Used Tour À Polir / Polisseuse Entre-Pointes 1500 Mm for sale (111,731)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Fpodpomhhx Iefx Aivsn - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We offer you a used impact protection barrier for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Included in the scope of delivery: 01 x Impact protection barrier, used Fpjdjdz Uxqspfx Aivsn Material color: yellow Overall length: approx. 2,455 mm Overall length without base plate: approx. 2,400 mm Suitable for a double rack row Overall depth: approx. 150 mm Overall height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pieces Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions Fedpfx Aiouba Rbjvjpn

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2.370 kg. range L-W-H 2.840 x 1.150 x 1.460 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE Fpsdpfx Aoxaam Ioivjn - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: good (used), Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow-ground gear Fsdpfjwzudgex Aivjpn -Gear: Spur gear with hollow grinding, 63 teeth -Bore: Ø 40 x 45 mm -Dimensions: see photos -Overall dimensions: Ø 134 x 60 mm -Weight: 1.8 kg

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg Fpjdpfx Aoyupd Hoiven

Condition: ready for operation (used), Thomson Neff linear drive Wiesel Powerline, travel 800 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Fpodpfxoz Ac T Ne Aivjn

Condition: ready for operation (used), Transroll spindle L = 1110 mm , Ø thread: 40 mm, pitch: 6 mm, Ø journal: 22 mm, Ø shaft: 30 mm, length shaft: 95 mm , Ø ball cage: 63 mm , Ø flange: 87 mm ,used, normal signs of wear, 100% functional, scope of delivery as per photos Fpsdoz Ac U Topfx Aivjn

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Fodez Adawspfx Aivjpn

Condition: new, Umbra Group / Kuhn ball screw drive total length: 1900 mm, thread length: 1460 mm, thread diameter: 80, pitch: 10 mm, nut: 105 mm, flange diameter: 145 mm, bolt circle: 125 mm, paragraph 1: length: 195 mm, diameter 60/50 mm, thread: M60 x 2 mm, paragraph 2: length: 165 mm, diameter 60/56 mm, thread: M50 x 1.5 mm, unused, 100% functional, scope of delivery as per photosATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fjdpfxez Adfae Aivjpn

Condition: new, Pneumatically operated chuck, clamping Ø 50 mm, manufacturer unknown, outer Ø 142/95/92 mm, inner Ø at connection 18.5 mm, unused, as new condition, 100% functional Fpsdpjz Ac Exefx Aiven

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Fpodez Adi Sspfx Aiven

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Fpodpswc Nrnsfx Aivon The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Heavy-duty casters, heavy-duty wheel, tire, wheel, swivel caster -Load capacity: 1,000 kg -steerable -Brake -Ball bearing Fpjdpfscgqc Eex Aivjn -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 4x wheels available -Price: per piece -Weight: 10 kg/piece

Condition: good (used), Heavy-duty casters, heavy-duty wheel, tires -Load capacity: 1,000 kg -Ball bearing -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 7x wheels available Fodpfxocgqc Ho Aivopn -Price: per piece -Weight: 7 kg/piece

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 20 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Fpedpfx Ajz A Iq Roivon ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: Price includes a new occupational safety inspection. New unit including a 12-month warranty. The battery will be regenerated using a power cycler, including a Kappa test. Charger included with appropriate plug. We will gladly arrange cost-effective transport for you. Lease-to-own is generally possible. We are an official Jungheinrich partner. Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, full free lift, CE certificate, safety light.

Condition: used, mileage: 219,000 km, power: 132 kW (179.47 HP), first registration: 10/2013, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 8,700 mm, total width: 2,360 mm, total height: 1,920 mm, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3612]---- Fpodpoz Dd Izsfx Aivjn Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options available even without a down payment * Trade-in of your vehicle, whether old or new Optional: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emission test * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT can be shown German vehicle Regularly maintained Ready for immediate use Aluminum platform body: Length = 6,100 mm / Width = 2,300 mm Overall length = 8,700 mm Total weight = 3,500 kg / Unladen weight = 2,225 kg Superstructure: FGS Systeme - Long platform, low-liner - Automatic climate control Automatic transmission Rearview camera Cruise control 3 seats CD + Radio ---- Would you like to lease or finance? We offer attractive options – even without a down payment! Please feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typing errors and prior sale are subject to change. The binding condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.

Year of construction: 2005, condition: excellent (used), Manufacturer: Kraus Type: RBA 89 Year of manufacture: 2005 Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Roller diameter: 100mm Fedpsnxkbpsfx Aivepn Axle distance between rollers: 120mm Total length: 1500mm Power: 0.75kW / 28 U/min Speed: 21 m/min Optionally with legs.

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 455/170/H1540 mm Fpedpfxsibitmo Aiven -Transport dimensions: 1230/170/H440 mm -Weight: 49 kg

Condition: used, mileage: 270,000 km, power: 213 kW (289.60 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Year of manufacture: 2021 Front axle: Steering Empty weight: 8.410 kg Carrying capacity: 10.590 kg GVW: 19.000 kg Fpsdpfoz Eptrex Aivsn Tail lift: DHollandia, 1500 kg = Additional options and accessories = - LED- lighting - Lock diff - Outside temperature display - Radio/CD player - Roof spoiler - Visor

Condition: good (used), Scale Manufacturer: Massi Measuring length: 500 mm Fpsdpfodx D T Eox Aivjn Beak length: 150 mm Overall length: 670 mm

Condition: good (used), The scope of delivery includes: 1x partition panel, used Material color: gray-white Overall length: approx. 775 mm Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | per piece Fpodpfx Aiji Eu Dvovjn

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump Fpjdpfxez Hbqxe Aiven 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm Fjdpfxot Tqgxe Aivjpn turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.

Condition: good (used), Technical data for the steel beam: Manufacturer: Stow Type: Pallet Rack NS Fjdpfx Ajz Hvu Ejivspn Included in the scope of delivery: 1x steel beam, used Material color: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Bracket: Single-sided, bolted crossbeam Overall length: 3,600 mm Note: Since this is a used item, scratches, damage, weld marks, or signs of rust may be present! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.