Used 4 Side Sizing-Milling & Edge Banding for sale (80,986)

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Rjdpfoy I Rf Hsx Aquju Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Redpfx Aswkba Tjquou Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Redpfx Aqswka S Isuju Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions Rodpfx Aobhfzboqueu

Condition: used, Used mesh container in euro size 1200 x 1000 mm. This gitterbox has four tight mesh walls and a steel profiled bottom. Rsdpfx Ajizaxvsqusu The frame and mesh are painted for a robust exterior. The mesh box stands on a sturdy steel frame with four legs making it easy to pick up the gitterbox with forklift and pallet truck. The top has a raised

Condition: used, Used mesh container / mesh box 1000x800 mm – stackable steel container with four walls This used mesh container (mesh box) measuring 1000x800 mm is a robust and versatile solution for storing and transporting goods in industrial and logistics environments. Rsdpfoy Hpxpex Aqueu Thanks to its sturdy construction and practical design, this steel mesh

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with a rolling block chain (instead of standard chain), extended mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Rjdpfxewvlhlj Aqueu Comprises: Edgebanding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / infeed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Redpfxoy Eizzo Aqueu Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works Redpfey Nk R Eox Aqueu N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels)

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Rsdpfx Aewtfvkjqueu Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: used, Technical details: voltage: 380 V Rsdpou Ngfdjfx Aqueu total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: excellent (used), Year of construction: 2001, Ott Atlantic V/12 edge banding machine Joining unit snipping, 2 x routing, radius scraper, surface scraper Rodpotdz Tqofx Aquou Edge thickness: 0.2 - 12 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 2001 price 10000

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KASTOtec AC 4 Cutting Capacity Round: 430 mm Cutting Capacity Square H x W: 430 x 430 mm Cutting Capacity Flat H x W: 430 x 430 mm Clamping Range: 0 – 430 mm Smallest Workpiece Dimension: 10 x 10 mm Minimum Cut-off Length: 6 mm Shortest Remainder Length in Automatic Operation (only for geometrically flawless surfaces): 35 mm Shortest Remainder Length in Single Cut: 10 mm Dimensions and Weights: Length approx.: 2,140 mm Width incl. chip conveyor: 4,610 mm Height (saw frame lowered) approx.: 2,195 mm Height (saw frame at highest position) approx.: 2,410 mm Material Support Height: 700 mm Total Weight: 4,300 kg Year of Manufacture: 2003 Performance Data: Total Connected Load: 25 kW Saw Motor Power: 15 kW Drive Power at Flywheel: 14 kW Cutting Speed—stepless, 50/60 Hz version: 12 - 120 m/min Automatic Material Feed Length Single: 600 mm Saw Blade Dimensions: 6,830 x 41 x 1.3 mm Coolant Tank Capacity: 150 l KASTOtec AC 4 Fully hydraulic high-performance band saw in heavy-duty design Suitable for cutting round, square, flat material as well as tubes and profiles in all grades, especially for tool steels and difficult-to-machine materials such as titanium, Hastelloy, Inconel, etc. Machine Base Torsion-resistant welded construction Saw Unit of steel-mineral composite construction Saw Unit Guidance High-performance sawing technology requires backlash-free and low-maintenance guidance systems. Two vertical square guide columns, one linear guide unit with backlash-free set carriages, as well as two preloaded and adjustable rollers on a guide rail ensure high rigidity and cutting accuracy. Greater machining performance, shorter cutting times, higher blade life, and maintenance-free guide systems with high availability characterize the new KASTOtec. Saw Blade Guidance Side guides by hydraulically preloaded carbide slide guides with quick lift feature for fast blade changes. Back guide by oscillating carbide slide guides. Automatic adjustment of the movable blade guide according to the width of the material to be cut. Material Lift Device After cutting in automatic cycle, the workpiece is moved approx. 2 mm away from the blade on the feed side using the material lift device while clamped (increases blade life). Options for the Machine - Carbide package - Coolant monitoring - Blade tracking - Speed monitoring - Machine lamp - Roller conveyor - CNC control - Special chip conveyor - Carbide package Discharge Roller Conveyor for the KASTOtec AC 4 available in stock, dimensions: 1200 mm long, 500 mm support width, 6 transport rollers Redpfx Ajy Dckmoquou

Condition: new, Year of construction: 2025, Pre-milling unit: yes Rsdpfxsl D Rx Uo Aquou Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Rsdpfx Aow Dm Hrequou

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Rjdpfx Aob A Igpoquou -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available -Price: per piece -Weight: 6 kg/piece

Condition: used, Number of spindles 6 St. Working width 240 mm Rodpfjyhxmuox Aqusu Working height 120 mm Dimensions (L/W/H) 4900 x 1700 x 1700 mm weight of the machine ca. 3500 kg Control CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Rjdpfx Asyq S Duoqueu Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ----- technical details short summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: ----- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactured in 1985, in a production line and workpiece return conveyor. Price 4.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 2004, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edgebander / edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Joint milling unit Gluing unit Quickmelt Combination milling unit for flush milling, chamfer milling, radius milling Trimming unit automatically adjustable from chamfer trimming to straight trimming via program Rounding unit (front side) Profile scraper unit / Rounding scraper unit Surface scraper unit Buffing unit for polishing edges Release agent spray system Special equipment: Hot-air system Schugoma HDL3020 (retrofitted) Hot-air process for processing laser edges (co-extruded edge) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Rsdpfsy Df N Ssx Aquou Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 x 2 Stator blades: 2 Rodpfeyr Tvnox Aquju Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Rsdpfx Aoyr Tuksquju Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Redpfx Aeyr Ttyequsu Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rsdpfx Aoyr Tk Sequsu Rotor width: 140 mm 10 rotor knives 2 rows of stator knives Cross section approx. 250 x 300 mm Drive: 5.5 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The GSL series granulators 300/400 to 300/800 are primarily designed for the size reduction of production scrap in injection molding and blow molding applications. In addition to the key benefits of the GSL series, the slow-running granulators GSL 300/400, GSL 300/600, and GSL 300/800 are especially suitable for large-surface parts such as automotive door panels, bumpers, or hollow bodies. The 'V arrangement' of the rotor knives ensures that the pre-shredded material is held in the center of the rotor. This significantly reduces wear on the grinding chamber walls during processing of glass fiber reinforced plastics. Material build-up on the side walls is prevented. Thanks to the staggered arrangement of the rotor discs, only individual knives are engaged at any one time, providing consistently higher cutting force. Redpfjyr I Eksx Aqusu

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been designed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be resharpened multiple times. Material is fed via a noise-insulated, sandwich-construction feed hopper, which is available in various designs depending on the type of material handling. Depending on the application, the granulators of this series are mounted on either a low or high frame and equipped with an appropriate suction/extraction tray. Combined with a wide range of options, these granulators offer highly flexible use. Rjdpfoyr I Edsx Aquju In addition to the typical advantages of all slow-speed granulators, such as low noise emissions and virtually dust-free regrind, the granulators GSL 180/120 to GSL 180/430 are distinguished above all by their knife, rotor, quick-snap system, and excellent accessibility.