Used Tdg Solutions Tdg Solutions - Pgi 1000 for sale (13,380)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa Pgedpfx Abjx Rqkueksn 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Podpfx Absh Ad E Hjksgn Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Psdpfex I Akusx Abksgn Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY. Psdpfx Abox Agmyokegn

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Pedpsxpuyuofx Abkogn Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Pjdpswy Uu Ajfx Abkogn

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Open size (without legs): 1700 mm Pedpeik Hbzjfx Abkegn Excluding hydraulic unit! Quantity: 1 unit Price/unit

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v 15.600 RUNNING HOURS PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION EXCELLENT CONDITION, READY FOR SHIPPING Pgodpow Nqn Nsfx Abkjn

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: Pgodpfx Aboyynd Rjkjn YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,294 h, functionality: fully functional, turning length: 550 mm, turning diameter: 390 mm, bar diameter (max.): 81 mm, DN SOLUTIONS DOOSAN PUMA GT2100B – YEAR 2023 🔹 Quantity: 2 Units 🔹 10” Chuck 🔹 Ø81 mm Spindle Bore 🔹 Max Turning Length: 550 mm 🔹 Max Turning Diameter: Ø390 mm 🔹 Box Guideways 🔹 Fanuc i PLUS Control Machine Details: • Machine 1: Cutting Hours 1294 (Equipped with programmable tailstock and tool presetter) • Machine 2: Cutting Hours 1230 (Without tool presetter) 📞 For detailed videos, photos, and additional technical information, please feel free to contact us. Pedpfxoyw Thij Abksgn Let’s get in touch and discuss further. Contact: Muhammed Özkaya

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Psdpfxjx Nhy Rj Abkjgn

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Pgsdpfxjydqlqo Abksn Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: like new (used), Year of construction: 2018, 4th Generation of The XXL system by Imaging Solutions 5-in-1 solution. Pgodpfen Ut D Njx Abken A LayFlat book block producing from sheets in just one working step. One push of a button triggers all of the necessary individual steps: cutting, creasing, folding, pressing, and gluing. LayFlat book blocks are produced with minimum manpower requirements, and same-day finishing and shipping is possible. Specifications: 2300 sheets per hour XL format book blocks up to 370 mm x 457 mm (14.5” x 18”) High-level performance: up to 250 book blocks/h Barcode controlled product selection: Different page lengths and book configuration (inlays) within one roll possible thus reducing time for batching Optional inlay feeder with a stacking height of 220 mm (8.66”) Unlimited number of inlays can be glued between two pages Active adjustment of gluing head for precise and homogeneous glue application Optional in-line book press for perfect book spines Easy to operate via touchscreen 5-in-1 fully automatic print finishing system Cutting, creasing, folding, pressing and gluing in only one workstep Complete LayFlat book blocks manufactured from sheets Integratable into barcode-controlled workflows (e.g. inline with 3-knife-trimmer) Provides consistent premium quality with low production costs Premium LayFlat photo book technology for panoramic pages Processes original photo paper and digital press paper.

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Pjdpfx Aben Ut Hcekegn

Year of construction: 2024, operating hours: 30 h, condition: like new (used), functionality: fully functional, Brand: DN Solutions Model: Lynx 2100LC Type: CNC lathe Chuck Size: 10 inch Max Turning Diameter: Ø350 mm Max Turning Length: 537 mm Bar Capacity: Ø81 mm X/Z Axis Travel: 205 / 560 mm Rapid Traverse X/Z: 30 / 36 m/min Spindle Speed: 3,500 rpm Spindle Power: 18.5 / 15 kW Spindle Nose: A2-8 Turret: 12 station Tool Size: 25 × 25 mm Control Unit: FANUC i Series Pgjdpfx Abjy U Dpfekon Tailstock: MT#4 Machine Weight: Approx. 3,450 kg

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: Podpsy Au Insfx Abkjgn - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE Pgjdpjvn T Daefx Abken 3 Spindle Machining Center Mfd. 2020 SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Width: 1000 mm Length: 400 mm Height: 700 mm Pgjdpfjx Uwr Tsx Abkon Number of axes: 5 Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, DN Solutions PUMA 4100LMA Manufactured: November 2023 Only 550 hours of actual cutting time FANUC i Plus / iHMI control unit 12-station servo turret 8 live tools (driven tools) C-axis Programmable hydraulic tailstock Maximum turning diameter: Ø550 mm Maximum turning length: 2,060 mm Swing over bed: Ø790 mm Bar capacity: Ø102 mm Maximum workpiece weight: 500 kg X-axis travel: 352 mm Z-axis travel: 2,155 mm X-axis rapid traverse: 16 m/min Z-axis rapid traverse: 20 m/min 12-inch (315 mm) hydraulic chuck Spindle nose: ASA A2-11 Maximum spindle speed: 3,000 rpm Main motor power (continuous): 22 kW Main motor power (30 min rating): 37 kW Maximum spindle torque: 832 Nm Live tool speed: 4,000 rpm C-axis indexing increment: 0.001° Chip conveyor Chip bucket Automatic centralized lubrication system Coolant system Tool life management Spindle load monitoring Manual Pulse Generator (MPG) Working lamp Pgsdpfx Aezdartsbksn Machine dimensions: 5,774 × 2,275 × 2,272 mm Machine weight: 11,050 kg

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 170 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, ⚡ DN SOLUTIONS DOOSAN – 2024 MODEL – UNUSED ✔️ 8 UNITS Pedjywy T Sjpfx Abksgn ✔️ Model: LYNX2100GA ✔️ Year: 2024.06 * 2 , 2024.12 * 6 ✔️ Chuck: 6” ✔️ Machining length: 330 mm ✔️ Machining diameter: 170 mm ✔️ Spindle bore: 45 mm ✔️ Spindle power: 18.5 kW ✔️ Max spindle speed: 6000 RPM ✔️ Guideways: LINEAR guideways ✔️ Control: Fanuc ✔️ Conveyor: Belt-type ✔️ Operating hours: 0 THE MACHINES ARE LOCATED IN OUR SOUTH KOREA WAREHOUSE. FOB PRICE INCLUDES PROFESSIONAL VACUUM PACKAGING. DISCOUNT AVAILABLE FOR BULK PURCHASES. Contact us for detailed photos, videos, and information – let’s talk and see how we can assist you. Muhammed Özkaya

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm Pedpfjzcwfnsx Abkegn EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Pgodoigruyjpfx Abksn

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, Pgodpfxezg Enko Abkjn siemens 810 Control, 24 Station ATC, Spindle power 15Kw, 10,000rpm, BT40 Spindle, Coolant,

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Pgsdpfx Aeu Ixt Djbken

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Model - 1000 Series 3. Pgjdpjwpunbefx Abkjn Serial number - TT2365. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.