Used Tamping Rammer for sale (141)

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device Tjdpfx Afjdhzf Ijxea • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication Tedpfxsdzqlto Afxja - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Tjdpfou Rwa Isx Afxea Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control Tjdpfx Afoi A A Tboxja - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz Tjdotx E N Tepfx Afxja - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm Todpfx Asrpk Axsfxoa output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units Tedpfx Afepq H Upsxja 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: Tsdpfxjtmty No Afxoa wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Tedpfjvz Hvcsx Afxja Weight 35 kg Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Tjdpfovz Hvvex Afxja Weight 90 kg Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Tedpsvz Hvisfx Afxea Weight 90 kg Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Tsdpevz Hvpofx Afxja Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 35 kg Tjdpfxovz Hu Ss Afxja Total power requirement 0 kw

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Hot Foil Stamping Platen / Heidelberg GTP Hot Foil Stamping Platen, Year 1963 - Serial No. GTP 61634 Min. format: 85 x 102 mm Max. format: 340 x 460 mm Speed: min. 1,500 sph – max. 4,000 sph Punching pressure: 60T Weight approx. 2,250 kg Complete with tools and accessories, including chase/frame Price on request Todeyk Siqspfx Afxsa Available immediately

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Todpfeynuudjx Afxja

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292500 € 30 to 3000x1500 mm 3000 mm 1500 mm 70 m/Min 60 m/Min 120 m/Min 40 mm 1200 1/Min 325 1/Min 2800 1/Min 6 mm 3 mm 3 mm 1.5 mm 28 0,1 mm 0,05 mm 22 U/Min 150 U/Min 200 kg 940 mm 6 bar 88.9 mm 15 kW 180 l 6650 mm 7650 mm 6300 mm 8300 mm Tjdpfjynna Hjx Afxoa 2310 mm 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station Index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules PRICE FCA TÜRKIYE

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm Tedpfx Afjynnaysxoa 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Tjdpfx Afjynnatexsa Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Tjdpfx Afeh T Ulyexja

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 131 644, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min shut height. 350mm Tsdpefn Affjfx Afxoa table dimensions: 1080 x 800mm slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Tsdpsuyk S Asfx Afxja

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Tjdpfx Afjyi Hpcexea Software / Dongle Metalix cncKad V10

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Tjdpoxm U S Sefx Afxea Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC Tjdpfx Afsh N Di Dsxea - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 635 SV refurbished acc. CE Standards 6,35x70 mm. 360 ppm Available with RF system to produce semitubular parts. - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl Todpfx Ajh N Dh Aefxoa HBR will provide at total revision.