Used Accumulation Table For Bottling Or Canning Line for sale (52,280)

Condition: used, Year of construction: 2009, Manufacturer : VDI Type: Accumulation table Year : 2009 Automatic unit counting / detection system. Belt width : 20 cm Plate size : 80 x 120 cm Bjdjx R A Npepfx Aa Ijwu    

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Bwjdpfxjrq Eaws Aa Isu

Condition: new, Year of construction: 2026, Engine power: 10 HP Splitting force: 20 tons KH1100F diesel engine Starting: pull starter and key Max. operating pressure: 22 MPa 4" cylinder Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 5 s Return time: 3 s 4-arm splitting wedge OREGON 20" guide bar Chain: 74 links, 0.375 Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3175 mm Conveyor belt (outfeed belt): 6800 x 250 x 4 mm Engine oil: 1.5 L (10W30/10W40) Hydraulic oil: 32 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (L x W x H) 2200 x 1000 x 1200 mm Machine dimensions (L x W x H) 6400 x 1400 x 2200 mm Weight 1151 kg Bwjdpfxszx Apie Aa Ieu Features Crawler drive – self-propelled design allows for operation in difficult terrain. Combustion engine – complete independence from electrical power. Splitting force of 20 tons – effective splitting of even hard wood. Hydraulic feed and pressure – faster and more convenient operation. Hydraulic cutting and splitting – high efficiency of the entire process. Maximum wood diameter of 500 mm – allows for processing large logs. Sturdy construction – suitable for intensive use. Mobility – easy access to the job site without the need to transport wood.

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. Bwedpfxeuxmt Te Aa Iou As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Bodpfx Aaoyzxyxs Iswu Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Bedpfexugf Hox Aa Iswu Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, JORNS NORMA - LINE 125 SW | Swivel bending machine | 6.4 meters working length, 1.25 mm bending capacity. Bwjdeznc Ahopfx Aa Iou

Condition: used, mileage: 54,858 km, power: 96 kW (130.52 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Errors and prior sale reserved! Internal number: 1089. MR79656 ----EQUIPMENT * Trailer hitch, fixed - 13-pin including trailer stabilization (TSC - Trailer Sway Control) * Omission: Vinyl floor covering "Easy Clean" * LED lights in the cargo area * Package: Service Line - Sobogrip mounting floor - Sowaflex wall paneling - Shelving systems (left and right) - Compartments with various boxes - Drawers - Cargo fixation including impact protection - Floor rail - Gas bottle holder - Aluminum perforated sheet - Multi-console - Workbench, foldable, including parallel vice 120 and rotary table - Floor fan - Roof fan - Partition (plastic) * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake force distribution (EBD) * Airbag, driver's side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, medium * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic stability and safety program (ESP) with traction control (TCS) - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection * Power windows, front - with quick-down/-up function for driver's side * Ford Easy Fuel - Convenient fuel filler cap and misfueling protection * Cruise control including leather steering wheel - Steering wheel with audio remote control (operation of the audio system and the on-board computer) * Glove compartment with lockable lid * Interior lighting with delay function with reading lights in the front * Air conditioning, front including dust and pollen filter * Paint: Solid color * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency brake assist including hazard warning lights * Park Pilot system, front and rear * Particulate filter: Diesel particulate filter * Radio: Audio system 13 - Radio (FM/AM) - DAB/DAB+ - MyFord Dock - FordPass Connect - Four speakers, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB connection - Hands-free system * Headlights with static cornering lights * Sliding door entry light automatically when the door is opened * Sliding door: Sliding door, right * Rear mud flaps * Side protection strips * Side wall paneling up to the roof * Power steering * Seat belts - Seat belt pretensioners and force limiters in the front - Warning system for unfastened driver's seat belt * Seats: Seat package 13 - Driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Tray integrated into the double passenger seat (foldable) - Interior armrest for the driver - Lumbar support, manual (driver's seat) - Seat upholstery: Fabric * Start-stop system * Daytime running lights * Partition (plastic) at the height of the B-pillar * Rear bumper with integrated step * Tie-down points * Immobilizer * Heat-reflecting tinted glass * Central locking with remote control * Overhead storage compartment in the front ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale reserved. Bwedpfxjz Amtyj Aa Iju We will gladly take your vehicle in trade. Financing / Leasing al

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Bwodpfeymzzuox Aa Iju Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS Bsdpfxeymzxyj Aa Iswu WIDTH: 450 mm

Condition: refurbished (used), ROLLFORMING LINE Bwodpfxjg Rkv Eo Aa Iju

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm Bwjdpfjy Rxzhox Aa Iou FULL OVERHAUL

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Bwodpfxowkdt No Aa Iou The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) Bedpjnzhxqofx Aa Iowu 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: ready for operation (used), * Model: rolls for rollertables * Rolls with size: 500mm x 89mm * Type: SW 14 * Price : €11 a piece Bwsdpfxeywmfhe Aa Ieu * Stock: 2200 pieces.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: MZsmcs01, type of input current: three-phase, Equipment: CE marking, Automatic Sterile Vial Filling Machine Bwjdpfx Ajx Ancioa Iou A compact automatic solution for precise filling and capping of sterile liquids in small vials. The machine provides stable, accurate and hygienic operation for pharmaceutical and laboratory applications.

Year of construction: 1989, condition: used, Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible. Bsdpfez Ekc Ijx Aa Iowu

Condition: good (used), Year of construction: 2007, Eckold tool ECKOLD - FWR1307X Stretching tool for MAX. 6 mm MACH-ID 3811 Make: ECKOLD Bwjdpfx Aaezdgb Ie Ieu Type: FWR1307X Stretching tool for MAX. 6 mm Year: 2007 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), * Model: rolls for rollertables * On stock: 2 types-sizes. * 1x Type: SW 8 * Rolls with size: 250mm x 40 mm Bwjdpfx Asywmqdea Isu * Price: €2,50 a piece. * Stock: 5000 pieces. * 1x Type: SW 8 * Rolls with size: 315mm x 63,5 mm * Price: €3,50 a piece. * Stock: 5000 pieces.

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Bwjdpfxexwc Eus Aa Isu Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Bwedpfxjy T N Tto Aa Iou

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Bodpez Ehgwsfx Aa Ijwu Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT

Year of construction: 2020, condition: used, functionality: fully functional, Nine locking frames for a Bobst 162 CER, available at a bargain price. Bjdpfx Aajy U Itue Iswu

Condition: excellent (used), functionality: fully functional, REF: MM6320 1 x Bertuetti conical rounder with automatic flour duster for pieces of dough. Conical rounders work by using a rotating cone and fixed rounding channels (or troughs) to shape the dough pieces into a smooth, round ball. This process helps create an optimal shape and structure for the final product. Bwedpsx I Sp Hofx Aa Isu Manufacturer - Bertuetti. Speed - Variable. Previously used for pieces of dough weighing between 80g-800g. Electrical requirements - 3 phase.

Condition: ready for operation (used), Straight filling line Suitable for cans and jars Shower filler for brine, oil etc. Bjdpsy A Tkzsfx Aa Iewu