Used Romi Vertical Machining Center for sale (68,683)

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) Nodpfx Asu Idn Homnewg *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t Nwjdsu Iddnepfx Amnog air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze Nedju Idfrspfx Amnjwg tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle Nodpsu Ndbpjfx Amnjwg digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place Njdpfxew A I Uuj Amnowg spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 Nedpfx Aovithzjmnowg spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm Nodpsvc Avbofx Amnowg control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 870 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 8 m/min, controller manufacturer: Heidenhain, controller model: TVN530, table width: 970 mm, table length: 2,800 mm, rotational speed (max.): 6,000 rpm, overall weight: 19,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 15 bar, spindle motor power: 15,000 W, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 32, tool length: 350 mm, tool diameter: 110 mm, tool weight: 15 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used DAHLIH DL-MCV2600 vertical machining center, year of manufacture 2006. Model: DL-MCV2600 Serial number: 30011M0023 Production date: 09.2006 Maximum spindle speed: 6000 rpm The machine has mostly operated in a single shift and has been moderately loaded. In recent years, it was only used as a backup. Video material of the machine in working condition is also available. The machine must be removed from the workshop at short notice due to the purchase of a new machine. Nodpfxjy Rtkkj Amnjwg For more information, please refer to Fidomatic’s contact details.

Condition: used, Year of construction: 1990, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg Nsdpfsy S T T Uex Amnowg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Under offer is a complete CNC tool shop, whioch will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! Nwodpoy Sluqsfx Amnsg MACHINE DETAILS Control: Fanuc EQUIPMENT Accessories as shown in the pictures

Condition: used, functionality: unexamined, Hurco VMX60T vertical machining centre Nsdpjy Duv Ujfx Amnewg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind Nedpfxotrhq Ho Amnewg - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz Nodjw Nklhopfx Amnewg - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Nwjdpfjy Uhnrox Amnsg Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: excellent (used), Year of construction: 2006, Travelling-column vertical machining centre with linear motor X-axis Nedpfx Amsy Skmronjwg Control: Heidenhain iTNC 530 (3D path) Travels: X 2,500 mm / Y 920 mm / Z 820 mm Spindle: 20 – 18,000 rpm · HSK taper

Condition: used, Year of construction: 1991, x-travel 5000 mm y-travel 550 mm z-travel 550 mm Control Fanuc type Series 15 M table surface area 5000x520 mm Table load 4000 kg quill stroke 550 mm throat 580 mm distance between table/spindle 250-800 mm spindle taper ISO 40 spindle turning speed range 40-2000 U/min Tool changer 40 total power requirement 55 kW weight of the machine ca. 20 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Nsdpeyqum Eofx Amnjwg Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining centre Nsdpfx Aey Hq Rgomnowg Mori Seiki Type NV5000 Year 2006 3 phases CNC Fanuc

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, Njdpfx Asyylzaomnowg ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, Nwsdpoyyldhefx Amnjg maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, spindle probe, Through spindle coolant

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, Fanuc MXP200 Nedpfsy R Ddzsx Amnswg travels 1600x800x800 mm spindle BT40 maximum spindle speed 12,000 rpm tool changer for 30 tools center spindle coolant 20 bar chip conveyor

Condition: used, YCM YEONG CHIN YCM - FV 56T is a Vertical machining center, designed for precision, high accuracy and reliability. Table 700×420 mm, 3 T-slots (14 mm) at 100 mm pitch, table load max 300 kg; travels X560 Y410 Z450 mm; 4 simultaneous axes. Tool changer 16 positions, BT30, tool Ø max 63 mm (100 mm with free pockets), tool length 200 mm, tool change 1 s; spindle 45–15,000 rpm; feed 10,000 mm/min; rapid X/Y 36 m/min Z 24 m/min; spindle power 3.7/5.5 kW; 3x400V 50Hz; weight ~2800 kg; dimensions 2630×1620×2240 mm. Accessories: 4th axis table (B), coolant system, spindle blow-out, automatic central lubrication, status light. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool sectors Nsdpfx Asy S A H Remnjwg

Condition: excellent (used), Year of construction: 2012, Haas Minimill Year of manufacture: 2012 Taper: BT 40 Nedpfxey Smyuo Amnewg Spindle speed: 10,000 rpm Video available!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Njdjyay D Uopfx Amnowg Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Nodpoyaywbofx Amnswg Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, Year of manufacture 2007 Nwodoy I Dpxepfx Amneg Fanuc control system Quaser 1500/750/750