Used Uzma Hsb 3006 for sale (192)

Condition: ready for operation (used), Siemens 1FT7034-1AK71-1CH1 synchronous motor, encoder AM24DQI / brake 24VDC 6.8W 3503650. Serial number: YFD540446103006, used, in good condition, fully functional. Scope of delivery as per photos. Bsdpfox Duxysx Ac Tswt

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Bedpfx Acjvptt Ro Towt Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: new, sheet length: 3035sheet thickness: 6,0total power requirements: 11weight approx.: 8,3messurements (LxWxH): 3775x2955x2260 Bsdpfed Egq Asx Ac Tswt

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AG1 synchronous servomotor SN: YFE8610615303006, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please request price separately! Bjdoy R Iukjpfx Ac Tewt

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Bwodpfxswx Dcte Ac Tst Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: ready for operation (used), Yaskawa UAASKB-08CHSB1 AC spindle motor, serial number as per photo, mounting hole spacing: 210 x 255 mm, drive shaft Ø: 48 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos ATTENTION: Please enquire separately for packaging and shipping costs! Bwodpfx Ajx Dwl Aec Tst

Condition: new, Year of construction: 2026, functionality: not functional, input voltage: 420 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 6,680 mm, number of axes: 9, number of slots in tool magazine: 15, total height: 4,100 mm, total length: 7,920 mm, total width: 9,000 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, WatMachinery NHSB 3517 5-AXIS is a fully automated stone-processing production system engineered as a self-contained manufacturing cell. It integrates loading, multi-technology cutting, automatic part transfer, contouring, and finishing into one controlled process chain. By automating workpiece transport and positioning and executing machining operations in sequence, the NHSB 3517 increases throughput, improves repeatability, and reduces variability associated with manual handling and operator-dependent setups—delivering consistent quality shift after shift. Built on a compact platform that combines a 5-axis sawjet and a 5-axis CNC contouring center, the machine supports diamond blade cutting for high-productivity straight and profile cuts, an independent 5-axis waterjet for internal geometries and tight radii, and hybrid strategies that use both technologies for optimized edge quality and process stability. The production cycle begins with ergonomic slab loading via a tilting table, followed by material alignment including vein-oriented positioning for visual matching. Primary cutting and separation are performed with automatic selection of blade, waterjet, or combined cutting. Parts are then transferred through an automated handling sequence using a vacuum manipulator system with eight vacuum cups (lifting capacity up to 500 kg / 1,100 lbs), enabling safe and stable slab and workpiece manipulation. A dedicated finishing workflow completes the process with automatic positioning on suction-cup fixtures, followed by unloading without manual intervention. The 5-axis head assembly is configured for multi-operation processing and includes a diamond cutting spindle, an independent 5-axis waterjet head, and multi-head edge-finishing units for efficient flat-edge polishing, supported by vacuum handling plates for secure, repeatable part manipulation. An integrated slab washing apparatus cleans the surface before vacuum operations to improve grip reliability and positioning stability. The machine can be supplied with an on-board camera (accuracy ±5 mm) to capture slab images for software-based nesting and defect avoidance, and probing systems such as a laser probe and stone perimeter probing to enhance dimensional accuracy and alignment. Bodpoylkf Tefx Ac Tjwt The industrial CNC controller features an operator-friendly HMI, supports DXF import and G-code execution, and also provides a manual mode for quick operations and simple cuts. Designed for manufacturers producing countertops, bathroom elements, stairs, and architectural stone components, the NHSB 3517 5-AXIS delivers higher automation, reduced manual labor dependency, and measurable gains in productivity and process consistency.

Condition: ready for operation (used), Siemens 1FT5066-0AF01 - Z Permanent magnet motor SN:E7A91554703006 , Z= G45: holding brake installed EBD 0,8 M 24V - 18W ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bsdpfx Ajvgpm Ioc Towt

Condition: excellent (used), Year of construction: 2000, operating hours: 84,840 h, clamping force: 1,300 kN, screw diameter: 50 mm, injection pressure: 2,080 bar, injection weight: 297 g, Arburg 420C-1300-675 (167) Product Code: 167 Availability: In Stock Year of production: 2000 Brand: Arburg Technical data Shot Weight: 297 g Clamping Force: 1,300 kN Screw dia: 50 mm Bwjdpovt Rvqefx Ac Tot Injection pressure: 2080 bar Tie bar distance: 420 x 420 mm Platen size: 615 x 615 mm Mould height min.: 350 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 84840 h Weight: 4330 kg Dimensions: 4,9 x 1,8 m Hopper: No Core pull: Yes Air valve: Yes Robot slot: Yes

Condition: new, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, suspension: air, tire size: 275/70R22,5, Equipment: ABS, | Schwarzmüller Jumbo building materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel tool box, | Rear storage compartment 600x400x2.900 | side wall height 1.00m front wall height: 1.40m | loading dimensions: 7.10mx2.48m | aluminum rims XLite | tires 275/70R22.5 twin tires | plastic tarpaulin with rubber bands, | aluminum storage tray and front step bar, | subject to errors, input errors and prior sale. Bodpfx Acjtuwbps Tewt

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades: Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm Bwedjxf Dpkjpfx Ac Tst -Total weight: 57 kg

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: B SN: EA6813006 , the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Bwjdpjnkqytjfx Ac Tst

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Bwedpfsyz E T Sox Ac Tjt Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, Oil tank capacity: 12Bending capacity: (Flaches Material) 200 x 12Bending capacity: (Runde Rohre) 48 x 4,0pressure: 20working speed: 10Return speed: 10motor: 2.2table area: 480 x 1060working height: 930length: 1150width: 480heigth: 1200stroke: 185weight approx.: 530 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Bjdpfx Ajr I H A Aoc Towt Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Year of construction: 2023, condition: new, functionality: fully functional, Equipment: compressed air system, compressor, FIAC AB 300 - 678 Bedpfxeu Dxu Hj Ac Towt - Oversized model, Very competitive pricing. - Several available from stock. Specifications: Tank: 270L Compressor capacity: 650 L/min Bar: 10 bar KW: 4 Pump type: AB 678 2/2 RPM: 1000 Code: 1121560311 EAN: 8020119109861 dimensions: 1600x560x1040 mm LxWxH

Condition: new, pressure: 100Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 24Bending capacity: (Runde Rohre) 114 x 10pressure: 285working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, Bjdpsr I H Axjfx Ac Tewt straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 15Bending capacity: (Runde Rohre) 114 x 8pressure: 80working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to Bodper I H Dcsfx Ac Tewt perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: good (used), mileage: 22,521 km, power: 70 kW (95.17 HP), first registration: 12/2020, fuel type: electric, tire size: 245/55R17, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: electricity, color: red, driver cabin: day cab, gearing type: automatic, number of seats: 6, total length: 5,250 mm, total width: 1,900 mm, total height: 1,950 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rearview camera - Lane keeping assist - Blind spot sensor = Notes = Configuration: 4x2, Tare weight: 2535 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 4, Auxiliary heater, Rear window wiper, Parking assist: Front and rear, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Metallic, Rearview camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 70 kW (94 hp), Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Seats: 6, Seat upholstery: Leather, Seat adjustment: Manual, 6-seater + tablet, Pano Navi L2 AVANTGARDE Night, Distronic, 360 Camera, Navi, Panoramic roof, Blank, CarPlay/Android!, Spare wheel, Tire type: Summer tires = Additional Information = General Information Number of doors: 2 License plate: JPH-23-F Axle Configuration Tire size: 245/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,535 kg Payload: 965 kg GVW: 3,500 kg Bwedjxryk Djpfx Ac Tjt Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 528 € per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 40working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to Bsdpfor I H A Rox Ac Tswt perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 2730 x 27 x 0x9speed of the tape: 35/70cutting area - round: 230cutting area - square: 230cutting area rectangle: 320 x 130messurements (LxWxH): 1350 x 770 x 1300working height: 760coolant pumpmotor: 0.12weight approx.: 525cutting area 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160Cutting area 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100Cutting area -45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100motor: 1.3 UZMA 230DG  Hydraulic Bow  Double Mitre  Head  Heavy duty Structural steel machine. Standard Accessories: - M42 Bi-metal saw blade - Variable speed - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Manual  vice - Hydraulic  Bow  Bedpjrzx Dlofx Ac Towt - Blade tension Device - Pendant control - Mitre Head 2 directions  - Heavy Duty Gear Box

Year of construction: 2020, operating hours: 20 h, condition: as good as new (ex-display), The mobile Kreuzmayr units are used for the processing of fruit juices on site. The fruit is loaded into the washing container with the bin tipper, transported to the grinder, crushed and then conducted to the sieve belt press. The generated juice is automatically pumped into tanks, heated to about 80° C in the pasteurizer, and then filled into Bag in Box. Bwedec Rghyepfx Ac Tot The following machines are built on the trailer: • Bin Tipper Kreuzmayr GKE • Wasching and Crushing Unit KWEM 2000 • Single Belt Press KEB 750 with cleaning brush • Bigger juice pan for the KEB 750 • Pomance conveyor • Stainless steel tank 530 Liter with hanging sieve • Pasteurizer Kreuzmayr PAS 1500 Liter oil • Bag in Box filler Kreuzmayr KBF 2000 special construction for mobile trailer • Accessories: like pumps, air compressor, high pressure cleaner, hoses and fittings • Trailer with canvas cover, pneumatic brake system and antilocking system The trailer has only a few operating days and is thus in a new condition.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1800x1400 mm Weight 2500 kg Total power requirement 37 kw Bodpfevz Hrwex Ac Tswt

Condition: used, Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Bwsdpfx Acek Abg Do Tjt Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, functionality: fully functional, Year of construction: 2024, control type: CNC control, controller manufacturer: Durma, controller model: DT-5, stroke rate (min.): 14 1/min, sheet thickness (max.): 6 mm, back gauge: 1,020 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, ES3006 in stock - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 - CNC back gauge: 1000 mm Bedswtl Awopfx Ac Towt - Cutting length limitation - Easy operation - Retraction - Pneumatic sheet holder

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings Bodpfx Acorp Dyrj Towt compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website