Used Pipe Bending Machine | Dw75Nc for sale (65,972)

Condition: refurbished (used), Trenching machine The machine was completely overhauled approximately 1000 meters ago! Nodezcnxljpfx Abkowh I have videos that I could send to a phone number via WhatsApp!

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Nwjdpfx Abjya Iaqjksh Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Nwedpfx Ajw Dgi Tebkoh Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: new, pressure 28 t piston stroke 180 mm Nwedeqzmgqopfx Abksh diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm Njdskzg E Ajpfx Abkowh max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Scharringhausen round bending machine Nwedpeimmb Ijfx Abkoh Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Movie available!

Condition: used, functionality: fully functional, Pipe bending machine Manufacturer: Ercolina, Type: Top-Bender Technical data Manufacturer: Ercolina Type: TOP-BENDER Year of manufacture: unknown Bending capacity: Ø 64 x 4 mm Bending angle: 180° Weight: 135 kg Accessories - Blue tooling o R90 d42-1-1/4 o R67 d 1“ Nedpfszdf N Rjx Abkjwh o R100 d1-1/2“ - Copper tooling o 1 1/4“ (2x) o 1 1/2“ (2x) o 1“ (2x) All information without guarantee. A demonstration with the machine running can be arranged at any time in our showroom.

Condition: used, Year of construction: 2003, operating hours: 45,500 h, functionality: fully functional, overall weight: 22,000 kg, total height: 3,500 mm, total length: 17,000 mm, total width: 7,000 mm, punching force: 30 t, compressed air connection: 6 bar, workpiece weight (max.): 200 kg, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness steel (max.): 4 mm, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 mm with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500 mm. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Nwedpszdc Iqefx Abksh Always used for thin sheets, max. 2 mm. A tapping head TU6 is included, but it displays an error message.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Nedpfxevk Scgo Abkswh Location: from stock - available immediately -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls Nsdpozcpu Uefx Abkswh • Digital display for roll positioning All information without guarantee.

Condition: excellent (used), Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Nwodpfx Aezg Hccjbkeh Weight: 2,5 T

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Nedpjzfvvvsfx Abkjwh Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process Njdpfszgu Tisx Abkswh - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Nwsdpfx Abjglaq Ijksh Good condition.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm Nwedpfx Abezf Hkdekjh - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg Nwjdsqy E R Tspfx Abkeh BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Nwjdpfxjza Ahpo Abkoh Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Weight: 1,700 kg

Condition: good (used), - Capacity: 35 mm Nsdpfezcxyaex Abkjwh - Automatic and manual mode - 2 speeds - Foot pedal control - Emergency stop - 400V

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Nwodpfxozgua As Abkeh Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm Nwsdpsx Sr Dfsfx Abksh bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: excellent (used), horizontal bending machine Manufacturer: Stierli-Bieger Type: 120 SB DGSL Bending capacity for flat steel: 130 x 12 Pipe diameter up to: G-pipe 1 1/2 Nwodpjy Uc U Tsfx Abksh Pressing force: 12 tons Stroke length: 170 mm 380 volts 1.5 kW Year of manufacture: 1992 Transport dimensions: Length: 1100 mm Width: 750 mm Height: 1150 mm Weight: 420 kg

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Nwjdpfxey I U U So Abkjh Technical Data Sheet thickness: 1.25 mm Bending length: approx. 2030 mm

Condition: used, Year of construction: 2009, 1 unit horizontal bending machine KUNKEL MB10 Capacity: 10 tons, operating voltage: 400V, 1.1kW Color: as shown in the pictures, in accordance with the images and upon inspection Year of manufacture: 2009 Condition: used Njdjzclukepfx Abkjwh Location of the goods: production hall Payment method: prepayment by bank transfer Shipping: self-collection only from the Coburg location

Condition: used, Swivel bending machine HM, type KSM-5 / 2500 Manufacturer's No. 2004 / 3262, Year of manufacture 2004 Useful length 2520 mm Maximum sheet thickness 5 mm at 400 N/mm² Stroke of the upper ram 200 mm Adjustability of the bending ram 60 mm Motor power, upper ram 2.2 kW Motor power, bending ram 4 kW Mains connection 400 volts, 50 Hz - One-piece top beam 135° (installed) - Segmented gooseneck tool with mounting rail - Round tool for rounding up to 180° - Various bending tools for the bending ram - Adjustable bending angle via handwheel with clamping mechanism - Electric foot switches - Operating manual with electrical diagram available - Without rear stop Space requirement L x W x H 3900 x 1150 x 1560 mm Weight (machine) 4700 kg Weight (tools) 250 kg Nodjzbhuwspfx Abkowh In good condition

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Nwodpfxjy Shgpj Abksh Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.