Used Ventilation Roll Forming Machine for sale (71,735)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft Hedpfx Aotzlzaegcsnk working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Hnjdouct Ivjpfx Agcjk Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use

Condition: used, Year of construction: 2011, sheet width 1270 mm plate thickness max. 4,5 mm 4 mm roll diameter 120 mm roll speed 8 U/min min. bending diameter 180 mm total power requirement 2,2 kW Hodpfxsyv Nq Re Agcenk weight of the machine ca. 1250 kg dimensions 2470 x 750 x 1000 mm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: Hnodpfxsyvvrhs Agcsk - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg Hnodpfjyvvrbox Agcsk dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm Hsdpfeyvvpyex Agcenk plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Hjdpfeyzim Aox Agcsnk Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), total length: 5,000 mm, film width: 550 mm, product height (max.): 150 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular film, comprising film wrapping machine and downstream shrink tunnel. The intermittent motion tubular bag machine Flexo 500 impresses with its outstanding versatility and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household products, this machine equips you to handle any application quickly and efficiently, ideal for daily changing production orders. - Film Wrapper Hugo Beck Flexo 500 S, Year of manufacture: 2003 Workpiece dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 150 mm Length: from min. approx. 80 mm, theoretically unlimited Consumables/Film: Center-folded (half-tube) film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3 phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, Year of manufacture: 2002 Working width: approx. 600 mm Pass-through height: approx. 300 mm Feed rate continuously adjustable Chain rod transport, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3 phase Rated current: 19 A Connected load: approx. 12 kW Hnjdpfoyw H Rkox Agcek Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, roller diameter: 180 mm, roller length: 1,570 mm, working width: 1,570 mm, sheet thickness steel (max.): 9 mm, input voltage: 400 V, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, – Capacity 2070 × 9 mm (minimum diameter 900 mm) 2070 × 7 mm (minimum diameter 270 mm) Bending capacity 2070 × 7 mm (minimum diameter 900 mm) Bending capacity 2070 × 5 mm (minimum diameter 270 mm) – 4 rolls – Hydraulic operation – Hardened rolls – Top roll diameter: 180 mm – Bottom roll diameter: 180 mm – Side roll diameter: 150 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction made of ST-52 – Hydraulic drop-end system for easy positioning of the rolls – Hydraulic lifting and lowering system for center and side rolls – Hydraulic balancing system – Overload protection – Documentation Hodpfx Agjx Hq Dyeconk – 400V

Condition: ready for operation (used), Year of construction: 1995, Thread Rolling Machine Flat Die TLM RP8 Operational, fully functional Available for any tests c/o H.B.R. srl Ready for immediate delivery. TLM RP8 Informazioni tecniche: Year: 1995 Diameter range: 3 – 8 mm. Hedpfxsyzqzbj Agcenk Shaft length under head: 90 mm. Max. thread length: 52 mm. Dies size:130/115x54 mm. Speed: 420 pcs./min. Vibratory feeder Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Available c/o H.B.R. srl - Italia

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Hodeu Tg Spepfx Agcjnk Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Hnedsyxratspfx Agcjk

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 3 mm, - Capacity 1070 x 3 mm Hnjdpfxji E Tzqe Agcjk - Roll diameter 90 mm - Electrically adjustable trailing roller - Digital display - Hardened rollers - Possibility for conical rolling - Rotatable upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Hnedpfx Ajyvqc Uegcjk

Condition: excellent (used), Year of construction: 2014, sheet width 2600 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight ca. 5000 kg Dimensions (only the machine) ca. 3500 x 1550 x 1400 mm very good condition (!!) current new price incl. accessories approx. 120.000 Euro special price on request Equipment: - robust electro-hydraulic 4-roll round bending machine - 4-roll concept offers a wide range of bending and rounding options - Swivel-mounted control unit * Operation - control of all rollers or machine axes * Digital position display of the side rollers * Manual operation via JOY sticks - Two central rollers are driven directly via hydraulic motors - Conical rolling possible by tilting the rollers - Parallelism of the side rollers via torsion shafts - Bending on both sides - diameters of up to 1.1 times the top roller diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal Hnodpfoylpz Hjx Agcek - pressure gauge / pressure display for the rollers - Safety device (safety line with switch unit) - operating instructions * Special accessories included : - ROCCI height-adjustable center support * for large pipe diameters - ROCCI electro-motorized material feed table * motorized sheet feeding material support surface

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 229, total width: 500 mm, total length: 600 mm, total height: 1,200 mm, number of straightening rollers: 5, Profile rolling machine: Rolling - Bending - Straightening / Profile dimensions as per attachment (see photo) Hjdpfxjxrflme Agcenk

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller Hedexaciljpfx Agcjnk pairs - Adjustable upper shaft

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts Hnodpfsxachzex Agcsk - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever Hodpfxjxacbue Agconk - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Hnodpfxoxaaf Rj Agcok Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm Hodsxaafdopfx Agcjnk roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, total length: 3,100 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. Hsdsydk D Hepfx Agcenk New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, roller (top) diameter: 160 mm, working width: 1,050 mm, sheet thickness (max.): 10 mm, Epart Motorized Cylinder 1050 x 10 mm Brand: Epart Type: Motorized Capacity: 1050mm x 10mm Upper roller diameter: 160mm Motorized rear roller Hnsdpfx Agjvlxyzscek Roller extension to mount rollers Pedal operated Perimeter security by limit switch Front roller separation by steering wheel

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) Hjdjxacfgspfx Agconk * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Hedpsxacdpjfx Agcjnk Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)