Used Oli Semi-Automatic Case Packer for sale (30,099)

Year of construction: 2026, condition: new, functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Lhjdpfx Aohfdc Rjl Ijh Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1500 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell – €490.00

Condition: new, Model Name Shark 281 SXI evo Lsdpfxegvkgls Al Ishh

Condition: new, Model Name SHARK 331-1 NC 5.0 SPIDER Ledol Sva Ijpfx Al Ijhh

Condition: new, Model Name Shark 332-1 SXI evo Ljdpfx Asgvkafel Iohh

Condition: new, Model Name Lodogvkctopfx Al Iohh Shark 282 SXI evo

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Ljdjq Dzi Tspfx Al Iohh Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Lhedpfx Asw H Naasl Ish Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: new, Year of construction: 2026, Semi-automatic piston fillers, 50 ml - 1,300 ml Stainless steel cylinder Tabletop unit Pneumatically/volumetrically controlled dispensing unit Special 3-way valve for viscous or chunky products Lhsdpfxjib A Ips Al Ijh Up to 600 units/hour, depending on product, fill volume, and operator Fill volumes: 0 - 38 ml, 2 - 100 ml, 20 - 680 ml, 50 - 1,300 ml

Condition: new, Year of construction: 2026, semi-automatic labeling machine FL-100 Labeling machine FL-100 Product diameter: 15 – 130 mm Label width: 15 – 200 mm Label length: 15 – 600 mm Roll diameter: 300 mm Core diameter: 38 – 110 mm Dispensing speed: 4 – 20 m/min Supply voltage: 230 V / 50 Hz Weight: Approx. 36 kg Dimensions: 800 (L) x 500 (W) x 400 (H) mm Lsdpfsfnkbrox Al Ijhh

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Lhjdpfjy Tipnjx Al Ijh Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3589 Manufacturer: de Wit Lodpsya Iu Iefx Al Iehh Type: WP 2 Year of manufacture: 2007 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Net weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * Inclusive ramp!!!

Condition: excellent (used), Automatic pallet wrapper Ref. no. 3793 Manufacturer: PME Model: PME 35 * Turntable positioning via fixed stop * Number of bottom and top wraps adjustable * Turntable diameter: 1650 mm * Maximum wrapping height approx. 2400 mm Lsdpjyc Exijfx Al Iehh * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp optional * Very good condition

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Lhjdpfofiulfox Al Ieh We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Lodpofiliwefx Al Ijhh

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, MC100 – Capsule Loader / Filler Semi-automatic filling machine model MC 100 for hard gelatin capsules with 100 holes, enabling the production of up to 3,200 capsules per hour. The machine consists of a loader and a filler, both mounted on a separate base. The machine is supplied complete, including a powder pressing device and an electromagnetic vibrator to ensure uniform distribution of powder into the capsules. The machine is equipped with one capsule format, selectable between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5 and DB Caps can also be supplied. Technical data: Single base Machine dimensions: 650 x 380 x 410 mm Net weight: 30 kg Lodpoyktzujfx Al Ishh Electrical connection: 1 Ph. 230 V, 50 Hz.

Condition: new, Fastech Horizontal Double Miter Bandsaw, Semi-Automatic Lhodpfx Alohpil Es Ieh BMSY 440 DGH Round cutting capacity: mm 440 Flat cutting capacity: mm 610 x 440 Square cutting capacity: mm 440 +30° Round cutting capacity: mm 400 +30° Flat cutting capacity: mm 500 x 440 +30° Square cutting capacity: mm 440 +45° Round cutting capacity: mm 440 +45° Flat cutting capacity: mm 410 x 440 +45° Square cutting capacity: mm 410 +60° Round cutting capacity: mm 320 +60° Flat cutting capacity: mm 250 x 440 +60° Square cutting capacity: mm 250 -30° Round cutting capacity: mm 440 -30° Flat cutting capacity: mm 500 x 440 -30° Square cutting capacity: mm 410 -45° Round cutting capacity: mm 410 -45° Flat cutting capacity: mm 410 x 440 -45° Square cutting capacity: mm 410 -60° Round cutting capacity: mm 320 -60° Flat cutting capacity: mm 285 x 440 -60° Square cutting capacity: mm 285 Motor power, main drive: kW 3 Hydraulic pump power: kW 0.55 Motor power, coolant pump: kW 0.12 Band speed: continuously variable m/min 20 - 100 Saw band dimensions: mm 5200 x 34 x 1.1 Height of the work surface: mm 860 Weight: kg 1540 Length / Depth / Height: mm 2800 / 1210 / 1870 Double miter saw Continuously variable band speed Hydraulic clamping device, sensitive cutting pressure adjustment High-performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for the miter angle

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic BMSY 320 DGH Saw band dimensions: 4160x34x1.1 mm Band speed: 20 - 100 m/min, continuously variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm Cutting capacity -30°: round 320 mm, square 320 mm, rectangular 420x320 mm Cutting capacity -45°: round 320 mm, square 320 mm, rectangular 340x320 mm Cutting capacity -60°: round 240 mm, square 220 mm, rectangular 230x220 mm Working height: 860 mm Coolant pump motor: 0.12 kW Hydraulic motor: 0.37 kW Motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Double miter saw Ledpfxjg Ekp No Al Iohh Continuously variable band speed Hydraulic vise High-performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for the miter angle

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic, BMSY 360 DGH ECO Round Cutting Capacity mm: 360 Flat Cutting Capacity mm: 510 x 360 Lsdjg Ekttspfx Al Ishh Square Cutting Capacity mm: 360 +30° Round Cutting Capacity mm: 360 +30° Flat Cutting Capacity mm: 440 x 360 +30° Square Cutting Capacity mm: 360 +45° Round Cutting Capacity mm: 360 +45° Flat Cutting Capacity mm: 390 x 360 +45° Square Cutting Capacity mm: 360 +60° Round Cutting Capacity mm: 200 +60° Flat Cutting Capacity mm: 200 x 360 +60° Square Cutting Capacity mm: 200 -30° Round Cutting Capacity mm: 360 -30° Flat Cutting Capacity mm: 440 x 360 -30° Square Cutting Capacity mm: 360 -45° Round Cutting Capacity mm: 360 -45° Flat Cutting Capacity mm: 390 x 360 -45° Square Cutting Capacity mm: 360 -60° Round Cutting Capacity mm: 260 -60° Flat Cutting Capacity mm: 260 x 360 -60° Square Cutting Capacity mm: 260 Motor Power, Main Drive kW 3 Hydraulic Pump Power kW 0.37 Motor Power, Coolant Pump kW 0.12 Band Speed, stepless: m/min 20 - 100 Saw Band Dimensions mm: 4800 x 34 x 1.1 Height of Work Surface mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double Miter Saw Stepless Band Speed Hydraulic Vise High-Performance Gearbox Hydromechanical Saw Band Tensioning Saw Band Brush Digital Display for Miter Angle

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle Lsdpspa Nxdefx Al Iehh 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Lhedpfeidun Djx Al Ijh Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its ease of use, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA has a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is automatically activated by pressing a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard with this machine! Connections for a chip extraction system are also available on this machine. Equipment: • Precision under-table circular saw Lodsgwt Rrjpfx Al Ijhh • Miter adjustment: left 45º / 90º / right -45º • Incl. 2 pneumatic clamping cylinders (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Extraction device - chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade 350mm • Saw blade not included! You can visit our production facility/showroom at any time to view the desired system. Please feel free to contact us for this purpose. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Ledpogwt Rnefx Al Iohh • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm Lsdpfx Alsgwt Ryo Iohh • Saw blade not included!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Ljdpfjgcbwgox Al Iohh

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose Ljdpfxegwt R Do Al Iehh • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.