Used Three-Roll / Profile Bending Machine for sale (74,177)

Condition: new, Rollmak 3-Roll Round Bending Machine SME 130-15/4.5 Hodpfelu Ernox Adweu Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1550 mm Roll diameter 130 mm Smallest bending diameter 195 mm Weight 1210 kg Dimensions L-W-H 2650 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rolls electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety rope Values apply to St-37 / 240 N/mm² CE marking

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Hsdpfxjyurx Tj Adwju Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 32480 € 620.37 € 1550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 180 mm 180 mm 150 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity Hodpoynmzpofx Adwju the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Hsdpfxox Ii Hve Adwou Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Hodoza D U Djpfx Adwsu Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Hjdpfx Ajh A S Htsdwou Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € 2050 mm 6 mm Hsdpeyb Szbefx Adwou 6 mm 4 mm 4 mm 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven Hodpfx Adeucqqujwou - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Hjdpfx Adszuw D Towou Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), Faccin profile bending machine Hedpfoy Abz Ujx Adwsu

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) Hedpewiruljfx Adwju

Condition: new, Rollmak 3-Roll Round Bending Machine SME 140-20/4.5 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2050 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1550 kg Dimensions L-W-H 3150 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swiveled out Conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Hodpolu Eumjfx Adweu Values apply to St-37 / 240 N/mm² CE marking

Condition: new, sheet width 1000 mm plate thickness 3,3 mm Hsdpfx Asrb Hcfsdwou distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,39 t dimensions of the machine ca. 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Hjdpfx Adoiivgyeweu Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Hjdexacfgspfx Adweu * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Hedpfoy I Uh Sex Adwsu Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs Hedpfx Adoyx Dg Sewsu -CAPACITY CHART IN ENCLOSED

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hodpfx Aezxw E Ejdwsu

Condition: new, Rollmak 3-Roll Round Bending Machine ST3 130-15/6 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1550 mm Roll diameter 130 mm Smallest bending diameter 195 mm Weight 1650 kg Dimensions L-W-H 3250 x 850 x 1300 mm Motor: 3.0 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable Hedpfx Aolu Evnjdwju Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 17300 € Hsdpfx Adjwiqpboweu 332.16 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, Ostas 3-roll round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll 2 x digital display Sheet metal width 1570 mm Sheet metal thickness 8.0 mm max. Sheet metal thickness 7.0 mm for pre-bending Hjdpfxjiw D Smj Adwou Roll length 1570 mm Smallest diameter 255 mm Roll diameter 170 mm Weight 1960 kg Dimensions L-W-H 3200 x 920 x 1260 mm Motor 5.5 KW Equipment: Top and bottom rolls driven electrically Top roll can be swiveled out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Rollmak 3-Roll Round Bending Machine SME 110-10/5.5 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1050 mm Roll diameter 110 mm Smallest bending diameter 165 mm Weight 920 kg Dimensions L-W-H 2150 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Hodpfxjlu Epae Adwou Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Ostas 3-Roll Round Bending Machine ORM 1570 x 140 Special equipment included in the price: Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1570 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1570 mm Roll diameter 140 mm Weight 1450 kg Dimensions L-W-H 2725 x 800 x 1100 mm Motor: 2.2 KW Hjdpoiu Hqgofx Adwju Equipment: Top and bottom roll driven electrically Top roll can be swung out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: Hardened rolls Hodpfx Adeiw D Dxjweu Motorized rear roll adjustment Digital display Sheet metal width 1070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness 6.0 mm for pre-bending Roll length 1070 mm Smallest diameter 195 mm Roll diameter 130 mm Weight 1150 kg Dimensions L-W-H 2550 x 630 x 1020 mm Motor 3.75 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swung out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Hjdpfx Adeiw D Dmsweu Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 1070 mm sheet metal thickness 7.0 mm max. sheet metal thickness 6.0 mm for pre-bending roll length 1070 mm smallest diameter 195 mm roll diameter 130 mm weight 1150 kg dimensions L-W-H 2550 x 630 x 1020 mm motor 3.75 kW Equipment: top and bottom rolls driven by electric motor top roll can be swung out conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety rope, CE marking Values apply to St-37 / 240 N/mm²