Used Multitouch Display 6Av7240-0Hc07-0Pa0 for sale (7,119)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 516 h, machine/vehicle number: A300057584, load capacity: 200 kg, platform length: 700 mm, platform width: 1,050 mm, overall weight: 4,900 kg, working height: 12,650 mm, TECHNICAL DETAILS Working height: 12.65 m Lateral outreach (standard platform): 6.05 m Up-and-over height: 7.12 m Slew range: 345° Platform capacity: 200 kg Articulated jib length: 4.14 m Jib movement range: 120° (+60° / -60°) Platform size (L × W, standard platform): 0.70 × 1.05 m Platform width: 1.20 m Tail swing: 13 cm Transport height: 1.99 m Transport length (standard platform): 3.65 m Wheelbase: 1.60 m Ground clearance: 10 cm Max. permissible ground pressure: 14.0 kg/cm² Njdpfxsyzrg Ss Aaaola Travel speed, stowed: 6.0 km/h Outside turning radius: 2.60 m Inside turning radius: 0.75 m Gradeability: 30% MACHINE DETAILS Machine weight (standard platform): 4,900 kg Tyre size (non-marking): 457 × 178 mm Operating voltage: 48 V DC Batteries (Deep Cycle): 48 V – 260 Ah Charger: On-board 110 V / 230 V HF Drive motors: 2 AC motors Electric motor (hydraulic pump): 3.5 kW – 48 V DC Hydraulic oil capacity: 15 l EQUIPMENT Steel platform Sliding bar at rear entrance Proportional drive and slew control via joystick with integrated thumb steering switch Mini joysticks for proportional boom, telescope, and jib operation Large platform console with function enable Load sensing system AC power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge cut-off function On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Lashing and lifting lugs Ground control selector switch with key lock Battery discharge indicator Hour meter Horn Direction orientation system Anchor points for safety harnesses Manual descent system Passive pothole protection system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 67 h, machine/vehicle number: C170003922, load capacity: 230 kg, platform length: 1,340 mm, platform width: 690 mm, overall weight: 2,840 kg, working height: 20,050 mm, TECHNICAL DETAILS Working height: 20.05 m Outreach (standard platform): 9.70 m Platform capacity: 230 kg Up-and-over clearance at 230 kg: 8.20 m Slew range: 360° Articulating jib length: 1.68 m Articulating jib movement range: 89° (+0° / -89°) Basket rotation: 124° (+/-62°) Maximum ground clearance (retracted/extended): 0.79 / 1.09 m Platform size (standard, 2 persons): 0.69 × 1.34 m Platform size (narrow, 1 person): 0.60 × 0.78 m MACHINE DETAILS Transport width (with standard platform): 1.34 m Stowed width (without platform): 0.80 m Stowed height (on tracks): 2.00 m Stowed length (on tracks): 5.00 m Stowed length (on tracks, without basket): 4.40 m Stabilizer footprint: 2.92 × 2.93 m Nedpfx Asyzrfzsaasla Machine weight (with standard platform): 2,840 kg Climbing ability: 28.7% Maximum permissible working angle: 15° Maximum approach/departure angle (front/rear): 20° / 21° Maximum ground pressure (with outriggers): 3.10 kg/cm² Travel speed (single speed nc/petrol): max. 1.1 km/h EQUIPMENT Aluminum platform Rear sliding entry Foot pedal Fully proportional controls Articulated arm Remote control by cable to platform Fully remote-controlled drive and stabilization functions Multilingual LCD display at platform console Position sensor and console locking Load monitoring system for the work platform Platform with easy removal or exchange Engine protection Rubber tracks Cylinder protection for stabilizers Automatic shut-off when not level Electronic drive management system Electrohydraulic controls Fully proportional hydraulic control Lifting and lashing eyes Forklift pockets

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 128 h, machine/vehicle number: A300063328, power: 3 kW (4.08 HP), overall weight: 2,600 kg, maximum load weight: 200 kg, pivoting range: 345 °, working height: 10,100 mm, TECHNICAL DETAILS Working height: 10.10 m Lateral outreach (standard platform): 3.38 m Up-and-over height: 6.51 m Slew range: 345° Platform capacity: 200 kg Articulating jib length: 1.60 m Articulating jib movement range: 126° (+69°/-61°) Platform size (L × W): 0.70 × 0.90 m Platform width: 0.99 m Max. permissible ground pressure: 19.7 kg/cm² Drive speed, stowed: 5.5 km/h External turning radius: 1.99 m Internal turning radius: 0.55 m Climbing ability: 25% Ground clearance: 0.10 m MACHINE DETAILS Tire size (non-marking): 406 × 125 mm Operating voltage: 24 V DC Batteries (AGM): 24 V – 260 Ah Charger: 24 V – 27 A Drive motors: 2 AC motors Electric motor (pump): 3 kW, 24 V DC Hydraulic oil volume: 7.5 l Dimensions & Weight Transport length: 2.82 m Transport width: 1.20 m Transport height: 1.99 m Machine weight (standard platform): 2,600 kg EQUIPMENT Steel platform Sliding bar at rear access Proportional drive and slew control via joystick with integrated thumb steer switch Mini joysticks for proportional boom and articulated jib lift functions Load monitoring system Mains power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge automatic cut-off Nsdpfx Aoyzq Axoaajla On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Passive pothole protection system Tie-down and lifting eyes Ground controls selector switch with key lock Battery discharge indicator Operating hours counter Horn Drive orientation system Anchor points for safety harnesses Xenon strobe beacon Manual lowering system

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386J08866, Year of construction: 2018, operating hours: 4,387 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 1,500kg Duplex 314cm Electric Forklift, 4,387 hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 3,140 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 4,387 h Mast type: Duplex Nljdpfx Aoyzf Ipjaaea Drive: Electric Battery: 13/08/2018 24V 8PzS 1000Ah, measured at 24.6V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Ex-Linde full-service machine Facelift model with tilt angle display 3rd valve, side shifter Front LED work light Rear LED work light Rear safety light Comfort seat All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side possible up to 5 t with large onsite forklift at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. A mast that is too high for transport can be dismantled on request. If not collected within the agreed time, a storage fee of €20 per machine per day will apply (payable prior to collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X387V01167, Year of construction: 2019, operating hours: 5,494 h, load capacity: 3,000 kg, lifting height: 3,495 mm, free lift: 150 mm, DGUV certified until: 02/2027, fork length: 1,200 mm, Equipment: UVV, Service + UVV valid until 02/2027, 3,000 kg 3rd + 4th fork positioner, electric forklift, fork truck, 5,494 hours No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,495 mm Overall height: 2,424 mm Fork length: 1,200 mm Free lift: 150 mm Operating hours: 5,494 h MACHINE DETAILS Mast type: clear view Drive: electric Dimensions & Weight Dimensions (L x W): 3,900 x 1,300 mm Weight: 5,200 kg Battery: 11/2019, 80V 5PzS 625Ah, excellent performance measured at 83.3V Operating hours: 5,494 h EQUIPMENT Former Linde full-service unit Service valid until 02/2027 UVV inspection valid until 02/2027 Integrated charger Clear view mast without center hydraulic cylinder 3rd and 4th valve Fork positioner with side shifter Nodpfx Aajyzf E Ioajla Full cabin with heating and windscreen wiper Facelift model with tilt angle display (very practical for sensitive goods) All dimensions are approximate. No liability is assumed for writing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 tons is possible with a large forklift on site at your own risk. Collection only with email payment confirmation! Pickup WITHOUT prior registration Monday to Friday, 7:00–16:30. A mast that is too high for transport can be dismantled on request. If not collected on time, a storage fee of €20 per machine per day will be charged (payment due before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X387J04185, Year of construction: 2018, operating hours: 12,087 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,500 mm, DGUV certified until: 02/2027, fork length: 1,600 mm, Equipment: UVV, UVV 02/2027 2,500kg Triplex 3rd & 4th Fork Positioner Electric Forklift Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 4,760 mm Overall height: 2,176 mm Fork length: 1,600 mm Nedpfx Aaoyzf Ayeasla Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex with full free lift Drive type: Electric Dimensions & Weight Dimensions (L x W): 4,100 x 1,250 mm Weight: 4,800 kg Drive type: Electric Battery: 14/09/2018, 80V 575AH, very good performance measured at 84.3V Operating hours: 12,087 h EQUIPMENT Ex-Linde full-service machine Service valid until 02/2027 UVV valid until 02/2027 3rd & 4th valve; fork positioner with side shift Fully enclosed cab with heater and windscreen wiper Facelift model with tilt angle display All measurements are approximate values. No liability is assumed for typographical or measurement errors. PICK-UP CONDITIONS Side loading up to 5 t possible with a large onsite forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. Mast can be dismantled for transport on request if too tall. If collection is not made within the agreed period, a storage fee of €20 per machine per day will be charged (the additional payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X394V02886, Year of construction: 2019, operating hours: 15,499 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, Service + UVV 02/2027 5,000 kg 3rd & 4th Valve Fork Positioner Forklift LPG Forklift No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,870 mm Fork length: 2,400 mm Free lift: 150 mm MACHINE DETAILS Mast type: Freisicht (Clear View) Drive type: LPG (liquefied petroleum gas) Dimensions & Weight Dimensions (L x W): 5,500 x 1,450 mm Weight: 7,500 kg Nedpfxoyzf Ame Aaaela Operating hours: 15,499 h EQUIPMENT • Ex-Linde full-service machine • Next service due in 858 operating hours • Safety inspection (UVV) valid until 02/2027 • Facelift model with tilt angle display (practical for sensitive goods) • 3rd & 4th hydraulic valve • Fork positioner with sideshift • Full cabin with heater and windscreen wiper • Comfort seat with lumbar support and seat heating • LED work lights front and rear • Blue safety light at rear Note: Dismantling of the mast can be optionally offered by the seller for €950 net. All dimensions are approximate. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 tons is possible with a large forklift on site at your own risk. Collection ONLY with an email confirming payment receipt! Collection WITHOUT prior appointment possible Monday to Friday, 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled on request. In the event of delayed collection, a storage fee of €20 per machine per day will be charged (payment required before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V00612, Year of construction: 2019, operating hours: 13,018 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, DGUV certified until: 02/2027, fork length: 1,200 mm, Equipment: UVV, Service + UVV until 02/2027 LI-ION Lithium 1,400kg Duplex Free lift Electric Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 3,145 mm Overall height: 2,150 mm Fork length: 1,200 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions (L x W): 3,000 x 1,100 mm Weight: 3,200 kg Battery: 10/01/2019 48V 268Ah, very good performance – measured at 52.3V Operating hours: 13,018 h EQUIPMENT • Former Linde full-service unit • Service valid until 02/2027 • UVV valid until 02/2027 • Facelift model with tilt angle display (very useful when handling sensitive goods) • Duplex mast with full free lift • 3rd hydraulic valve • Side shifter • Load backrest (can be easily removed) • Lateral fall protection (can be easily removed) • LED work light front • LED work light rear • Safety light rear • Comfort seat Nedpfx Aoyzfzpsaaola All dimensions are approximate. Errors in specifications and measurements are excepted. COLLECTION CONDITIONS Side loading up to 5 tons possible on-site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be dismantled on request. In case of non-collection within the specified period, a storage fee of €20 per machine per day will be charged (payment must be made prior to collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H21279V00104, Year of construction: 2019, operating hours: 15,226 h, load capacity: 7,000 kg, lifting height: 5,250 mm, free lift: 150 mm, fork length: 2,000 mm, 7,000kg S+UVV 02/2026 Electric Forklift Truck 3rd & 4th Valve No reserve price – guaranteed sale to the highest bidder! TECHNICAL SPECIFICATIONS Load capacity: 7,000 kg Lift height: 5,250 mm Overall height: 3,780 mm Fork length: 2,000 mm Free lift: 150 mm MACHINE DETAILS Mast type: Clear-view Drive type: Electric Dimensions & Weight Dimensions (L x W): 6,000 x 1,700 mm Weight: 13,500 kg Battery: Hawker Ironclad 80V/8PzS/1376Ah (measured 82.35V) Operating hours: 15,226 h EQUIPMENT Ex-Linde full-service machine UVV inspection valid until 02/2026 Service valid until 02/2026 or up to 1,000 operating hours Clear-view mast without central hydraulic cylinder Full cab with heating, air conditioning, and wipers Facelift model with tilt angle display 3rd & 4th valve Note: The forklift is sold without side shift (internal width 22–172 cm). Dismantling of the mast can be optionally offered by the seller for €950 net. All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t is possible onsite with a large forklift at your own risk. Collection ONLY upon receipt of payment confirmation via email! Nlodoyzfu Njpfx Aaaja Collection WITHOUT prior notice possible Monday to Friday 7:00–16:30. A high mast can be dismantled for transport on request. If not collected on time, a storage fee of €20 per machine per day will be charged (to be paid before collection).

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital display of travel distances! TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Table size: 950 mm x 950 mm MACHINE DETAILS Nsdpfx Aaoy Emq Tsaola Weight: 10,000 kg EQUIPMENT Accessories shown in the photos, including tools, tool cabinets, and clamping devices

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Nljdpfxsy Edgfj Aaaea Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Condition: new, Year of construction: 2022, Ex College A1 Condition - Unused Worktable size 1200 x 700mm Useable spindle height 140mm Max spindle protrusion above the table 190mm Spindle rotation speeds 1300 / 2500 / 3500 / 5000 / 6000 / 8500 rpm. Nljdpfx Aaoy Efvhsaea Max size of tool retractable under the table 320 x 50mm Main motor power 5.5hp Spindle tilting range -5 to +45 degrees 11/4" dia fixed spindle Adjustable fence max tool dia 250mm Mechanical readout and hand wheel for total fence displacement Mechanical readout and hand wheel adjustment for right infeed fence Dust extraction point on hood 120mm Dust extraction point on rear of machine frame 120mm Gravitational display for tilting angle of the spindle - adj by hand wheel Power rise / fall of spindle with decimal height readout Safety interlock on door Safety microswitch on fence assembly Key locking master switch Electromagnetic spindle brake LED light display for spindle speed setting Emergency stop button Pre arrangement (electrically) to accept a power feed unit (Feeder extra cost) Left and right table extensions 200mm total overall length with frontal retractable support bar

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW Nodpfxsyw I Hms Aaaela • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Nljdpfey D Smwox Aaaea Make: Bystronic Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,300 kg, type of input current: AC, sheet thickness aluminum (max.): 3,200 mm, warranty duration: 12 months, input voltage: 240 V, input current: 60 A, total width: 6,050 mm, total length: 1,500 mm, total height: 1,500 mm, We are offering for sale a GZH32KM heavy-duty UV roll-to-roll printer, built for high-volume production and consistent output quality across a wide range of large-format applications. Nlodpfoy D Uamjx Aaasa This is a 3.2 metre industrial machine, ideal for signage, POS, exhibition graphics, and general wide-format print environments. 🔹 Key Features 3200mm (3.2m) print width Konica Minolta 1024A printheads High-speed production (up to approx. 108 m²/hr) UV curing system for instant drying Dual roll capability Mesh kit compatible Built for continuous industrial operation 🔹 Applications Banners POS & retail graphics Exhibition displays Mesh & soft signage General large format print 🔹 Condition Fully operational "as new" Currently in production environment Available for inspection (UK) and demonstration in Leicester, UK. Complete with 12 months Warranty and UK Installation Price £96,000 + VAT We also sell inks for the machine Colours - £55 per ltr White - £63 per ltr

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Nedeylnybjpfx Aaaela Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab Star M The unit is in full working condition and ready for immediate use This Unit is supplied with: - PC With Software - Thermo Scientific Haake A25 Heating and Cooling Water Bath and SC100 Circulator - ODTC Power and Control Unit - Hamilton Heater and Shaker Box - Spare Parts and Consumables (please see pictures) - Original Manuels and Guides Nledpjy Eyqysfx Aaasa A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: Nlsdpfx Asy Ex Uqjaaoa • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for Pfeiffer MVP020 Vacuum Pump (MVP020) The unit is in full working condition and ready for immediate use Compact, oil-free diaphragm vacuum pump designed for clean and quiet operation. Ideal for laboratory processes requiring consistent vacuum such as filtration, drying, and rotary evaporation support. Robust build ensures long-term reliability with minimal maintenance. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Nlsdpfxsy Ehpqo Aaaea

Condition: used, This listing is for Metrohm 852 Titrando Titration System The unit is in full working condition and ready for immediate use High-precision automated titration system designed for reliable chemical analysis. Ideal for research and quality control labs, offering accurate endpoint detection, user-friendly operation, and robust Metrohm engineering. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Njdpey Ehdzofx Aaaela Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Nedjxuqmnspfx Aaasla Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Nledpfx Aaoyapdqoaea Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Nodpfey Hdqajx Aaaela Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, This listing is for the Mettler Toledo Sevenexcellence + Printer The unit is in full working condition and ready for immediate use This advanced benchtop meter delivers precise pH, conductivity, and ion measurements with an intuitive touchscreen interface. Ideal for laboratory environments requiring accuracy, reliability, and seamless data handling with integrated printing capability. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Njdpfx Asy Dqgpoaajla • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for Peak Scientific Nitrogen Generator Corona 1010 + Corona compressor The unit is in full working condition and ready for immediate use Njdpfx Aajy Dp A Asasla Designed to provide a consistent, high-purity nitrogen supply for LC-MS applications. Compact and efficient, the Corona 1010 with integrated compressor ensures reliable performance and reduced reliance on gas cylinders in laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory