Used Automatic Pallet Wrapper With Film Pre-Stretch for sale (37,384)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G Lodpszuzw Djfx Almerr AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2016, condition: good (used), Haloila CobraX Pallet wrapper 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph Lrsdpfjrywtbox Almor

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units Lrsdpfx Aljzb N Rtemjr 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.

Condition: used, Year of construction: 2008, Format: 530 ?? 350 ?? 300 mm Speed: 1.500 Stapel/Stunde Power: NULL Net Weight: 4.500 kg Equipment: Lsdpozpzw Tsfx Almorr Feeder Conveyor: Solema Delta ST conveyor belt with index timer and accumulation feature Continuous Product Alignment: Active during transport Turning Station: Programmable product rotation: 90?? left/right and 180?? Pressure disc for product positioning during rotation Servo-motor driven with product gap creation function Pallet Elevator Platform: Roller surface platform Pallet Compatibility: Compatible with all standard pallet types Pallet Discharge: Motorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine Capacity: Up to 6 pallets Flexibility: Handles various pallet types and dimensions Design: Compact footprint Automatic Interleaf / Sheet Feeder Programmable: Placement on empty pallets or between designated layers Requirement: Requires straight-cut, wrinkle-free interleaf sheets Reject / Emergency Ejection Station Stack Height Detection: Integrated photocells for monitoring stack height Quality Control: Detects and ejects non-compliant stacks to prevent counting errors and s Control System User Interface: Windows-based touchscreen operation panel Job Memory: Recipe management to save and recall job settings Automated Changeover: Automatic format changeover via servo mot Pallet Discharge System Conveyor Type: Motorized chain conveyor (length corresponds to one pallet size) Discharge Height: Approx. 130 mm above pallet height

Condition: new, Year of construction: 2023, functionality: fully functional, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines in which a powerful rotary arm combined with a reliable pre-stretch system enables precise wrapping of the pallets. This advanced technology allows the packaged goods to remain unchanged during the wrapping process. This makes rotary arm wrappers particularly suitable for pallets with light or unstable goods and for loads that are difficult to maneuver. - Maximum product height: 2,000 mm Lredpfxjr Nc Sps Almjr - Maximum pallet dimensions: 1,200x1,200mm - Minimum weight: 45kg

Condition: used, Year of construction: 2006, Format: 0x0 Equipment: Infeed:Solema Delta ST conveyor belt with cycle memory and accumulation featureContinuous product alignment during transport Turning Station:Programmable product rotation: 90?? left/right and 180??Pressure disc for product positioning during rotationServo-motor controlled with product gap creation function Pallet Elevator:Roller-surface platformCompatible with all standard pallet typesMotorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine:Capacity: 6 palletsFlexible pallet type and dimension handlingCompact design Automatic Interlayer Feeder:Programmable: placement on empty pallet or at defined layersStraight-cut, wrinkle-free interlayers required Reject Delivery:Integrated stack height control cellsNon-compliant stacks are detected and ejected to prevent counting errors and stack instabilityPrevents faulty stacking before palletizingManual ope Control System:Windows-based touchscreen operating interfaceProgram memory for saving and retrieving jobsAutomatic format changeover via servo motorsNew job data can be loaded while the machine is run Pallet Discharge System:Motorized chain conveyor (length corresponds to one pallet)Discharge height: approx. 130 mm above pallet height Ljdpfx Aezpzw Helmorr

Year of construction: 2005, condition: good (used), Finnish-made, automatic film wrapping machine with infeed and outfeed conveyors, and strapping for securing the package to a wooden pallet. Lrsdpfx Aljy Uagmjmor

Year of construction: 2026, condition: new, functionality: fully functional, BRONSE ULTIMA 250 | Fully Automatic Stretch & Cling Film Slitter Rewinder The ULTIMA 250 is a fully automatic, high-performance slitting and rewinding machine engineered for extreme ease of use, maximum versatility, and continuous industrial production. Built with high-end electronic and mechanical components, it ensures precise tension control and reliable long-term operation. Key Applications & Versatility: Lredpfx Aoy N Un Islmsr Multi-Product Output: Seamlessly produces stretch film hand rolls, machine rolls, and jumbo rolls, as well as PVC/PE cling film rolls. Flexible Core Diameters: Easily adjustable to produce rolls with various core diameters to meet rapidly evolving market demands. Advanced Slitting Capability: Equipped with a precise longitudinal cutting platform. Technical Features & Dimensions: Slitting Configuration Options: From 50 mm x 10 rolls up to 250 mm x 2 rolls. User-Friendly Interface: Operated via an embedded main control panel for flexible, intuitive, and safe management. Low Maintenance & High Ergonomics: Designed so that all manual operations and routine maintenance can be easily performed, even by inexperienced operators. For detailed technical specifications, quotation, and video demonstrations, please send us an inquiry directly through Machineseeker.

Year of construction: 2012, condition: as good as new (ex-display), functionality: fully functional, We now offer a Linea Pack Avvolgipack 40 CA, a high-quality machine for horizontal wrapping of products. This particular unit is from 2012 but has only been used as a demonstration model. As such, it is in absolutely mint condition and has never been operational in production. Elongated products: It is ideal for items such as pipes, mouldings, metal profiles, boards, or rolls. Bundling: When several smaller units need to be combined into a package, for example multiple pipes, carpets, or timber. Protection against external influences: Just like conventional pallet wrapping, it provides effective protection against moisture, dirt, and transport damage. The machine is available for immediate delivery. Shipping costs are additional. Model: Avvolgipack 40 CA Year of manufacture: 2012 Machine height: 1,390 mm Machine width: 924 mm Machine depth: 2,674 mm Capacity: 3-25 m/min (throughput) Lredoy N Uqvepfx Almor Power supply: 220V, 0.37 kW Max product height: 190-250 mm (depending on product width) Machine weight: approx. 400 kg

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Lrodpfx Alsxn Iq Demer Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Year of construction: 2016, condition: used, Stretch wrapper, year of manufacture 2016, MH-FG-2000B, with ramp Lredpfoyzxncjx Almor

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Ledpfx Aoyyy Dpslmerr Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Year of construction: 2026, condition: used, consisting of: 1 PAMMINGER Flyer 2.4 VA stretch wrapping unit, year of manufacture: 2009, serial number: M00812, 1 MESSERSI PR9 banding unit, year of manufacture: 2009, serial number: 3421, roller conveyor, protective enclosure, control system. Lrodpjzqzb Iofx Almer

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Lrsdpfx Asi D D Efolmer Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Lredpfx Aloxyff Nomer Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK AEM-1080Q is a fully automatic, high-performance die-cutting machine with a stripping station, specifically designed for the precise processing of cardboard, solid board, and corrugated board. It is ideally suited for the production of high-quality packaging with exact die-cut contours and clean removal of the die-cut waste. Thanks to its robust construction, high die-cutting force, and modern automation, the KMK AEM-1080Q offers maximum productivity while maintaining the highest precision. It is the perfect solution for packaging manufacturers who rely on speed, reliability, and first-class quality. ### Highlights * Fully automatic die-cutting machine with integrated stripping station * Die-cutting force up to 350 tons * High production speed of up to 6,500 sheets per hour * Precise die-cutting accuracy of ±0.1 mm * Suitable for cardboard, solid board, and corrugated board * Automatic feeder and delivery system * High production reliability and ease of operation * Robust industrial design for continuous operation * Short setup times and high cost-effectiveness ### Applications The machine is ideally suited for the production of: * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Shipping packaging * Displays * Packaging made of cardboard and corrugated board * Labels and special packaging ### Technical Data * Maximum paper format: 780 × 1,080 mm * Minimum paper format: 360 × 400 mm * Maximum die-cutting format: 770 × 1,075 mm * Internal dimensions of the die: 790 × 1,100 mm * Die plate format: 780 × 1,080 mm * Minimum gripper margin: 8 mm * Die-cutting accuracy: ±0.1 mm Ljdpfx Aszg E Sislmjrr * Maximum die-cutting force: 350 t * Production speed: up to 6,500 sheets/hour * Feeder stack height: 1,550 mm * Delivery stack height: 1,400 mm * Material thickness, cardboard: 0.1 – 2.0 mm * Corrugated board: up to 4 mm * Main motor: 11 kW * Total power: 17.8 kW * Machine weight: approx. 17,600 kg * Machine dimensions (L × W × H): 5,880 × 2,100 × 2,350 mm (plus pre-feeder and operator platform) ### Standard Equipment * Automatic high-stack feeder * Precise die-cutting system * Integrated stripping station * Automatic delivery system * Robust die plate * User-friendly machine control * High-quality safety and monitoring systems ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on site ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approx. 6–8 weeks after order receipt ### Machine Type Fully automatic die-cutting machine with integrated stripping station KMK AEM-1080Q

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Ledpjv D Ezisfx Almjrr Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Year of construction: 1997, condition: excellent (used), Ulma Superchik Stretch Wrapper 2 units available from 1996 and 1997 Lrjdpfx Alownx Amomsr Regularly serviced and well maintained by the previous owner

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 13205, For sale is a pallet wrapping machine from the manufacturer STREMA. This machine is ideal for operations that value transport safety and efficiency. Technical details: Manufacturer: STREMA Stretch Packaging Systems Model: M 500 Year of manufacture: 1997 Machine number: 13205 Connection: 400 V Power: 0.4 kW Base dimensions: 2,500 x 1,500 mm Turntable diameter: 1,500 mm Total height: 2,500 mm Recommended installation area: 4 x 3.0 m Max. pallet weight: 1,500 kg Lredpfx Aley Em Dtjmor Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT Inspection possible by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Paletrapper for industrial and Euro palett, with roller conveyour and strech foiling machine Lsdpsxytr Dsfx Almerr

Condition: good (used), Strapping machine, packaging machine, strapping machine, skin packing machine, pallet wrapper, control panel, control unit, control panel, Simatic panel Lrsdpfxjl U E Ufe Almjr -Manufacturer: Spinny Siemens, control from pallet wrapper S200 -Text display: Siemens Simatic S7 TD200 6ES7272-0AA30-0YA0 -Quantity: 4x controls available -Price per piece -Dimensions: 180/95/H450 mm -Weight: 2.4 kg/pc.

Year of construction: 2010, condition: good (used), machine/vehicle number: 3302, Outer diameter of the core: 450-600 mm; Lrodpszp Dw Nsfx Almsr Outer diameter of the flange: max. 1200 mm; winding width: 100–400 mm. Smooth tube with an outer diameter of 10-40 mm, or corrugated tube with an outer diameter of 40-110 mm, max. 20 m/min.

Year of construction: 2001, condition: good (used), Incl. cutter, binding unit, ejection device ø 20-75 mm Ljdswvh U Uspfx Almorr

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Lrodpfx Alsyzt Nzemor

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Lsdpeyyxxfefx Almerr Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)