Used Spray-Dryer for sale (3,422)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Bledpfxjzg Dx Uo Aqtji Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Bedpfsy Exz Rox Aqteli

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Blsdpfow El Azox Aqtsi Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Weight: 447 kg Packaging volume: 2 m³ Electric power: 20.7 kW Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Year of manufacture: 2012

Condition: new, Year of construction: 2025, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Bsdpfoi Hplrex Aqtoli Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Bljdpfx Aoyffyleqtsi Weight: 850 kg

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 7 bar Bsdpfx Aqod Ih R Hstsli

Condition: used, Year of construction: 1990, Airflow rate: 1500 / 3000 m³/h Storage location: Nattheim Bodszgi R Aepfx Aqteli

Year of construction: 1998, condition: ready for operation (used), An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible. Bjdpfx Ajzh Ng Hjqteli

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Bljdpfsw I A N Aox Aqtji

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Bedszba N Tepfx Aqtsli Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: good (used), Weiss SC 450 Corrosion Testing Device Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing device / salt spray testing chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight, empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Testing Procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Bledpozbatrjfx Aqtei Condition Used equipment from industrial application. Operating hours according to display: approx. 37,926.6 h Optical condition as shown in the pictures. Interior with visible deposits / corrosion marks due to use. Device can be switched on, display is active. Inspection and testing on site possible by arrangement. Scope of delivery: see pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Equiptec 600-liter plastic material dryer. Bsdpol Sknxofx Aqtjli

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Bodpfx Aqjzddqmetsli Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Bodpfxozdcxpj Aqtjli Drive power 30 kw

Year of construction: 2011, condition: excellent (used), Sheer reed dryer Year 2011 Bsdpfx Aqoigvtustsli In very good condition.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system - Stacking dimensions: 530 x 105 x 115 cm Bsdpey R Ha Sjfx Aqteli - Stacking volume: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Year of construction: 2009, condition: used, Used machine environmentally friendly thanks to the use of R404A Energy savings due to rotary refrigerant compressor (20–30% more efficient than conventional piston type) Intelligent condensate drainage Maximum operating pressure: 13 bar Processed compressed air volume: 5,200 l/min, 7,312 m²/h Motor power: 1.58 kW, 230 V Maximum inlet temperature: 55°C Dimensions: 557 x 460 x 789 mm Availability: short notice Storage location: Röllbach Bedpow Rhi Tofx Aqteli

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Blsdjy Nkqxjpfx Aqtji Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Year of construction: 2012, condition: used, functionality: fully functional, We are offering this used, fully functional MAFAC KEA spray cleaning machine, manufactured in 2012, for sale. The machine comes from a company acquisition. Complete documentation is available, and all maintenance intervals have been observed and carried out by the manufacturer. Features include a 1-tank system, 5-sided spray cleaning, a load capacity of 100 kg, and compatibility with Euro standard baskets (608 x 408 x 300). It has a heating capacity of 10 kW, an integrated hot air drying system, and a user-friendly Siemens S7 control system with plain text display. Bledpszg Uq Iefx Aqtsi If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Bsdpfxey A Tpqj Aqtjli Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Rehnen Spraying Table Lacky The advantages: Thanks to its arms, which can rotate 360°, it always provides the best support and a good surface for all workpieces. Easily adjustable in height and rotatable by 360° for quick and efficient work. Thanks to its covers, even after intensive use, the arms can still be moved. Height in mm: 950-1250 Width in mm: 600-1120 Length in mm: 700-1260 Diagonal in mm: 900-1680 Load capacity in kg: 100 Blodpjlrrrmsfx Aqtji Location: in stock – available immediately.

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Blodpsfh Hahjfx Aqtoi Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter life - Universally applicable, variable accessories - High flexibility Bledpfxobpg E Eo Aqtsi - Mobile design - Extraction technology with front plate system Technical data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Airflow: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical fields of application: - Furniture and wood industry - Aerospace - Off-road - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Suitable for the following materials: - Wood stains, paints and glazes - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane Bedpjy A Ni Tefx Aqteli - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Bljdpfxexvivqj Aqtei Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland