Used Planing Bench for sale (3,972)

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Hedpjyatffefx Ampsl Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, length ca. 1500 mm width ca. 700 mm height over floor ca. 840 mm 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Hodpfeylcqbsx Ampsl Mobile on casters, casters can be lowered so that the table remains stable when working

Condition: used, length 1200 mm width 600 mm Hjdpfx Amsylcp Depol height 840 mm 6 St.

Condition: new, Year of construction: 2026, New! Magnets for positioning the sheets are integrated into the bending jaw. We have the machine in stock in Halver! Free delivery within 150 km. SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. YOUR competent partner for BENDING MACHINES. We can demonstrate the machines upon request, along with expert advice and professional training. We will advise you individually – according to your needs – and look forward to your inquiry. The ZGR2000/0.8 bending machine from Prod-Masz is available to try out on-site and take away immediately. Sheet clamping on this swing bending machine is also done via hand levers. Technical specifications: - Working width: 2140 mm - Sheet thickness: Steel up to 0.8 mm - Non-ferrous metals: 30% thicker sheet - Bending angle: up to 145° - Bending jaw: 15 mm - Clearance: 80 mm - Degree scale - Stop for preset bending angles - Sheet support - Front depth stop - Weight: approx. 175 kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request Accessories: Roller shear €350 All prices are subject to 19% VAT. CE certified Hodpfsyupldex Ampel Warranty: 12 months Collection is possible Shipping within Germany: €180

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm Hedpfx Aeyuplkjmpjl -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Hjdpfx Aelubw Iempol Delivery time: ex stock Waiblingen Beinstein

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Hedpfed Egc Asx Ampsl Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No reserve price – guaranteed sale to the highest bidder! Hedpfeyn H Hlex Ampol Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 950 mm Weight: 150 kg External reference: Pieper - Lot 75

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Contents: Various boring tools (manufacturer: EPPINGER) Thread cutting heads Arbor press (diameter: approx. 180 mm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1550 x 800 x 1500 mm Weight: 450 kg Hodpfx Aeyn Eg Djmpol External reference: Pieper - Lot 63

Condition: good (used), Working width 630 mm Working height 220 mm Motor output 4 kW Length of the planing table 2100 mm Hodoynnk Sepfx Ampol Number of knives 2 St. machine weight ab. 1200 kg

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed Hjdpjwd Szbefx Ampjl - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Hsdsdzqmhopfx Ampol Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: used, length 1500 mm Hsdpfxsyif U Uj Ampsl width 700 mm height 840 mm 3 St.

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement Hedof Axn Aopfx Ampsl The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Hedpsd Dc Unofx Ampol Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: new, Year of construction: 2026, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Hjdpfxsby Swhs Ampsl Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1962, x-travel 6300 mm y-travel 2200 mm workpiece height 1835 mm Table area 6000x1835 mm Rest 2 Side head 2 Hsdpfxeyqud Do Ampsl number of T-slots 7 T-slot - distance 240 mm T-slot - width 28 mm bed length 14650 mm column daylight 2075 mm feed 5-60 m/min workpiece weight 15000 kg weight of the machine ca. 55 t dimensions of the machine ca. 14,65x4,37x4,05 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), functionality: unexamined, drilling depth: 100 mm, rotational speed (max.): 4,500 rpm, table width: 220 mm, table length: 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the purchaser to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Spindle speed: 220 – 4,500 rpm Hjdpoynimbsfx Ampjl Drilling depth: 100 mm Table dimensions: 280 x 220 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 540 x 400 x 1,600 mm Machine weight: 300 kg External reference: Lot 1 / Training workshop

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm Hjdpfx Aeu N E Evjmpol internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: good (used), see pictures; optionally without vice, with fixed vice; with rotating vice and height adjustment available Hodpfxjha U Ndo Ampel Please ask if you are interested !

Condition: new, Year of construction: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment Hjdpfoxbzuvsx Ampjl 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Condition: new, Year of construction: 2026, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 65mm vice Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth indicator, electronic drilling speed indicator, Hsdpfxerif H Eo Ampol laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 16mm RPM RANGE 350-2400 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 90mm DISTANCE OF SHAFT FROM COLUMN 150mm DISTANCE OF SHANK FROM THE BASE 430mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 335mm COLUMN DIAMETER 60mm TABLE DIMENSIONS 240x240mm BASE DIMENSIONS 400x232 mm ENGINE POWER 700 W HEIGHT 910 mm WEIGHT U 46kg

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm Hsdpfx Ameyuw Rnopol 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm

Condition: good (used), functionality: fully functional, throat depth: 180 mm, overall weight: 65 kg, spindle speed (min.): 480 rpm, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Hedpfx Aew Ug Dqempjl Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration. Hedpfx Ajwy Uqwempol