Used Uni-Kat Sp. Z O.o. Rotakat 3D for sale (34,498)

Condition: new, Schunk KSH 100-Z 2-jaw power clamping block, max. operating pressure 60 bar, unused in opened original packaging, 100% functional, scope of delivery as per photos. Pgjdpfxox Eucwe Ampsk

Condition: new, Schunk KSP100-Z tandem power clamping block 400211 9bar, unused in original packaging, 100% functional, delivery as shown in photos Pgsdpfox Euc Djx Ampek

Condition: ready for operation (used), Eurotherm PV-X SP-W processor, used, in good condition, 100% functional, scope of delivery as per photos. Pgsdpfx Amex Eq Rdspsk

Condition: ready for operation (used), Siemens 1PH5131-4CG40 - main spindle motor SN:E9L81781311005 with 2CW8166-8 blower, Z= K02: vibration level / stage S with single bearing, K20: bearing design / reinforced bearings (FT series), K10: terminal box / terminal box or power connector NDE right, used, normal signs of use, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Pgjdpfx Aex Dvt Esmpek

Condition: ready for operation (used), Siemens 1PH6-206-4NE46-Z main spindle motor, serial number as per photo, used, showing normal signs of wear, 100% fully functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for costs of packing and shipping! Pjdpjx Dvv Hofx Ampogk

Condition: ready for operation (used), SEW RF73 DT90L-12-2BM/Z Gear motor , serial no. according to photo , used, normal signs of wear, 100% functional , hole spacing of mounting holes: 150 x 150 mm, Ø drive shaft: 40 mm ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Podpfei D N Nwex Ampsgk

Condition: new, Siemens 1PH4135-4EF26-Z spindle motor, Z= see nameplate SN:YFW2311630701001, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping charges! Pjdpfx Asx Dvtlempjgk

Condition: ready for operation (used), Siemens 1PH6137-4CF49 - Z main spindle motor SN:E1W92229001001, Z= see nameplate, used, shows normal signs of use, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Pgedpox Dvvgefx Ampsk

Condition: new, Siemens 1FT6086-8AF71-1EH1-Z servo motor with gear SP140S-MF1, serial number as per photo, unused, 100% functional, scope of delivery as per photos Psdpfewd Av Njx Ampogk

Condition: new, Siemens 1LE1043-0DB33-3GA4-Z low voltage motor SN UD1904/2131027-002, unused in opened original packaging, 100% functional, delivery scope as per photos. Pedpfx Aex Dvr Uempogk

Condition: ready for operation (used), Siemens 1PH6137-4CZ09 - Z spindle motor SN: EC584962701009 with 2CW8366-8 blower, Z= G51: prepared for encoder system, K02: grade S for single bearing mounting, K31: second end shield loose in terminal box, used, normal signs of use, 100% fully functional, delivery as per photos. ATTENTION: Please enquire for charges for packing and shipping separately! Pgodsx Dvvmepfx Ampok

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Pgodpfsw N Iz Hjx Ampok Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: used, maximum load weight: 16,700 kg, overall weight: 22,000 kg, axle configuration: 3 axles, first registration: 05/1964, next inspection (TÜV): 02/2026, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 1,060 mm, total width: 2,500 mm, * Bunge 3- Achs Tieflader mit Radmulden * Typ TL 16 Z * 22000 kg GG * 40 ziger Zugöse * Zuggabel verlängerbar * Zuggaabl mit Federunterstützung * Duomatik * BPW Achsen * Manuelle Auffahrrampen * Rampen ca. 1,75 m L x 0,58 m B * Radmulde vorne ca 2 m Lang + schräge 1,15 m * Radmulde ca. 0,88 m H * Staumulde * Vorrüstung für Rundumlicht * LED Beleuchtung * Warntaffeln * Federung: Blatt/Blatt/Blatt * Reifen 7.50R15 ca. 70-60-60% * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, Pgodpfow Nz Ugjx Ampok * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t Pjdpfx Amstqqq Ropjgk dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Pgodpfxoxp U R Hj Ampsk

Condition: refurbished (used), Year of construction: 2018, operating hours: 16,376 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,671 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, fully maintained, tested, and reconditioned by us according to FEM-4.004 (UVV) standards. • Over 350 units in stock • Custom modifications of any kind possible upon customer request • International transport with suitable vehicles and customs processing upon request • See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise • Full functionality as per FEM-4.004 • Inspected & tested (C5 test) batteries in electric equipment (minimum 70% capacity) Pedjwzudyepfx Ampegk

Condition: used, empty load weight: 7,630 kg, maximum load weight: 12,870 kg, overall weight: 20,500 kg, axle configuration: 1 axle, first registration: 12/1998, loading space length: 10,700 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, suspension: air, tire size: 275 / 70 R 22,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 1-axle, SAF axles, air suspension, last axle forced steering, lifting+lowering, ABS (anti-lock braking system), twin tires, aluminium tail lift, upright, diesel/electric refrigeration unit. Pgjdpfei Rm Izox Ampsk Body: Carrier Genesis TR100 and LBW BÄR 2000kg lifting capacity ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis Podpfxjwxvl Tj Ampsgk FSCUT 9200 system HL-20000 water chiller Yaskawa servomotor Optional: air compressor

Condition: used, maximum load weight: 23,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, NXT Recovery 31 NEW VEHICLE COC to GSS via TNT 05.04.2024 ATTENTION! VEHICLE REQUIRES POWER ON PIN9 FOR THE CONTROL BLOCK Rotating beacon on the rear of the vehicle, E start & stop device, work lights on the rear of the vehicle, 4x side over-width panels and 4 damp room sockets, radio remote control hydraulic winch on the gooseneck 6700kg hot-dip galvanized, 3 air-sprung BPW axles, 3rd axle steerable, frame 2500mm hydraulically telescopic with locking every 500mm, rear overhang hydraulically lowerable, middle track hydraulically adjustable ATTENTION! VEHICLE REQUIRES POWER ON PIN9 FOR THE CONTROL BLOCK Psdpfevm Indsx Ampogk

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Pedpfoxx A Ekjx Ampegk Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Podpfxexcvzas Ampegk Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Pgjdpfx Amexcgihopok Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: Pgjdpfx Amsirmgfepjk High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, Year of construction: 2026, Technical data: Podpfjtz Sgiex Ampsgk Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Model - iSpot. Pedpfx Ameyv E Ryspogk Serial number - ISP103177-001-01. Date of manufacture - 2021. Depositing range - adjustable. Speed - adjustable, up to 60 deposits / minute depending on volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.