Used Almex Expander Al300 for sale (443)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer was €486,000 (net)! Njdpjymwzdefx Aaaecr TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly duty cycle: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 g/m² up to 350 g/m² Paper weight range (validated): up to 400 g/m² Duplex printing media weight: 350 g/m² MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Main unit dimensions C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like quality Supports specialty and textured media In-line sensors for color management Automatic calibration

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Ncjdpfxsyx Uy As Aaaer Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Used MESAL filling triblock - 18000 BPMTechnical Specifications & Performance DataThis MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation.Manufacturer: MESALModel: E50-60-15GA1Year: 2013Production speed: up to 18,000 bottles/hourConfiguration: Rinser/Filler/Capper tri-blockFiller valves: 60Rinser grippers: 50Capper heads: 15Container type: PETBase format: 0.38L (380 ml)Neck finish: 38 mmFill principle: Weight (gravimetric)Operating type: AutomaticElectrical: 400 V, 60 HzControl system: Omron PLC/HMIApproximate weight: 8,000 kgAdvanced Automation & Control SystemsThe machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation.Omron PLC with modular I/O and clear status indicatorsTouchscreen HMI for parameter management and alarmsAutomatic operation with synchronized turretsDesigned for stable weight-based filling accuracyElectrical supply: 400 V, 60 HzProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint.Inline integration with standard bottle conveyorsRinser/Filler/Capper tri-block layout for reduced floor spaceSuitable for still beverages: juice and teaDesigned for PET bottles with 38 mm neckBase format 0.38L; additional formats can be supported with change partsMachine Condition & Maintenance HistoryThe machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and... Nsdpsyhbgaefx Aaaecr

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Manufacturer: Mathias Bäuerle Model: Prestige NET 52 6-6 Folding machine in excellent, as-new condition, recently overhauled Counter reading: 12 million Automatic adjustment of folding pockets, rollers, and rulers A folding machine with state-of-the-art features First folding unit with 6 pockets, new steel-PU segment rollers Nodpfx Ajywd Efoaajcr Second folding unit with 6 pockets, new steel-PU segment rollers 8 of the folding pockets are pharmaceutical folding pockets, allowing a minimum fold length of 27 mm Formats: min.: 100 x 120 mm, max.: 520 x 850 mm Minimum fold length: 35 mm, with pharmaceutical-quality pocket: 27 mm FSA flat pile feeder, Pico 40³ compressor Sheet tracking, double-sheet detection, 20 pre-set folding types Memory for up to 200 folding jobs Batch-delivery table Window fold pocket (new price) €5,300 380 Volt / 16 A Year of manufacture: 2014 Condition: Refurbished and as-new Service available Optional accessories (currently not included): SKM 36 vertical delivery with kicker Small folding unit KF 31 Clip-on 2-pocket folding unit Minimum fold length 17 mm Expands the folding unit by 2 additional pockets (from 6 to 8 pockets), can be used in both folding units

Condition: used, Year of construction: 2004, Used Horizon VAC-60Hc Collator, used The Horizon VAC-60Hc is a powerful collator designed for efficient and reliable paper handling in professional print finishing environments. Key Features: - Loading capacity: 130 mm per bin - Modular design: Tower with 6 feed stations, expandable up to 6 towers for a total of 36 stations - Suction and air-blow technology: Uses Horizon's advanced technology for consistent and reliable sheet feeding with various paper types and weights - Versatile paper processing: Handles sheets from 148 x 120 mm to 500 x 350 mm, with paper weights from 40 to 250 g/m² - High production speed: Up to 9,500 sets per hour, depending on paper size and configuration - User-friendly operation: Intuitive interface for easy job setup and control - Advanced error prevention: Equipped with miss-feed, double-feed, and jam detection for improved accuracy and reliability - Job memory: Ability to store recurring jobs for increased efficiency Technical Specifications: - Dimensions: 842 x 652 x 1,961 mm - Weight: 310 kg - Power supply: 230V, 50/60Hz - 1.86kW Ncedpfxexgd Sze Aaaor All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A Nodpfxoyr R Egs Aaajcr 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: excellent (used), Overview The MultiGraf 435SM is a robust, fully-automatic modular folding system — professionally refurbished and ready for immediate production. Designed for high-accuracy folding across a wide range of applications, this machine features four automatic folding plates and a precision suction feeder, delivering reliable results whether you’re producing high-volume leaflet work, cross-folded mail inserts, or specialist pharmaceutical folds. Thanks to its modular engineering, the 435SM can be expanded with cross-fold units, high-capacity feeders, miniature fold plates and vertical stackers — allowing the system to evolve as workflow demands increase. Fast setup via the Touchline digital control panel ensures efficient job changes, while the combination steel and rubber roller system provides clean, consistent folds even at high speeds of up to 25,000 sheets per hour. Ideal for commercial print rooms, mailing departments and finishing operations requiring flexible, high-quality, and upgradeable folding capability without the investment of a brand-new machine. Key Features Four fully automatic folding plates — wide range of fold configurations including complex pharmaceutical folds Precision suction feed system — consistent, mark-free handling across varying paper stocks High productivity — speeds up to 25,000 sheets/hour, ideal for short to medium run folding Touchline touchscreen control — quick setup, easy adjustment, and built-in batch counting 500-sheet feed table — stable, continuous feeding for longer production runs Combination steel and rubber rollers — accurate, uniform fold quality Nedpsx Sya Isfx Aaajcr Modular upgrade path — compatible with cross-fold units, high-capacity feeders, miniature plates and more Paper size range A6 to A3+ — versatile handling for both small-format and large-format folding Optional scoring and perforating unit — for enhanced finishing capabilities Maximum paper size: Standard: 375 × 500 mm With optional extension table: 375 × 650 mm Specifications Manufacturer Multigraf Model 435SM Min sheet size 90mm x 120mm Max sheet size 375mm x 500mm or 660mm with extension Paper weights 40gsm - 250gsm Feeder system Suction - bottom feed Speed Variable - up to 25,000 per hour Control panel Icon based touchscreen Electrical requirements 230v 50/60Hz Machine weight 174kg Machine dimensions (L)1535mm x (D)500mm x (H)1225mm

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Ncedpfeqv E S Rjx Aaaer Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: new, functionality: fully functional, power: 8.6 kW (11.69 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, cabin, The GG800NXC Expandable Tracks Movable Arm Operating weight: 1,000 kg Bucket capacity: 0.025 m³ Bucket width: 380 mm Engine: Gunter Grossmann Diesel Euro 5 Rated power: 8.6 kW / 3600 rpm Main pump: Wayne Hydraulic Hydraulic pressure: 16 MPa Swing motor: Dalí Travel motor: Dalí Travel speed: 1.5 km/h Max digging depth: 1,650 mm Max digging height: 2,610 mm Max dumping height: 1,850 mm Max digging radius: 2,890 mm Swing radius: 360° Ncsdpfx Aaoxuwuxsasr Max dozer blade lift height: 345 mm Max dozer blade digging depth: 255 mm Length: 2,770 mm Width: 930 mm Height: 2,100 mm Track length: 1,230 mm Chassis width: 896 mm Track width: 200 mm is a compact, professional mini excavator ideal for precise operation in hard-to-reach areas. The enclosed cab provides the operator with comfort and protection in all weather conditions. With a weight of 1,000 kg and a 0.025 m³ bucket (380 mm wide), it allows efficient excavation in confined spaces. Powerful and environmentally friendly performance The GG800NXC is powered by an EU Stage V-compliant Gunter Grossmann diesel engine (8.6 kW at 3,600 rpm), providing reliable and eco-friendly operation. The 16 MPa Wayne hydraulic system and Dali motors ensure smooth, responsive controls with a travel speed of 1.5 km/h for optimum mobility. Wide working range It offers a digging depth of 1,650 mm, a height of 2,610 mm, and a 360° swing range for maximum maneuverability. A dumping height of 1,850 mm and a dozer blade lift height of 345 mm enable versatile earthmoving in varying conditions. Compact and reliable With dimensions of 2,770 x 930 x 2,100 mm, the GG800NXC is easy to transport and highly agile. Its robust construction and enclosed cab make it ideal for year-round use by contractors, landscapers, and private users seeking a dependable mini excavator.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 190 mm, load center: 500 mm, fuel type: electric, overall weight: 160 kg, total length: 1,670 mm, total width: 685 mm, color: orange, Data Sheet Electric Pallet Truck - Lifting Capacity 2000 KG Distinctive Features: Load Capacity: Up to 2000 kg Precision Mode (Turtle Function): Enables slow, controlled movements for high accuracy during operations in tight spaces. Large Controls: Large buttons easily accessible even when wearing protective gloves. Multifunction display: Real-time monitoring of battery level, hours of use and diagnostic system. Vertical tiller steering: Functionality that enables optimal maneuverability in narrow aisles, elevators and inside trucks. Battery: Battery type: maintenance-free AGM (Absorbed Glass Mat). Nsdpeun Imrofx Aaaecr Specifications: 48V / 25Ah. Charging time: About 3.5 hours. Operating time: About 5 hours of continuous operation. Expandability: Ability to add a second battery to extend uptime. Technical Specifications: Dimensions (Length x Width): 1670 x 685 mm Total weight (including battery): 160 kg Maximum lifting height: 190 mm Distance from the center of gravity (C): 500 mm Overall width of forks: 560 mm Turning radius: 1460 mm Minimum ground clearance: 24 mm Maximum surmountable slope: 6% with load, 20% without load Power supply: Power supply type: Electric Voltage: 48V Battery capacity: 25 Ah

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 190 mm, load center: 500 mm, fuel type: electric, overall weight: 160 kg, total length: 1,670 mm, total width: 685 mm, color: orange, Data Sheet Electric Pallet Truck - Lifting Capacity 2000 KG Distinctive Features: Load Capacity: Up to 2000 kg Precision Mode (Turtle Function): Enables slow, controlled movements for high accuracy during operations in tight spaces. Large Controls: Large buttons easily accessible even when wearing protective gloves. Multifunction display: Real-time monitoring of battery level, hours of use and diagnostic system. Vertical tiller steering: Functionality that enables optimal maneuverability in narrow aisles, elevators and inside trucks. Battery: Battery type: maintenance-free AGM (Absorbed Glass Mat). Specifications: 48V / 25Ah. Charging time: About 3.5 hours. Operating time: About 5 hours of continuous operation. Expandability: Ability to add a second battery to extend uptime. Technical Specifications: Dimensions (Length x Width): 1670 x 685 mm Ncjdpfovb Ty Iex Aaaor Total weight (including battery): 160 kg Maximum lifting height: 190 mm Distance from the center of gravity (C): 500 mm Overall width of forks: 560 mm Turning radius: 1460 mm Minimum ground clearance: 24 mm Maximum surmountable slope: 6% with load, 20% without load Power supply: Power supply type: Electric Voltage: 48V Battery capacity: 25 Ah

Condition: used, Wiesheu convection ovens models B4-E2 and B8-E2 are designed for professional use in bakeries and food service environments. The units are used but fully functional and ready for operation. These models offer capacity for 5 and 10 trays, making them suitable for different production needs. Sold only as a complete set, they provide a practical solution for equipping or expanding bakery operations. Machine type : Convection oven Wiesheu B4-E2 & B8-E2 Wiesheu , type B4-E2 & B8-E2 ( ovens for 5 and 10 tray ). Sold only in complete set ! Technical data : B4-E2 : Electric power : 9.2kw Watter pressure : 150-250kPa Nsdpfx Aoy Avkdjaaecr Voltage : 400V Frequency : 50Hz B8-E2 : Electric power : 18.4kw Watter pressure : 150-250kPa Voltage : 400V Frequency : 50Hz

Condition: used, empty load weight: 20,000 kg, maximum load weight: 66,000 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, first registration: 12/2013, next inspection (TÜV): 03/2026, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 245/70R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Air suspension, 6 axles, BPW axles, 1st axle liftable, forced steering, lift and lower function, ABS (anti-lock braking system), central lubrication system, extendable, width expandable up to 3m, lashing rings, hydraulic ramps, front support, rear support, EBS. Body: Telescopic extension by 7m. Fully extended: 21.25m, bed length: 10 - 17m. Storage box on gooseneck: L: 2450 mm, W: 2450 mm, H: 450 mm. 2-inch kingpin, 5 hydraulically/mechanically forced-steered axles, 5 x 10t BPW axles, 2 central lubrication systems, hydraulically adjustable gooseneck, hydraulic pump powered electrically by the tractor unit (hydraulics can also be connected from the tractor unit), radio and cable remote control. Ncsdpoxc Nztefx Aaasr Tyres between 50 and 80%. ACCESSORY DETAILS WITHOUT LIABILITY, changes, prior sale, and errors excepted!

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Nsdpfxoxvpd Us Aaaecr Container material: PET Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: excellent (used), Year of construction: 2024, For sale is a high-quality MIDI PRO benchtop woodturning lathe in demonstration condition with minimal signs of use. The machine has been used only occasionally and is in excellent technical and visual condition. Nedpfsyuubqsx Aaaecr This compact yet extremely robust benchtop lathe is perfectly suited for bowls, boxes, small vases, and precise turning tasks. Thanks to the rotatable and adjustable headstock, it offers especially versatile applications and ergonomic operation. Ideal for passionate hobbyists as well as professional users seeking a powerful and space-saving woodturning lathe. Technical specifications: - Center height: approx. 178 mm (turning diameter approx. 355 mm over bed) - Distance between centers: approx. 450 mm (expandable) - Speed ranges: 60–1000 / 150–1900 / 350–3700 rpm - Motor: 1 HP / 0.7 kW – 230 V - Spindle thread: M33 x 3.5 (MT2) - Tailstock: MT2 with 100 mm quill travel - Forward and reverse operation - Heavy-duty construction, machine weight approx. 67 kg Condition: - Demonstration machine - Hardly any signs of use - Technically flawless Advantages: - Very compact, stable benchtop lathe - Ideal for precise turning work - Versatile due to rotatable headstock - Perfect for hobby and professional workshops The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, bench lathe, wood lathe, turning, turning tools, woodturning, machining, machine

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) Nodpfeun Swbsx Aaaecr 1/12th of the new price !!!!! Printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour, needs replacement of 60 heads (circa 45.000€) The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintenance done in May 2025. Available: January 2026 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, number of print heads: 12, input voltage: 400 V, Like new, only 300 operating hours. Viewing on site is possible by arrangement. Dip-Tech GP Series – Industrial Digital Printing Machine for Glass (Ceramic Printing) High-end digital printing system for architectural, automotive, and specialty glass The Dip-Tech GP Series is an industrial digital printing machine designed for direct ceramic printing on glass. Developed for heavy-duty production, it combines top print quality (720 DPI), high speed (up to 33 m²/h), and maximum flexibility for glass formats up to 2400 x 6000 mm (model-dependent). Nsdpfoypllcjx Aaaocr Thanks to the patented Drop-Fix system (air convection technology), the ink is optimally fixed, resulting in finer details, sharper lines, reduced gradients, and outstanding color brilliance. Technical highlights: ✔ 12 print heads / 720 DPI ✔ Production capacity up to 33 m²/h ✔ Glass thickness: 2–19 mm ✔ Glass sizes: 800 x 800 mm up to 2400 x 6000 mm ✔ Multicolor printing (up to 6 colors) ✔ Automatic maintenance ✔ Intuitive workflow software (DXP Advanced) ✔ Upgradable & expandable Fields of application: Architectural façades & large formats Spandrel glass Interior architecture (showers, partitions, furniture) Automotive & armored glass Yacht & specialty glazing Your benefits: Machine, inks & software from a single source Maximum color brilliance in ceramic glass printing

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Njdpoxn I Rwofx Aaaocr

Condition: new, Year of construction: 2025, This machine is based in Halver! YOUR competent partner for BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We will advise you individually - according to your wishes and look forward to your inquiry. The SGR-1000 model is characterized by the removed upper and lower segments. In addition, the bending beam is divided into segments. The foot lever for opening the upper bending beam is also mounted. - Segments of an upper and lower clamping iron expand the application possibilities, - Locking with the help of a pedal, hands are free and a sheet can be positioned freely, - Folding machine for universal use in repair and body shops, - Compact design, modern shape, - Manual folding machine for standard tasks, - Segments of an upper clamping iron expand the bending possibilities, Technical data: - Max. working width; 1000mm - Segments 30,40,50,60,70,100mm - Bending angle max. 160 degrees - Max. sheet thickness (steel) 1.5mm Nedpfov Nwybox Aaaocr - Weight 235 kg Possibility of mounting a guide rail for roller shears 300 EUR Accessory roller shears (up to 0.8mm) 350 EUR All prices are subject to 16% VAT. CE certificate Guarantee: 12 months. Pick up yourself Shipping within Germany 180€

Condition: used, Year of construction: 2005, Horizon booklet maker SPF-20 A FC-20 A offer consists of: - stitching and folding SPF-20A - frontcutter FC-20A Horizon SPF-20A stitcher and folder: - format adjustment: fully automatic - DIN-size and standard fold types: preassigned - saveable jobs: 12 memories for special sheet sizes + all DIN sheet sizes - stitching heads: 2 - expandable up to 4 stitching heads - stapling options: top-, side-, cornerstitiching Ncedpfsxyhngex Aaajr - ring eylete stitiching: with ring eyelet stitching heads possible - inlet format: max. 500x350mm; min. 180x120mm - processing strength: min. 2 pages; max. 22 pages (80g/sqm) - clip distance: min. 73mm - stitching wire: 26 - 28 - production speed: max. 3.600 cycles/h - power: 230V/50Hz - 0,45kW - dimensions: 2.710x810x1.070mm - weight: 490kg Horizon FC-20A fore-edge trimmer: - counter - faulty set ejection - booklet size: max. 250x20mm; min. 85mm - size front cut: max. 20mm - trimming thickness: min. 4 pages / max. 88 pages (80g/sqm) - production speed: max. 3.400 cycles/h - power: 230V/50Hz - 0,2kW - dimensions: 610x810x1.070mm - weight: 240kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2015, 2015 Cloos GLW 270 CNC Welder and Plasma Cutter with Robot CNC Control: Qirox C QRC 350, Welding source: Cloos Qineo Pulse 450, TIG Welding source: Cloos GLW 270, Plasma: Hypertherm HPR260XD, Basic parameters: diameter of processed ends from 500 to 5000 mm, end weight up to 5000 kg, diameter of processed pipes up to 1000 mm, length of processed pipes up to 3000 mm, pipe weight up to 500 kg, maximum cutting current of the plasma generator 230 A, maximum TIG welding current 270 A, maximum MAG welding current 450 A, Robotic station functionality: plasma cutting and chamfering of holes in bottoms with diameters ranging from 500 to 5000 mm, plasma cutting and chamfering of holes in shells with diameters ranging from 500 to 5000 mm (shell axis vertical), including at an angle to the vertical axis of the bottom, plasma cutting and chamfering of nozzles with a diameter of up to 1000 mm, welding of nozzles in bottoms with guaranteed penetration layers. The condition for obtaining proper penetration welds is proper preparation and assembly of the part – e.g., lack of end ovality (faulty material), even gap (incorrect assembly), etc. In the case of densely packed nozzles in the bottom, welds may be impossible due to lack of access with the welding torch. - welding of nozzles in shells, welding of tubes in tube sheets with diameters ranging from 500 to 5000 mm. The tubes in the tube sheets should be repeatedly secured and expanded. When welding tubes in tube sheets with diameters greater than 3000 mm, it will be necessary to rotate the tank several times. TIG process, MAG process, Maximum bottom thickness: 20 mm, Maximum jacket thickness: 12 mm, Station equipped with a filtration system, Station equipped with an automatic torch change system, Station equipped with a system enabling automatic joint position recognition, Station equipped with a vision system enabling process monitoring on a separate monitor with the option of connecting a plant recorder, Welding parameter recording and reading system, Manifold with a solenoid valve for shielding gas in the rotary table, Self-centering chuck in the 500-5000 range for the rotary table, Self-centering chuck for a vertical rotary table up to Ø600, S/No: 163 (2015) Njdpfx Aaey Dr Iheaocr

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor Nodsxhg Diopfx Aaajcr - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software Nodpfx Aajd Ih Hteaecr i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2006, HORIZON VAC-60Ha / Hm / Hc Collators The Horizon VAC-60 series (Ha, Hm, Hc) are modular air-suction collators designed for professional print finishing, offering precise, fast, and reliable sheet handling. Key Features Modular system: Each collator includes 6 feeding stations; expandable up to 6 towers (36 stations total). Advanced air-suction feeding: Ensures consistent and reliable sheet transport for a wide paper range. Flexible format range: Handles sheets from approx. 120 × 148 mm to 500 × 350 mm, with paper weights from 40–300 g/m². High-speed productivity: Processes up to 9,500–10,000 sets per hour, depending on setup. User-friendly operation: Models Ha and Hc feature “Touch & Work” technology for quick setup and control. Efficient integration: Model Hm serves as an expansion module without its own controls. Error prevention: Equipped with sensors for misfeed, double-feed, and jam detection. Job memory: Up to 9 programmable settings for recurring jobs. Technical Specifications Dimensions: approx. 842 × 652 × 1,961 mm Ncedpeylkw Ajfx Aaasr Weight: about 310–315 kg Power supply: 230V, 50/60Hz, 1.86 kW Loading height: 130 mm per station All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1999, Horizon booklet maker VAC-100 a VAC-100 m SPF-20 A FC-20 A offer consists of: - air suction collator VAC-100a - air suction collator VAC-100m - stitching and folding SPF-20A - frontcutter FC-20A Horizon VAC-100a / Horizon VAC-100m air-suction collators - technology: touch & work - model: air-suction collator - bins: 10 each collator - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/qm - loading height: 55mm/ bin - production speed: max. 9.500 cycles/h - power: 230V/50Hz - 1,86kW - dimensions: 842x652x1.961mm Ncedpoxxtyrjfx Aaaor - weight: 310kg Horizon SPF-20A stitcher and folder: - format adjustment: fully automatic - DIN-size and standard fold types: preassigned - saveable jobs: 12 memories for special sheet sizes + all DIN sheet sizes - stitching heads: 2 - expandable up to 4 stitching heads - stapling options: top-, side-, cornerstitiching - ring eylete stitiching: with ring eyelet stitching heads possible - inlet format: max. 500x350mm; min. 180x120mm - processing strength: min. 2 pages; max. 22 pages (80g/sqm) - clip distance: min. 73mm - stitching wire: 26 - 28 - production speed: max. 3.600 cycles/h - power: 230V/50Hz - 0,45kW - dimensions: 2.710x810x1.070mm - weight: 490kg Horizon FC-20A fore-edge trimmer: - counter - faulty set ejection - booklet size: max. 250x20mm; min. 85mm - size front cut: max. 20mm - trimming thickness: min. 4 pages / max. 88 pages (80g/sqm) - production speed: max. 3.400 cycles/h - power: 230V/50Hz - 0,2kW - dimensions: 610x810x1.070mm - weight: 240kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs