Used Schaal Sep 40 for sale (22,225)

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Ledpfszkx Hnjx Afkjhk Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Lodpfozkx Ifsx Afkehk Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Ljdpfsy Ipbmox Afkehk Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2024, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 285 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Mixing machine Boku RS 40 E Lhjdpjy Nv Aasfx Afkok Mixing machine with simple, robust technology! 2 working functions: 1 x mixing / 1 x whipping 1 mixing beater, 1 whipping beater 1 40-liter stainless steel container Working shaft/mixing shaft in new-like condition Connection: 400V, 16A CEE plug DGUV V3 tested Used machine Many more mixing machines are waiting for you in our warehouse!

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min Lodpszf Nn Esfx Afkshk feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz - Variable speed control via SEW frequency inverter - Cable remote control Lhedpfezgx A Iox Afkok - Clockwise and counterclockwise rotation - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: SSI Schäfer Type: PR600 Included in the scope of delivery: 01x Pallet racking crossbeams, used Material color: RAL 5010 Enzian blue Box profile: 110 x 40 mm Crossbeam type: TRV1-270-114-30 CE Clip: 5 hooks Clear width: approx. 2,700 mm Max. load per crossbeam pair: 3,000 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams Your contacts in our company: Ljdpfx Afezg A Rpjkohk Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), gear motor, electric motor, three-phase motor, electric gear motor Lsdpfx Ajvyp Huofkohk -Manufacturer: STM, gear motor type RMI 40 FL SIN -Speed: 377 rpm i= 1/7 -Manufacturer Motor: ABB 0.37 kW -Shaft: Ø 19 x 80 mm -Dimensions: 315/200/H160 mm -Weight: 7.6 kg

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Benning, charger Belatron type E 220 G24/40 B-FB -Input voltage: 220V 50Hz -Power: 25.2V/40A -Quantity: 2x charger available -Price per piece -Dimensions: 550/410/H780 mm Lhjdsq Adp Hspfx Afkjk -Weight: 53 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm Lsdpfsf Ek Igsx Afkohk -Weight: 14 kg

Condition: good (used), Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 455/400/H880 mm Lsdpjd N E Nnsfx Afkehk -Weight: 23 kg

Condition: used, Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm Ledpfx Afocu Ervskehk -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Lhedec Il Dwjpfx Afkjk -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Lhsdjc S D H Aspfx Afksk -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling Lhodpfx Afsflw A Aekjk -Shaft coupling for: splined shaft -Shaft: Ø 40/36 mm, Ø 30/27 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 140 x 105 mm -Weight: 5.8 kg/piece

Condition: used, Roof window roller shutters, blinds, roller shutter curtains, blind profiles -different profiles -Frontal 40: Kit Maniglia Alta Lhodpsd Tgavjfx Afkek -Measurements see: photos/piece lot -Sale: complete -Dimensions: 2800/1150/H550 mm -Weight: 188 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos Ledpfsfckfhsx Afkehk -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate Lsdpfx Asun Dviofkohk -Dimensions: 400/330/H430mm -Weight: 32 kg/piece

Condition: used, 2 x radial tool holders VDI 40, each: 400 Euro net. Ledstz U Iispfx Afkshk 2 x axial tool holder VDI 40, each: 250 Euro net.

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 4282A-G-100 L/40 i = 43.65 -Speed: 33 rpm -Engine: Type SK 100 L/40 -Power: 3 kW / 1410 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 530/260/H465 mm -Weight: 85 kg Lhedot E D N Djpfx Afkjk

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm throat mm Ledpfet Hwvtox Afkjhk total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Year of construction: 1982, condition: used, degree 1150 working heigth 200 mm length 1000 mm width 800 mm depth 1400 mm Coil Weight per Base 300 kg Base Diameter mm Ledpet Hw Rwofx Afkehk Stack height 0 mm No. – Furnace 0 No. – Base 0 No. – Cooling Hood 0 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x60/I SN31 IGO500/2 -Voltage:40V -Torque: 324 N/cm -Speed: 200 rpm -technical data: see photo type plate Lodpfx Afjtpyq Ajkehk -Shaft: Ø 10 x 27 mm -Number: 11x engines available -Price per piece -Dimensions: 210/90/H100 mm -Weight: 2.6kg/pc.

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 Lhedetff Anspfx Afkjk -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc.

Condition: used, Gear motor, electric motor -Gearbox manufacturer: SEW -Engine manufacturer: SEW -Speed: 20/40 rpm -Power: 0.55/0.66 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: -Price: per piece -Number: 7x available -Dimensions: -Weight: 53 kg Ledpfx Ajckbfuefkohk