Used Sas Raz-End 1250/4 for sale (63,128)

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Ncsdpfx Aiow Az Rpoyeu

Condition: ready for operation (used), Year of construction: 2019, The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little. Njdpfx Aswbpy Ajiyjcu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. Ncsdpfx Aevunxfoiyju The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Year of construction: 2010, condition: good (used), weight 3000 kg Nedpfx Ajhhiawoiyocu

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 40 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A40-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 40 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo motor-driven back gauge system, compact body structure, and professional tooling equipment, it provides an efficient solution for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Distance between Upper and Lower Dies (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel body construction Hardened ball screw Linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Flat type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure preventing the dies from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter A Series Open Cabin Guarding CRONOSS Premium open cabin Wide field of vision Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Upper Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-Saving Standby Function 2 Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Curtains AKAS® II laser safety system Finger protection system Laser protection in line with the upper die Increases operator safety CE conformity Maximum working distance: 4.3 meters Technical Specifications Bending Force: 40 Tons Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Nodpfx Aszbrcrjiyjcu Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 25400 € 485.14 € 40 to 1250 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW Nsdpewirw Hsfx Aiyecu 1750 mm 950 mm 1900 mm 1640 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Nedpfxoxz R Ixs Aiyjcu Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: new, Year of construction: 2026, GVN Trailer 4 Axle Extendable Lowbed          Ncsdeqxq Aiopfx Aiyju Please get contact with us for more informaiton      

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Ncjdpfx Aszcnuyeiyju Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V Nodpfszc Rv Tox Aiyjcu total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Ncjdpfx Aezbqqueiysu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Ncsdpfxezcpu Uj Aiyeu Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept Ncjdpfox Sr Dfex Aiyju - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm Nodev Tpxqepfx Aiyecu -Weight: 3900 kg

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Ncsdpfx Aoycu E Eoiysu Width:1900mm Height:2200mm Weight:2900kg

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Njdpfx Aiekvm S Noyjcu Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Ncjdpfxjkvm Sze Aiyeu Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Njdpfx Aiskvm Nfoyscu Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Nodpfx Aioy Expueyjcu Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll Ncodpfjkwcc Nox Aiyou 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m Ncsdpjyh D Nnofx Aiysu

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Ncedpofh Skpefx Aiyeu Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Weight: 625 kg Included with the machine: Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Ncodey I Uh Sspfx Aiyeu Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 24500 € 470.4 € 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm 3.5 mm 3.5 mm 2.5 mm 130 mm Njdpfoynmwdex Aiyecu 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3300 mm 1150 mm 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 43000 € 821.3 € 2050 mm 10 mm 10 mm 8 mm 10 mm 8 mm 8 mm 6 mm 200 mm 200 mm 180 mm 6 m/min 3850 mm 1350 mm 1290 mm 3750 kg motorized roller drive upper and lower roller driven Ncjdsyb S Arepfx Aiysu hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed