and bonded components • Leveling the surface of the workpiece • Intermediate grinding • Surface preparation for painting, oiling or further processing • Processing components with a width of up to 650 mm and a height of up to 200 mm Additional information: • The photos show the actual condition of the machine on offer • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-Community sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of machine transport MDD wood machinery is a company specializing in the sale and servicing of used woodworking machines. We offer professional advice, technical inspections, repairs and machine preparation for operation. We support customers both before and during the subsequent operation of the device. We regularly update our offer. If you are looking for a machine that we do not currently have in stock, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco and many others. Contact us for more information, to arrange a machine demonstration and to find out the transport cost. MDD wood machinery – sales and service of machines for the wood industry.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 Ijdpfx Acey Hn U Aohstk For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW Itedpfxjwiquke Achsk 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Condition: used, Year of construction: 1998, Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole. Iodpfsxbpq Sjx Achstk Additional title: coolable tank Volume: 21798 l Working pressure: 0 bar Width: 2,95 m Height: 4,2 m Weight: 1500 kg Material: stainless steel Position: vertical Features: flat conical bottom, side wall and cone cooling zone, central outlet DN50, manhole

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. Iodpfszuzpasx Achetk No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Itedpfx Acey H Itfjhok Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Isdpfxszuxwhs Achotk Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: new, Year of construction: 2026, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Piston Filler Filling nozzles and pumps made of stainless steel AISI 316 Bottle infeed via chain conveyor Belt length 2,000 mm, housing made of stainless steel 1 or 2 filling positions possible Performance depends on the type of product, number of pumps, and container size, up to 1,600 bottles/hour with 2 filling positions Up to 900 bottles/hour with a single filling position Volumetric filling of products/bottles Itsdpfxswpr Ifs Achok Automatic cap application Very compact dimensions (Basic Version 2,000 x 750 mm) Filling volume infinitely adjustable Very easy operation of the machine Connection to a labeling machine possible Pictures may show additional options

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Itsdpjzrw E Sofx Achek

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Itjdpjzcbmijfx Achsk Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available—please feel free to contact us for details. Leitz | PMM 12106 with PH10 and SP25 Scanning System Refurbished coordinate measuring machine featuring the latest Renishaw technology Modernized in 2021 Measuring range XYZ: 1200 x 1000 x 600 mm Measurement uncertainty MPE (E0): 1.2 + L/400 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system, including FCR25-L6 (6 port) probe changer - MODUS metrology software, latest version, with CAD import (STEP format), including 1-year software maintenance - PC system with Windows 10 and two new 27" TFT monitors, height-adjustable desk included - Control cabinet with state-of-the-art safety features - M6 base plate We are happy to customize the configuration to meet your requirements. Machine sales and service only available within Germany! Iedpfx Acovxh Diehotk Optional service packages upon request: Free curbside delivery | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Additional options and configurations available upon request

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edgebanding machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off. Segment width of the pressure beam 35mm Contact roller pneumatically adjustable, low wear due to corrugated steel roller Grain equalization Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the top part of the machine, thus also integrable in sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outlet table Itjdpfszqvmrjx Achsk Preparation for vacuum blower. The belt is perforated and connectors for an optional blower are available. Alternatively, the belt can also be connected to the dust extraction system. Dust extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam insertion points front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual Without the connection cable shown Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Year of construction: 2002, condition: good (used), machine/vehicle number: 90996-1, Pizza electric oven Brand: Moretti Forni Rialto, type RHC / 18 CZ Year of manufacture: 2002 Serial number: 90996-1 Pizza oven frame support on rollers. The oven has 3 chamotte Thermal insulation electric oven 1 pizza room of 12 pizza Ø 30 Isdjg H Tlzjpfx Achstk Fibreglass insulation Viewing windows emergency stop Digital display Digital temperature display Digital control unit Heat resistant materials Athermal door handles Baking surface made of special cotton wool under the effect of heat Adjustable temperature Temperature: 400 ° C constant temperature (even with frequent opening) connection Power: 9.3 kW Electrical connection: 3 / N / PE 400 volts / 50 Hz Size: Oven external dimensions: L x W x H: mm 1600x1350x650 Oven interior dimensions: L x W x H: mm 1300x950x180 Dimensions of the structure on rollers: L x W x H: mm 1600x1150x900 Total external dimensions: L x W x H: mm 1600x1350x1550 Price: 1,600 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. We reserve the right to make mistakes, modifications and prior sale. You can make us a firm offer if you are interested in this pizza oven. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2001, operating hours: 18,250 h, functionality: fully functional, machine/vehicle number: 6097/01, type of input current: three-phase, total height: 2,000 mm, total width: 3,000 mm, total length: 5,000 mm, control cabinet height: 2,000 mm, control cabinet length: 800 mm, control cabinet width: 600 mm, input voltage: 380 V, temperature: 950 °C, control voltage: 220 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: documentation/manual, Morgan gas electric tilting aluminium oven type GE60, platform and Foseco rotor degasser. Itedszhad Aspfx Achjk Year 2001 and 18400 operating hours. Melting capacity: 500kg aluminium Comes with 1 extra graphite crucible and stand.

Condition: used, Year of construction: 1999, total width: 1,800 mm, total height: 2,320 mm, total length: 1,700 mm, Colour: White Empty weight: 2.500 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 99125681 - Number of units [pcs]: 2 Ijdezr Hx Uspfx Achotk - └ Unit 1: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 175 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Top - - Type of unit: Contact roller - - Sanding belt length [mm]: 1890 - - Sanding belt width [mm]: 1110 - - Roller diameter [mm]: 1750 - - Roller material: Rubber - - Motor power [kW]: 18.5 - Max. working width [mm]: 1100 - Min. working height [mm]: 30 - Max. working height [mm]: 183 - Infeed table length [mm]: 400 - Outfeed table length [mm]: 250 - Feed motor [kW]: 0.75 - Voltage [V]: 380 - Current consumption [A]: 36 - Fuse [A]: 63 - Transport dimensions: 1700mm x 1800mm x 2320mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, overall weight: 4,500 kg, Lease return vehicles. Ijdpfx Aezvdcrjchotk

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg Itjdpfx Acjxgf Scohsk — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm