Used Sw Ba 35 Cnc for sale (22,932)

Condition: ready for operation (used), Bosch CNC CP /MEM 5 / G107 / 913572 CPU module card, used, in good condition, 100% functional, scope of delivery as per photos. Psdox Eqxhspfx Ahljpt

Condition: ready for operation (used), BWO Lorenz CNC 785 control panel and display 082205 SN: 4935.001 P2, used, normal signs of use, 100% functional, scope of delivery as per photos Ppodpfjlcf Rbsx Ahljt

Condition: good (used), Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKO -Width: square 22 mm / see photos -Quantity: 2 pieces available -Price per piece -Dimensions total: 920/22/22 mm -Weight: 2.5 kg/piece Ppedpoitt Rgofx Ahlot

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,273 h, load capacity: 3,500 kg, lifting height: 3,680 mm, fuel type: electric, mast type: telescopic, construction height: 2,650 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 21x8-9 Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of manufacture: 2025 Description: In addition to this unit, we offer a range of other forklifts and warehouse equipment. All machines are workshop-tested and FEM 4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing options available on request and under attractive terms. We offer professional and comprehensive advice on our vehicles. Ppedpfjxfm H Sox Ahlst Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, full cab, interior mirror, joystick, beacon, windscreen wiper, single pedal, LED, seat,

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Ppjdpsw Dufijfx Ahljt *

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Ppsdpsx Haryjfx Ahljt Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Podpfod Iinyex Ahljpt Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized lightweight box bodies on new or used low-frame chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a great deal of flexibility in the implementation of your idea. Every project has its own ID. VW Crafter 2.0l 2011 Euro5 3500Kg First registration 21.12.2011 Mileage 92.300 km Fuel Diesel kW/hp 100/136 Manual gearbox 6 gear ccm 1,968 cm³ Sales body is NEW, unused and with a large sales hatch across the entire width of the vehicle, 2-seater, driving license class B, rear running board, LED lights, reversing camera. Psdef D Rdtopfx Ahlopt Box body made of 25 mm GRP sandwich element Superlight with alcove. Rear door single-leaf 700 x 0 mm. Floor made of non-slip industrial floor panel R11. Exterior LED lighting in accordance with road traffic regulations and EU regulations. Interior dimensions WD 3800 x 2250 x 2300 mm Side flap WxH 3570 x 1480 mm Permissible total weight 3,500 kg Unladen weight 3,065 kg Interior is NEW!!! Left side: Commercial refrigerator with glass door, convection cooling Underframe for table-top appliances with sliding door, gas hob-2 burners 8.5 kW gas griddle plate Glatt 8 kW gas double deep fryer 2 x 8L 12.5 kW electric bain marie 2 kW wall-mounted hood 2200 incl. extraction, grease drain tap, flame protection filter, heat protection wall and lighting Gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas pipe and gas test certificate Right-hand side: Serving table with sliding doors and stainless steel worktop 900 serving station with hinged lid 254L double sink with shelf incl. fresh and waste water tank, boiler Chalkboard with wooden frame LED illuminated Further equipment: Shelf above the sales hatch, folding bag shelf at the sales opening. 2 LED panels on the ceiling and 3 dimmable LED spotlights above the sales counter. Plenty of storage space. Standard electrical installation 380 volt/16A, power socket in accordance with CEE standard, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price ¤ 63,920.00 plus 19% VAT Subject to errors and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: H2X393X00428, Year of construction: 2020, operating hours: 4,094 h, load capacity: 3,500 kg, lifting height: 3,650 mm, fuel type: diesel, mast type: simplex, construction height: 2,480 mm, drive type: Diesel, Diesel forklift Chassis number: H2X393X00428 Mast type: Standard Condition: Ready for operation and fully functional Ppsdjwzzr Djpfx Ahlst Technical condition: Good Description: Linde H 35 D -02 Ref. No.: R0583 Year of manufacture: 2020 Operating hours: 4094 The unit is in excellent visual and technical condition. Fast and uncomplicated transport can be arranged upon request! This listing is provided for identification purposes only. A detailed description of the condition and possible features is available on request. Errors and interim sale excepted. Sale only to commercial customers. All sales of used equipment are made without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a wide selection of additional units available on site. The machine is in good visual and technical condition. 3rd valve, 4th valve, rear working lights, front working lights, roof cover, partial cab, load guard.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Ppsdewx Hktspfx Ahljt Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: good (used), Year of construction: 2001, For the commission-driven drilling and pressing of hinges as well as drilling Of handle and lock holes and indentations for special fittings and additional bores Up and down at doors. Workpiece dimensions: • Length: 300 mm 2500 mm Podpjc Tu Rvefx Ahljpt • Width: 200 mm 800 mm • Thickness: 16 mm 30 mm • The workpiece width must not be greater than the workpiece length! Working height: 970 mm

Condition: new, Year of construction: 2025, The EQPB BabyPress is a hydraulically operated table model with CNC control. It is a robust and low-noise machine that has been specially developed for the production of small parts. The entire production, from the hydraulic cylinder to the control cabinet construction, takes place in-house. The advantages: - Basic C-frame design - Compact table model - Ideal for prototypes and small series - Very short set-up time - Functionally simple - Wide range of applications Standard basic design: - Upper cheek guide with high-precision roller guide Ppjdpfxsglkfpo Ahlst - Mechanical tool clamping system Promecam - Narrow table with single V-tool holder (13x20) - CNC control Delem DA-41T - Y-axis CNC-controlled for programmed plunge depth calculation - X-axis CNC-controlled 170 mm traverse path - R-axis manual - low noise level - low power consumption - easy operation technical data: - pressing force 62 kN - working length 285 mm - clearance between the uprights 230 mm - Installation height 215 mm - throat 70 mm - ram stroke 100 mm Ram speeds: - Press stroke max. 9.8 mm/s - retraction max. 50 mm/s - Motor power 0,7 kW - main dimensions (WxHxD): 900 x 1.300 x 550 mm - Machine weight approx. 0,25 t - Tank capacity (hydraulic oil) 10 l Optionally, we offer this machine without CNC control and / or a press force of 12 t, just contact us.

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2023, * CityRollup superstructure * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC Ppjdpfxeqz R Dms Ahljt * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: used, mileage: 500 km, power: 110 kW (149.56 HP), first registration: 04/2021, fuel type: electric, overall weight: 4,250 kg, color: white, gearing type: automatic, number of seats: 3, total width: 2,170 mm, total height: 2,960 mm, loading space length: 3,420 mm, loading space width: 2,050 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, central locking, ORTEN Electric Trucks E 35 deep-freeze body K Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN GVW: 4,250 kg (driver's license class B) Wheelbase: 3,745 mm Tires: 185/75 R 16C Paint: White similar to RAL 9003 Technical data: ? Top speed: 85 km/h ? Range: approx. 150 - 200 km? Battery: Lithium iron phosphate (LFP) nickel and cobalt free ? Battery capacity: 80 kWh, 400V / DC ? Charging plug: Type 2 Mode 3 / AC / IEC 62196 ? Charging time: approx. 3.5 hours at 400 volts / 22kW AC ? Electric motor: Synchronous electric motor, water-cooled ? Motor power: 92 kW rated power ? Torque: 410 Nm ?Note: The range can be reduced depending on: ? Driving behavior. ? Weather influences. ? The nature of the route. ? The duration of use of auxiliary consumers, heating, air conditioning, refrigeration unit. ORTEN lightweight TK box body type TK 36 K Technical data: Inner length: 3,420 mm Inner width: 2,050 mm Inner height: 1,920 mm Outer length: 3,605 mm Outer width: 2,170 mm Wall thicknesses: Body roof: 100 mm Front wall: 100 mm Side walls: 60 mm Tail doors: 80 mm Body floor: 103 mm Floor assembly: 150 mm high aluminum subframe. Self-supporting multi-layer insulating floor, 103 mm thick, with high-strength epoxy resin surface, anti-slip. Side walls: Side walls in sandwich construction, 60 mm thick. Front wall: Reinforced front wall to accommodate a cooling machine, 100 mm thick. Superstructure roof: Reinforced roof to accommodate a ceiling evaporator, 100 mm thick. Rear doors: Stainless steel portal frame. Ppsdpfx Aoht Swkehljt Double-leaf rear doors, 80 mm thick, stainless steel fittings. Safety lock with emergency release from the inside. Bar door stop in stainless steel. Side door right: Single-leaf side door on the front right, approx. 1,800 mm x 900 mm, internal stainless steel door lock. Bar door stop in stainless steel. Load securing: 2 rows of airline lashing rails attached to the side walls. 4 round locking beams. Parking bracket for round locking beams on the top of the rear portal. Cooling: Strong version of cooling machine and ceiling evaporator, Carrier Xarios 600 with cold recorder. Electric auxiliary drive with inverter and control software, for operating the cooling machine while driving. Separate 32A power connection, for operating the cooling machine when stationary with external power connection. Cooling capacity: Freshness: 0 °C / 30 °C Deep freezing: -20 °C / 30 °C Heating: 3950 w Air circulation: 2350 m³ / hour Volume: 55 dB quiet!!! Accessories: Water drain in the floor at the front left and right, including rubber seal. Baseboard, anodized aluminum, 300 mm high, all around. Movable cold curtain on the rear and side doors. 2 LED interior lights with motion detectors, recessed. LED outline lights, 2 x front, 2 x rear. LED additional brake light. Fixed entry step at the rear across the entire width of the body. Plastic fender for the rear axle. Mud flaps Side marker lights. Side collision protection Vehicle approval § 13 EG-FGV. Weights: Chassis with ORTEN TK refrigerated body: approx. 3,250 kg Payload with ZGM 4,250 kg: approx. 1,000 kg (driver's license class B) Leasing examples ORTEN Electric Trucks E 35 deep-freeze body K: 89,900.00 ¤ net acquisition costs 60 month term calculated residual value 25,000.00 ¤ 1,380.00 ¤ monthly installment

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Podpfx Ahski Tzusljpt Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Year of construction:2017

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Ppedpfxexv Su Ne Ahlst Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: used, Year of construction: 1990, Motor output 5 kW Ppsdewgnz Njpfx Ahljt Weight 1.500 kg Control cnc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Psdpfx Ahof Sqiqslspt

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Pjdpevnv Ubjfx Ahlopt Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : Pedpfeymcmrsx Ahlept - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: new, 355 mm 350 x 350 mm Psdpfjfm T Hbjx Ahlspt saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Dowels Inserting (Fitting insertion). With BECKHOFF Numerical Control Composed by the following machines: A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system Ppjdpfx Ahem Uyngolst C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system E) 4th FLEXIBLE CNC Mod. BMA-DLS for drilling, montage, glue application and insertion F) Connection TRANSFER G) In-feed and rotating system RWA/RWZ- CNC H) In-feed and rotating system ZWA-1- CNC I) CARCASE CLAMP PRESS Mod. KP-3- CNC, through-feed system L) Out-feed transfer

Condition: new, pressure: 135bending length: 3020column width: 2555daylight: 550stroke lenght (max.): 320column throat depth: 450messurements (LxWxH): 3745x2250x2835weight approx.: 93004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 15 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Psdpsd Ehinofx Ahljpt Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                                  ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)                  ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)                ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)                ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Podpsxxxu Uefx Ahljpt

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of manufacture: 2015 Material conveying device: Ppjdeu Rcz Dspfx Ahlst Manufacturer: Labotek Type: PGT 4-I/MV/MR/P1 Model: 101501 Year of manufacture: 2016 Power: 0.4 kW