Used Amersham Biosciences Amersham Biosciences Akta Purifier 100 / Frac-950 Fraction Collector for sale (24,910)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,220 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 700 kg, total length: 670 mm, drive type: Elektro, construction width: 730 mm, Low lift pallet truck Load center: 600 mm Mast type: None Technical condition: very good Front tires type: Polyurethane Front tires condition: 100% Rear tires type: Polyurethane Rear tires condition: 100% Battery voltage: 24V Battery capacity: 400Ah Battery manufacturer: Kapatest 100% Laedpsykvxiefx Ampea Battery year: 2021 Description: Factory-refurbished used equipment from Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG Lsdox Sz Efopfx Ampsaa • Wavelength: 1064 nm • Beam quality (M²): 13 (6 kHz, MM);

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 253000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Lodpjy Dhrpsfx Ampoaa Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Colchester Tornado 100 CNC Lathe - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg - Turret with 12 stations - VDI 3425 / 30 tool holders Hydraulic collet and chuck Laedpfjy Einhsx Ampsa

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Lodey Eizujpfx Ampeaa Location: Flörsheim Availability: Immediately

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Lajdpfx Amjh Eyd Rspsa Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW Lsdpfx Aeiyyc Esmpjaa 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit Ljdoi Dtb Ujpfx Ampeaa pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump Lodpfxod Sg I Io Ampoaa ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: used, Year of construction: 2016, operating hours: 528 h, 2016 | Wacker Neuson RD24-100 | Used Tandem Roller | 528 hours Ljdeycy Dmjpfx Ampsaa 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 36 inspection points 33 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit is under very good condition, first hand machine, it worked well during the inspection. Nothing important to signal. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40155 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 100 t, stroke length: 315 mm, overall weight: 8,000 kg, Hydraulic Press Brake Manufacturer: BYSTRONIC Model: Xpert 100/2050 Year of manufacture: 2011 Technical Data Make: BYSTRONIC Model: Xpert 100/2050 Year: 2011 Press Force: 100 t Bending Length: 2000 mm Stroke: max. 315 mm Motor Power: 7.5 kW Dimensions: approx. L 3.10 x W 1.90 (plus support arms) x H 2.85 m Weight: approx. 8 t Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • PILZ Fast Bend light barrier • Controller: MMC BYBEND • Hydraulic tool clamping (top and bottom) • Hydraulic pressing table!!! • Movable support arms • CNC-controlled crowning Lajdpfx Ajy Ef Rxsmpsa • 1 upper tool, gooseneck, H 150mm, 80°, segmented • 1 lower tool V12 All information is supplied without liability. A demonstration in our showroom is possible at any time.

Condition: used, mileage: 23,850 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 04/2023, color: blue, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, traction control, = Additional Options and Equipment = - Right-hand sliding door - Android Auto - Apple CarPlay - Attention assist - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Bluetooth - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Driver airbag Laedex E U U Tjpfx Ampja - Remote central locking - Hill-hold control - Wooden loading floor - Height-adjustable driver’s seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multimedia compatible - Fog lights - Emergency brake assist - Radio - Radio with DAB - Radio with DAB+ (WLZ1) - Rain sensor - Reversing camera - Immobiliser - Heat-insulating glass - Connected services - Partition wall = Further Information = General information Number of doors: 5 Model range: July 2020 - August 2022 Cab type: single Technical information Torque: 260 Nm Transmission Transmission: 1-speed automatic Performance Maximum speed: 130 km/h Dimensions Length/height: L2H1 Dimensions (L x W x H): 496 x 192 x 194 cm Weights Unladen weight: 1,837 kg Payload: 1,028 kg Gross vehicle weight (GVW): 2,865 kg Max. trailer load: 1,000 kg (unbraked 750 kg) Battery Battery present: Purchased Battery capacity: 52 kWh Charging port: Type 2 Fast charging capability: Yes Fast charging socket: Combined Charging System Interior Interior: black Maintenance, history, and condition Service booklets: Available APK (vehicle inspection): valid until 04/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 15,740 km, power: 100 kW (135.96 HP), first registration: 12/2022, fuel type: electric, axle configuration: 4x2, wheelbase: 2,930 mm, fuel: electricity, color: blue, gearing type: automatic, number of gears: 1, number of seats: 2, total length: 4,610 mm, total width: 1,920 mm, total height: 1,950 mm, Year of construction: 2022, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, navigation system, onboard computer, power mirror, sliding door, traction control, = Additional Options and Equipment = - Right-hand side sliding door - Automatic dip beam headlights - Heated exterior mirrors - Passenger airbag - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Wooden cargo bed - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front centre armrest - Multimedia functionality - Emergency braking assistant - Radio - DAB radio - Rain sensor - Reversing camera - Immobiliser - Bulkhead partition = Further Information = General Information Number of doors: 5 Model range: July 2020 - Aug. 2022 Cab type: single cab Technical Information Torque: 260 Nm Performance Top speed: 130 km/h Dimensions Length/height: L1H1 Weights Unladen weight: 1,801 kg Payload: 1,029 kg Gross vehicle weight: 2,830 kg Max. towing capacity: 1,000 kg (braked: 750 kg) Battery Battery present: Purchased Battery capacity: 52 kWh Charging port: Type 2 Fast charging capable: yes Fast charging connector: Combined Charging System (CCS) Interior Interior colour: black Maintenance, History, and Condition MOT (Main Technical Inspection): valid until 12/2026 Lsdsx Hadpopfx Ampoaa Number of keys: 2 (2 remote fobs) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Year of construction: 2016, fuel type: electric, color: red, Drivetrain Make of engine: Electric motor Weights Empty weight: 2.650 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 985 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Non-marking solid Delivery terms: EXW Max. horizontal reach: 315 m Max swing of arm in degrees: 350 Max swing of platform in degrees: 70 Transport dimensions (LxWxH): 2,8x0,99x1,99 Production country: FR Ljdpfxexct D So Ampeaa Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), mileage: 186,068 km, power: 74 kW (100.61 HP), first registration: 01/2020, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, CO₂ emissions: 122 g/km, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,830 mm, total width: 1,840 mm, total height: 1,850 mm, permissible axle load (axle 1): 1,225 kg, permissible axle load (axle 2): 1,165 kg, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, power mirror, sliding door, traction control, General information Number of doors: 3 Cab: single Ljdpfx Ajyi Udnompjaa Registration number: VDZ-99-S Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Axle configuration Tyre size: 205/60R16 Brakes: disc brakes Front axle: Max. axle load: 1225 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1165 kg; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 1.540 kg Carrying capacity: 745 kg GVW: 2.285 kg Max. towing weight: 1.350 kg (unbraked 750 kg) Consumption Average fuel consumption: 4,6 l/100km (61 MPG) Urban fuel consumption: 4,9 l/100km (58 MPG) Extra urban fuel consumption: 4,2 l/100km (67 MPG) Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Bumpers in color - Climate control - DAB Radio - Heated door mirrors - Metallic paint - Multifunctional Steering Wheel - Parkingsensors back - Radio/Cd/Audio system - Reversing camera - Side Door Right = Remarks = VIDEO: Very nice and neat Ford Transit Connect 1.5 TDCI 100 hp Euro 6 L2 Extended version 186,000 km NAP Dealer maintained Air conditioning / Cruise control / Climate control Reversing camera / Navigation / Paneled cargo area Technically and visually in good condition

Condition: used, functionality: fully functional, TECHNICAL DATA: Condition: Used Model: Roller Conveyor Segment length: approx. 2,500 mm Overall width: approx. 950 mm Roller width: approx. 855 mm Roller diameter: approx. 60 mm Roller pitch: approx. 150 mm Brake rollers: Yes Material: Steel STOCK AVAILABLE: 130 units Net price per segment: €105.00 Gross price per segment: €124.95 Tiered pricing possible YOUR CONTACT PERSONS: Oliver Kopp Ljdpfx Amexwpglepoaa Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional charge. Extra costs depend on the delivery location and shipment size, and can be provided upon request. PAYMENT TERMS Payment terms to be agreed upon in the event of an order. Prices are per unit/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice stating the VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and handicraft. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, feel free to contact us. Four wins – The building blocks of DLK’s success – Storage technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), machine/vehicle number: XLEP4X20005290070, mileage: 450,638 km, power: 169 kW (229.78 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 10,050 mm, total width: 2,600 mm, loading space length: 8,020 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Year of construction: 2012, Tail lift: dhollandia XLEP4X20005290070 Cool unit brand: Carrier = More information = Number of cylinders: 5 Engine capacity: 9.290 cc Empty weight: 11.120 kg Carrying capacity: 7.880 kg GVW: 19.000 kg Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Lodpfxoymqzdo Ampoaa Registration number: BZ-VX-49 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), Year of construction: 2008, Retrofitted: 2026 Numerical control: SIEMENS 840D Lsdpeyvwchsfx Ampjaa Technical features Dimensions Table dimensions: OptionalMaximum weight on table (kg/m2): OptionalNumber of T slots: UndefinedT slots dimensions: Undefined Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 0 - 2500 mm (adjustable) Milling head Head type: Universal Auto-indexing UAD (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y-Z): 30000 mm/min Weight and dimensions Machine weight approx.: 70000 kgMachine dimensions approx.: 17560 x 12800 x 4270 mm Accessories Guarding: pendular with automatic front door and peripheral safety fenceAutomatic tool changer: ATC80 with electrical motorsChip conveyor: 1 front longitudinal and 1 transversalExternal coolant high-pressure coolant through spindleElectronic handwheel: 6FX2007-1AE14 SiemensOperator´s cabinet: adjustable in vertical traverse Other technical features 2 ROTARY TABLES:Model:   DEMMELER DRLTS1800Table surface: 2400 x 1800 mmMaximum load on table: 40 TT slots number: 9T slots dimensions: 22 mmRotary axis: HydrostaticMaximun speed (S1/S6): 3.4 / 5.4 r.p.m.Clamped tangencial torque: 175000 NmW axis: 1500 imum feedrate: 20000 mm/ntity of guideway (W axis): 4 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Year of construction: 2010, condition: like new (used), 2. air cleaning plants Laedsdt E Akspfx Ampsa Flow rate Max 1450 m³/h Speed 0.7 m/s Voltage 230 V, 50 Hz Dimensions L x W x H 800 x 800 x 1250 mm / system Weight: 160 kg / plant New price: €7.200,00 / PCs. Need new replacement filters and parts about us can be ordered! Price: €3.990,00 / PCs. plus VAT VAT Siegfried Volz machine tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2008, Ref. -No.: 10624 Manufacturer: HEDELIUS Type: RS 100 MAGNUM Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN 530i Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 mm Y-Travel: 1000 mm Z-Travel: 770 mm Main spindle drive power: 55 kW Table Load: 4000 kg Max. Tool Weight: 20 kg Max. Tool Length: 330 mm Max. Tool Diameter: 125 mm Tool Taper: SK 50 Tool Piece Magazine With: 50 Pcs./pcs. Turning Speeds: 6000 RPM Lasdpfoy Ed Rwox Ampja Feed Speeds X/Y/Z Axis: 30000 mm / min Further information: - With rotary/swivel table (1.00 x 0.80 m) - Guide rail cover replaced The machine can be viewed while powered up.

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 540 kg, total width: 1,000 mm, total length: 1,195 mm, input frequency: 50 Hz, electrical fuse: 16 A, Spiral Kneader Kemper F 100 S Laedpjyhznbofx Ampsa Dough machine Kemper Model: F 100 S 2 speeds Simple, robust engineering Only from us: DGUV V3 safety inspection Connection: 400V, 16A-CEE plug Used machine, cleaned Options: Maintenance contract Spare parts kit Service package Delivery service Training & commissioning Visit our large exhibition!

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm Ljdpfx Aovb Dcajmpoaa ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfx Ajwp H Efompsaa Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg Ledpfxjyf Hpzs Ampjaa - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 Laedpfjx N Sxdsx Ampja - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum