Used Nedcon Heavy-Duty Shelf for sale (6,111)

Condition: good (used), 4000 Insert grid 128 x 79.5 x 3cm Used goods, very good condition, see pictures. Support bar height 30 mm Support bar thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiated price: € 25,-- net per piece Price from 70 pieces 22.50 net per piece, larger quantities on request! Redpfx Afjrxtd Tonet 35 pieces per pallet Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), Push-through safety devices Jungheinrich MPB Used goods, good condition, see pictures Length: 2,780mm (for clear bay width of 2,700mm) Profile: 52x42mm (WxH) Hole spacing: approx. 2.735mm Hole diameter: 9mm Weight: 7.5kg / pc. Color: yellow Incl. 2 pcs. brackets / piece Price / piece: € 20,-- net from stock Rsdpfxeq Evi Se Afnot Offer consists of: + 1 profile L=2.780mm + 2 pcs. brackets and small material Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: used, 140 running meters of Bito P5 pallet racking Used goods in very good condition, see pictures. Height 6 m depth 110 cm, galvanized Field load 16000kg Beam length 3.6 m blue Beam with load / compartment 4000 kg Negotiated price: € 15.500,-- net ex stock Offer consists of: Rjdpfjtucx Hjx Afnst + 39 pre-assembled frames, depth 110 cm, height 6 m + 304 beams, length 3.6 m, 4000 kg load per compartment + 608 pcs. suspension locks + 156 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Further accessories such as clamping plates, inlay grids etc. on request. Load-bearing plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, 318 running meters of Bito P5 pallet racking Used goods in very good condition, see pictures. Height 9 m depth 110 cm, galvanized Field load 16000kg Beam length 3.6 m blue Beam with load / compartment 4000 kg Negotiated price: € 36.950,-- net ex stock Offer consists of: + 87 pre-assembled frames, depth 110 cm, height 9 m + 688 beams, length 3.6 m, 4000 kg load per compartment +1376 pcs. suspension locks + 348 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Further accessories such as clamping plates, inlay grids etc. on request. Load-bearing plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Redotut Iqjpfx Afnet Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: like new (used), 7500 Shelf inserts for Schäfer EF 6420 crate Used goods, very good condition, see pictures length 52,5cm width 35,5cm height 2,5cm Bargaining price: € 0,50 net from stock from 100 pieces Larger quantities on request! Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Rodpfxjr Ey Dys Afnst Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), Without frames, only beams: Beams 3600*110 mm 467 pcs 22 EUR Beams 3600*120 mm 432 pcs 23 EUR Beams 3600*130 mm 20 pcs 24 EUR Beams 3600*150 mm 8 pcs 25 EUR Total for all beams: 18,540 EUR If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and we are happy to assist you with your planning. Rsdpspu Acfefx Afnot Further accessories available, e.g.: Frames, corner and collision protection, push-through guards, chipboards, grating, mesh rear panels, depth supports. Shipping: Please inquire about shipping costs, stating your postcode, location and the required quantity of items. Additional services: Planning, installation/dismantling of racking, purchase/sale Technical data, specifications and prices are subject to change and prior sale!

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, load capacity per storage section: 1,500 kg, total length: 2,800 mm, total height: 3,000 mm, total width: 2,250 mm, load capacity: 10,500 kg, carrying capacity per cantilever arm: 500 kg, overall weight: 1,120 kg, number of shelf rows: 6, Shelves for storing heavy sheets in metal, wood or stone Redpfx Afoxm S Aujnjt

Condition: new, Year of construction: 2025, Pallet racking, 2 – 7 m high, crossbeams/traverses available in lengths of 1.80 m / 2.70 m / 3.60 m, 1,000 kg per pallet – Brand New – Prices ex works / per unit (net)! Sale / Transport from Serbia is only practical if your order volume fills a full or nearly full truckload! Delivery times upon request. CE certification available Frame depth: 1.10 m Frame bracing: bolted Location: Serbia Frames: Redpeu Spu Tjfx Afnet NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Vertical frame 2000*1100 2.00 30.00 €46.50 2 Vertical frame 2500*1100 2.00 37.50 €58.00 3 Vertical frame 3000*1100 2.00 45.00 €70.30 4 Vertical frame 3500*1100 2.00 52.50 €82.70 5 Vertical frame 4000*1100 2.00 60.00 €93.00 6 Vertical frame 4500*1100 2.00 67.50 €105.40 7 Vertical frame 5000*1100 2.00 75.00 €117.75 8 Vertical frame 5500*1100 2.00 82.50 €128.20 9 Vertical frame 6000*1100 2.00 90.00 €140.50 10 Vertical frame 6500*1100 2.00 97.50 €152.90 11 Vertical frame 7000*1100 2.00 105.00 €164.30 Beams: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Beam 150*50*3600 2.50 29.60 €46.00 2 Beam 120*40*2700 2.00 15.50 €24.40 3 Beam 120*40*1850 2.00 11.10 €17.90

Condition: not inspected (used), functionality: unexamined, total length: 2,700 mm, total height: 2,400 mm, total width: 600 mm, overall weight: 200 kg, No reserve price – guaranteed sale to the highest bidder! By bidding, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Dimensions of storage surface: 2,600 x 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 600 x 2,400 mm Rjdpfx Aey D Sbhofnet Weight: 200 kg External reference: 19

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Rsdpfx Afjy D Rn Tjnjt Shelf dimensions: 2,700 x 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,200 x 2,000 mm Weight: 250 kg External reference: 1

Condition: like new (used), Year of construction: 2024, functionality: fully functional, overall weight: 70 kg, Sturdy, custom-built robot pedestal designed for Universal Robots UR10 (robot not included). Constructed from high-quality steel profiles, providing exceptional stability and durability. Dimensions: 1000 × 1000 × 480 mm Weight: ~70 kg Rodpfjy Iccdox Afnjt Material: Steel Condition: Very good, like new Mobility: Equipped with lockable caster wheels for easy repositioning Top Mount: Designed for UR10, but the top plate can be easily swapped for other setups Handles: Integrated handles for safe handling and transport Location: Budapest, Hungary Perfect for industrial, R&D, or production environments requiring a solid and mobile base for robotic applications. Shipping on EXW basis (but we can help with shipping if requested). Price exludes VAT.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Rodswhylvjpfx Afnet Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Rodpjv D Uhfjfx Afnot Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Redpfxsy Amg Ao Afnst Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Rodpfxsyx Hw Tj Afnst Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Redpfeh U Rzgox Afnjt Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, machine/vehicle number: XL9T0N30004415020, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2005, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Rodpfxjymbg Rj Afnet Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.370 kg Carrying capacity: 38.630 kg GVW: 45.000 kg Registration number: OJ-20-BV

Condition: used, machine/vehicle number: XL9T0N30074415040, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2007, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2007, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Redpfxsx Ihhfs Afnot Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OJ-34-ZH

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Rjdpfx Ajr Ikvmofnjt Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: used, mileage: 370,777 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: air conditioning, MAN 33.500 TGS 6x4 First registration: 04/2017 * Automatic transmission * Unladen weight: 9,725 kg * Wheelbase: 3,250 mm * German registration Inspection possible at any time during our opening hours, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of arrival. Company logos or advertising logos on the vehicles may have been digitally altered on the photos. No guarantee is given for the functionality of the extras. Rsdpfx Asy E U Iaefnjt All information provided without warranty - subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and make sure you are familiar with them.

Condition: excellent (used), mileage: 534,062 km, power: 537 kW (730.12 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, - Alarm - Aluminum fuel tank - Roof spoiler - High beam Rsdoyx Acfopfx Afnot - Low noise - Speed limiter - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air horn - Particulate filter - Radio/CD - Reversing camera - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Power take-off (PTO) SCANIA S730 V8 NGS | 8X4 | Heavy-duty 180Tons | 534,062 km | 2020 | Hydraulics | Retarder | Full air suspension | Sliding fifth wheel | King of the road | Leather seats | Heated/cooled seats | Stationary air conditioning | Navigation system | Reversing camera | Refrigerator | Sleeper cab | Air conditioning | ACC | Cruise control | Semi-automatic transmission | Euro 6-D | TÜV/MOT/APK 02-2027 | Belgian truck *Heavy-duty truck direct from Scania factory* Chassis number: YS2S8X40002169225 EXPORT Transport by truck: Austrian transit license plates with insurance for 21 days + €550 Transport by ship: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about the truck: Video of the truck (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from erroneous information in the advertisement. Geerts Trucks & Trailers always strives to provide correct information. Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: ALBOURGH; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Rear axle 2: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: DEBICA; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Weights Unladen weight: 12,828 kg Payload: 29,052 kg Gross vehicle weight: 41,880 kg Interior Upholstery: Leather Maintenance, History and Condition APK (main technical inspection): valid until 02.2027 Technical condition: very good Optical condition: very good...

Year of construction: 2009, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm Redpfxol Tuu Ds Afnet -Empty weight: 300 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering Rodpfjxuqipsx Afnet -Platform: 5280/1325/H820 mm / 790 mm extendable to 6070 mm -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Dimensions when retracted: 7120/1325/H820 mm -Weight: 1760 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Rjdpfx Afey Id U Ujnjt Turning length: 10,000 mm Bed width: 1,120 mm Speed range: 1.4 - 280 rpm Max. torque (approx.): 20,000 Nm Workpiece weight between centers, max.: 10,000 kg with 1 steady rest / follower rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Chip conveyor: KABELSCHLEPP Chuck guard The machine comes from first ownership, is free from defects, and is in very good condition. In 2023, the headstock was overhauled; among other things, the main spindle bearings were replaced and the main spindle and bull gear (bearing seat) were hard-chromed and reworked. The guideways are also in very good condition for its age.

Condition: new, 20000 kg Redpfx Afjvn Ux Eonst length 6000 mm width 2450 mm height 697 mm lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.