Used Positive Displacement Pump for sale (18,484)

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, Hedelius Acura 65 Marathon, Year of manufacture 2022, Control system Heidenhain TNC 640, Horizontal travel X/Y/Z 700/650/650 mm, Vertical travel X/Y/Z 465/465/379 mm, 2-axis NC swivel table – rotary table 400 x 400 mm, Tool changer, 60 positions, Additional magazine, 180 positions, Spindle speed up to 14,000 rpm, Kdjdoznvbqepfx Adqjr Tool holder SK 40, Water-cooled milling spindle, Water-cooled A + C axes, 22-position pallet system, 15 pallets available, Pallet size 400 x 400 x 38 mm, Zero-point clamping system, Pallet storage system MARATHON P422, 5-axis simultaneous machining ACURA, Kinematics option, Formingstar package, Accuracy package for Z-axis, Internal compressed air supply, Sloping bed band filter system, Internal coolant supply 25 bar, Pressure booster pump 50 bar, Pre-filter for sloping bed band filter system, Exhaust air filter LTA 3001, Extended chip flushing system, 30-infrared measuring probe M&H, Laser control system, 50 spindle hours since last maintenance.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm Kdodpfszlktpox Adqjr -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. Ksdpfxozr N E Dj Adqedr • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW Ksdpfsy E Hynex Adqedr machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Kdodpfx Adjzu Rzljqsr Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Kodpfx Aozfyk Rodqedr Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm Kdsdozuw H Iopfx Adqer - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Kdedpfx Adezuw E Roqsr Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: used, mileage: 800,000 km, power: 375 kW (509.86 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Front axle load 9.0 t, Audio system: CD radio (Bluetooth), Right exterior mirror with maneuvering position, 220 Ah battery, CB radio, Aluminum compressed air tank, Additional compressed air tank, Air horn, Electrical pre-wiring in the cab 24V / 100 A, Cab: steel-sprung, Comfort, Suspension: Front springs 9.0 t, 4 leaves, Additional parking brake on the front axle, Vehicle without rear window, 16-speed gearbox - Type: G 280-16, Rear axle differential gear 300, 12.7 cm info display with video function, Interior filter for construction site vehicles, Communication interface, Fuel tank: 390 L, Aluminum, left, Alloy wheels 11.75x22.5 (ALCOA Dura-Bright, on front axle), Alloy wheels 9.00x22.5 (ALCOA Dura-Bright), Air intake behind the cab, Reinforced engine brake, Reinforced engine compartment encapsulation, Auxiliary drive MB 123-10c, Parameterizable special module, Spare wheel, Acoustic reversing warning (external warning signal), Seats in the cab: Driver's seat, sprung comfort seat, Seats in the cab: Driver's seat backrest foldable, Exterior sun visor, Sunshade roller for side window, driver's door, Voltage converter 24V / 12V 10 A, Stowage flap outside left, 12V socket in the co-driver's footwell, Additional 24V socket in the co-driver's footwell, Turbo-retarder coupling, Preparation for reversing camera, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air connection in the cab, Cab: Width 2.30 m, Cab: Movable cab entry, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Power windows, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Manually operated roof hatch (steel), Interior filter: Pollen filter, Body / Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Heated air dryer, Engine 12.8 L - 375 kW R6 Diesel (OM 471), Frame lowering without bellow residual pressure regulation, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Stabilizer front axle, Cab socket 24V, Tachograph / EC control unit, Rear underrun protection fixed, Preparation for toll collection, Front axle straight, Water pump regulated, Permissible gross weight 26.0 t, Oil cooler gearbox * Mileage: approx. 800,000 km * Engine: OM471 Diesel * Power: 375 kW / 510 hp * Displacement: 12,809 ccm * Transmission: Automatic transmission * Retarder: available * Axles: 6x4 * Front: Leaf suspension * Rear: Air suspension * Body: Timber transport / stakes * Body length: 6.20 m * Body width: 2.47 m * Unladen weight: 14,230 kg * Permissible gross weight: 26,000 kg * Technically permissible total mass: 28,000 kg * Payload: 11,695 kg * Color: Black * Emission standard: Euro VI Kjdezu U H Espfx Adqjdr * VIN: WDB9642241L982193 ----* Condition / Note: * ATTENTION!!! * The gearbox was removed together with the clutch. * Significant signs of wear were found on the retarder coupling and the retarder gear. Therefore, a repair of the vehicle is necessary. The worn and damaged components can be clearly seen in the photos.---- * TÜV (technical inspection) valid until 09/2026 * First registration: 09/2015

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Kedpfx Adezuwt Uoqedr Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, Kodpfjzdk Iwox Adqodr - 6kW vacuum pump, PC & iPC Sign Standard, camera. - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; - Removable&adjust.depth control cup; - Hand tool for knife blade change

Condition: used, Year of construction: 2007, operating hours: 3,826 h, Equipment: all wheel drive, Internal vehicle number: MK300047 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Used JLG 460SJ telescopic boom lift, manufactured in 2007. The machine offers a working height of 16.09 m, a horizontal outreach of up to 12.72 m and a platform capacity of 270 kg. Its four-wheel hydrostatic drive, oscillating axle, 45% gradeability and foam-filled tyres make it suitable for demanding off-road applications. Technical details: * Make/model: JLG 460SJ * Machine type: Telescopic boom lift * Year of manufacture: 2007 * Operating hours: 3,826 h * Machine weight: 7,741 kg * Working height: 16.09 m * Horizontal outreach: Up to 12.72 m * Platform capacity: 270 kg Kodpfx Adozqicmeqodr * Platform dimensions: Approx. 0.91 × 1.83 m * Platform rotation: Hydraulic, up to 180° * Turntable rotation: 360°, non-continuous * Jib movement range: 130° (+70°/?60°) * Drive system: Four-wheel hydrostatic drive * Engine power: 36.4 kW * Fuel tank capacity: 83 litres * Hydraulic tank capacity: 136 litres * Emergency pump motor: 12 V DC * Travel speed: Up to 7.2 km/h * Gradeability: 45% * Axle oscillation: 0.20 m * Maximum ground pressure: 4.85 kg/cm² * Vehicle number: MK300047 * Condition: Used * German vehicle Dimensions: * Overall width: 2.31 m * Transport height: 2.47 m * Transport length: 8.91 m * Wheelbase: 2.37 m * Ground clearance: 0.30 m * Turret overhang in working position: 0.86 m * Inside turning radius: 2.00 m * Outside turning radius: 4.84 m Equipment: * Hydraulic platform rotation * Proportional control * Improved multi-function control * Interactive ground control display * ADE® control system * Platform display for machine status * AC cable to platform * 5-degree tilt alarm with warning light * Pivoting engine console * 12 V DC auxiliary power supply * Hour meter * Four-wheel drive * Oscillating axle * Movement alarm * Horn * Glow plugs * Lifting and securing eyes * Tyres: 12 × 16.5, foam-filled Inspection possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Kedsznkgnopfx Adqedr Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Ksdpfx Ajwm Iy Eodqodr Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: PRATIX Z2-27, functionality: fully functional, operating hours: 13,802 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 10, overall weight: 2,000 kg, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (min.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. Kdjdpexgdc Hjfx Adqjr 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Kdjdpsztb Imofx Adqjr Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Supply voltage: 400 V Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units Ksdpfxozr Nuro Adqedr • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS Kjdpjxrnwlofx Adqjdr LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: SK 40 according to DIN 69871 (Optional HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (SK40 / HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included: * Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm * Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD) * External Coolant Supply: 4 bar / 40 l/min * Washdown Pistol with pump (2 bar / 10 l/min) * Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring: * Infrared Measuring Probe: Heidenhain TS 649 (SK40 / HSK-A63) * 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Kdedszdzmwepfx Adqor Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Kjdpfx Aszcpnzodqsdr Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING HEAD "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL" XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (stop inner side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / Number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Traverse speed X-Y axes Pro-Speed m/min 85 Speed Z-axis m/min 30 INSTALLATION Installed power KVA 62 ÷ 82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in a portal design and worktable with workpiece supports, for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutters - general milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded-in supports over the entire machine bed, making it extremely stable. The table design, with a large base, is the secret to ensuring lasting precision and stability. The machine layout enables the user to have an optimal workflow with a minimum of space requirements. The mobile portal beam is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via ball screw slides. On this mobile aggregate carrier, the working aggregate is in turn attached to prismatic, ground guides and ball screw slides. AXIS MOVEMENT The displacement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and fast positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the work unit along the moving portal (Y and Z axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by the high-quality drives and brushless motors, which are designed to achieve a speed of up to 90 m/min while maintaining the best surface finish. CONTROL The control unit consists of a numerical control for the milling and drilling machine with "Xilog Maestro" graphical user interface on a Windows 7 operating system - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine operating interface with Xilog Maestro software Xilog Maestro Features Programming - parametric graphical programming - Import of DXF files (2D; the geometries "SPLINE", "POLYLINE 3D", lines or circle interpolation in three axes, linear in space, spiral in the selected plane - supported programming with graphics and syntax aids for drilling and milling operations - automatic optimization of drilling operations and tool changes - cycles - possibility of panel zero-point shift to perform drilling on inclined or curved panel sides Kdodsy Dta Sjpfx Adqer

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Kdjdpjzaqlisfx Adqer Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Kdedper Hr Arefx Adqsr Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, full steel floor, parabolic suspension +100 km/h Equipment: - 6 tie-down points - Electric pump - 5-stage cylinder Net price: €7,218.49 / Gross price: €8,590.00 Article number: CHM235331811.24 Technical data: • Brand: Hapert Trailers • Model: Cobalt HM-2 Ferro • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 335 x 180 x 40 cm • External dimensions (L x W x H): 468 x 186 x 109 cm • Loading height of the floor: 69 cm • Permissible total weight: 3,500 kg • Unladen weight: 976 kg • Payload: 2,524 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • New side wall hinges incl. welded-on hooks for securing a cargo net, etc. • Aluminum side walls with robustly installed locks • Aluminum side walls anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Possibility to attach tarpaulin frames, lattice extensions, side wall extensions or front wall extensions at all 4 corners • Cargo net hooks on hinge lower parts • Stable eccentric locks Kodpfx Aozu N Hgsdqedr • Full steel floor, 3 mm thick, hot-dip galvanized – extremely robust • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, allowing high point loads • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the floor • 6 tie-down eyes recessed inside the side edge (1000 DaN/kg) TÜV certified! • U-profile on the rear for easier positioning of the ramps • Ramp shaft prepared • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Removable remote control for electric hydraulics with spiral cable and battery status display • External battery charging socket for optional 230V charger • Parabolic axle from KNOTT • Shock absorbers for 100 km/h mounted • Parabolic axle for absolute driving comfort! • Reversing aid • KNOTT overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Kedpozlxp Sofx Adqodr Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.