Used Octopus Checkweigher & Labeller Automatic 6Kg for sale (23,234)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm Laedpfezuzw Djx Afkef The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control Laodezuzbcopfx Afkof - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. Laedpfxjzuymke Afksf - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, Ljdpfxemu Rtuo Afkoaf machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: used, mileage: 165,203 km, power: 213 kW (289.60 HP), first registration: 07/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - Air conditioning - Webasto heater = Further information = Damages: none = Company information = Ledpfxozux Sxe Afksaf We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring an extensive parking area serving as our showroom. We always have a large selection of buses in stock—various brands, capacities, models, and price ranges. We can find the right touring coach, school bus, or city bus tailored to your requirements or budget. All information is provided without guarantee. Subject to errors, prior sale, and typos. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Laodsw Enqujpfx Afkef Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm Ledpozuygqefx Afkjaf • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information Lasdeyy Nnqspfx Afkof VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Ledpfxezil S Io Afkjaf Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Laodpfxozil Sue Afkjf Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Manufacturer - EME. Serial Number - 15066. Date of manufacture - 2015. Lsdpoy Hkqyefx Afksaf Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V Ljdot Tqlbjpfx Afkjaf total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: used, Year of construction: 2005, Giardina single-arm automatic reciprocating spray machine for the automatic application of stains, primers and lacquers to timber and flat panels. Manufactured by Giardina Officine Aeromeccaniche S.p.A. (Figino Serenza, Italy) and supplied/integrated by Mared (Sweden). Suited to a timber coating shop, joinery or panel-finishing operation. Laodpozlzfpofx Afksf Used, ex-production machine. Sold as seen. Collection: (CH62 3QD). Collection only — the buyer is responsible for disconnection, dismantling, loading, rigging and transport. Assistance with loading available on site by arrangement.

Condition: used, This listing is for Cedrex Fluid X - xtl - CMTL-96 Mark 111 Automated Tube Labeler The unit is in full working condition and ready for immediate use This automated tube labeler is a high-quality lab instrument manufactured by Cedrex (Model: Fluid X - xtl - CMTL-96 Mark 111). Streamlines sample tracking by rapidly and accurately applying durable labels to sample storage tubes. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Lasdpfxozqf Eko Afkof Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Manufacturer - Sorma Group. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Lasdpfx Afjt Evzrekjf Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. Ljdpfjdzp T Njx Afkjaf The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Lodszquywjpfx Afkjaf Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Automatic lathe Manufacturer: STROHM Ljdpfxoyllr Ij Afkeaf Model: M125

Condition: used, Year of construction: 2004, Technical details: Laodpfszu St Nox Afksf Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h No. of washing chambers: 1 No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. Laedpfoiphikjx Afkef You are cordially invited to inspect the machine at our facility after prior appointment.

Condition: used, Year of construction: 2012, operating hours: 31,800 h, functionality: fully functional, CNC long-turn lathe Manufacturer: STAR Type: SR-32J Year of manufacture: 2012 Ljdpfjzu I Agox Afksaf with: FANUC 32i control system Back-end machining Synchronous spindle Powered tools C-axis Chip conveyor Parts conveyor belt Oil mist extraction system Fire extinguishing system Bar loader magazine FMB TURBO 3-36

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement ! Laodpjzr H D Rofx Afkof

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day Lajdpfx Aezr H Dwsfkef For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Lasdpfjzr H Dkjx Afkef A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Ljdszr H A Tepfx Afksaf The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !