Used Microstep Mg for sale (918)

Condition: used, Edwards Truecut 10 x 3000mm Shear Capacity mild steel 10mm Capacity in Stainless Steel 8mm. Capacity in Aluminium 13mm. Powered backgauge Elgo readout Shadow line Wandering foot pedal Nwedpfx Abjzdicdsksh 1 x squaring arm 2 x support arms Rake adjustment Rear safety fencing

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Nwodezdgnzjpfx Abkoh Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Transport Width 2,180 mm

Condition: used, HPLC Waters Nedjzg Tzxepfx Abkswh The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, Grundfos CM3-4 A-R-G-V-AQQV F-A-A-N centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 0839, unused, 100% functional, scope of delivery as shown in the photos. Nsdpfjzg Sb Dex Abkswh

Condition: new, Grundfos CM3-2 A-R-I-V-AQQV centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 2246, unused, 100% functional, scope of delivery as shown in the photos. Njdpozg Sbwsfx Abkjwh

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Nwedszdpc Tepfx Abkjh Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 0-201-71-5926, For sale as part of the insolvency proceedings 5-axis CNC woodworking center Homag Centateq P-500 Profi BMG511/60/15/F/A, Year of manufacture 2021, with Homag control system, Widescreen TFT monitor Dell and accessories - Main usage approx. 5,200 hours - Secondary usage approx. 2,910 hours - Total operating time approx. 11,960 hours - Operating time approx. 12,050 hours Please contact us to arrange a viewing appointment. (The properties described here in the order confirmation (attachment) only provide an overview of the delivery at the time. The machine will be sold as is at its current location, as it was viewed or could have been viewed.) Nwodpfx Abezfyxnjkjh Stair design software will not be sold with the machine. To the best of our knowledge (without guarantee), the internal HOMAG WoodWop program is installed on the machine and can be continued to be used with licenses purchased from HOMAG.

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm Nodpfx Aboc H S D Iekswh -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg

Condition: not inspected (used), Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ Nwodpfozhcg Hox Abkjh 1 Chain changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- Length: 11.1 m, Width: 6.215 m, Height: 3.1 m Machine supplied WITHOUT processing tools. (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) Note regarding transport securing (HOMAG BMG 511): -----...

Condition: excellent (used), Servodrive Manufacturer: Harmonic Drive Serial number: 3197MG12137 Data: see image. Nwjdpfxjfd Enle Abkjh

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS HYDRAULIC MOVEMENT Nwedpfx Aey Nmg Ajbkjh DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: excellent (used), color: orange, lifting height: 25,500 mm, Year of construction: 2007, operating hours: 9,654 h, Drivetrain Make of engine: Volvo Nwedpfx Aoy Amyvebkjh Weights Empty weight: 18.000 kg Functional Lifting capacity: 25.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2025-12-16 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Ecopower MGI 25 Telescopic Crane * 2007 * 9,654 operating hours * Diesel drive * 4x4x4 steering * Pick and Carry function up to 9,500 kg * 25,000 kg lifting capacity * 18,000 kg own weight * equipped with jib * TUV inspection valid until December 2026 * TCVT inspection valid until December 2027 * Agricultural vehicle 25KM * Includes maintenance history and documents

Condition: new, Grundfos CR16-80 A-F-A-BUBE centrifugal pump, B33500008P10140, with MG132SC2-38FF265-C motor, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Nwodpfx Abszc Tw Tsksh

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Nwjdpfx Absqx Sxaskeh

Condition: used, machine/vehicle number: 1384A, mileage: 26,674 km, power: 179 kW (243.37 HP), first registration: 07/1985, fuel type: diesel, overall weight: 16,393 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 90 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Nwjdpfxoqx S Aao Abkjh

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,225 kg, first registration: 01/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,450 mm, total width: 2,275 mm, total height: 1,978 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 19731 Subject to errors and prior sale! ---- OPTIONAL EQUIPMENT * Windows: Fixed side windows, 2nd row, right and left, including sliding door, right and left * Heated fixed rear window - Interior mirror - Rear window wiper Nwodpfx Abjwb Nz Tekjh * KMP conversion: Loading ramp 2200x1000 (folding - anti-slip - gas spring - side overrun protection - max. load 350 kg) - MobileFlex system floor - Linea seat (single seat - integrated headrest - right armrest - central base with quick-release fastener and transport wheels) - 2-point automatic diagonal shoulder belt ADDITIONAL EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area * Driver's side airbag * Anti-lock braking system with electronic brake-force distribution * Electrically adjustable and heated exterior mirrors * Battery: H7 AGM single battery * Overhead console * Double rear door (without window), opening 90° to 168° Unlockable * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/quick-up function for driver's side * Electronic parking brake * Ford Power Start function (keyless starting) * Heated windshield * Floor mats: Rubber floor mats in front * Grab handle, driver and passenger side * Lockable glove compartment with lid * Interior lighting, front * Automatic climate control * Front headrests * 55 l fuel tank * Load compartment lighting (LED) * Plastic steering wheel * Small center console * eCall emergency call system * Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Drowsiness Warning - Traffic Sign Recognition System - Wrong-Way Driver Warning - Lane Keeping Assist including Lane Departure Warning - Parking Assist System Front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Full-surface hubcaps * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Windshield wipers with rain sensor * Headlights with LED low beam - including high beam assist * Sliding rear door, right * Power steering * Seat belts - Seat belt tensioners and force limiters at the front - Driver's seat belt warning system * Seat package 11A - Driver's seat, 4-way manually adjustable - Passenger double seat with through-loading hatch, fixed - Lumbar support for driver - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Partition (metal) without window * Recirculation heating * Tie-down eyes 8 * Immobilizer * Heat-insulating glass, light tint throughout * Central locking with remote control - additionally with a second key, with remote control ... and much more.----First owner. German version. Errors and prior sale excepted. 2-year factory warranty from the first registration date (extendable upon request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you! Since, despite ongoing checks, a deviation of the vehicle from the above description cannot be ruled out, we would like to point out that the vehicle description serves only as a general identification of the vehicle and does not constitute a warranty in the sense of sales law. The sole determining factor is the agreement.

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,225 kg, first registration: 01/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,450 mm, total width: 2,275 mm, total height: 1,978 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 19732 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT Nwodpfx Abszhhuijkeh * Windows: Side windows, 2nd row, fixed, right and left incl. sliding door right and left * Rear window, heated, fixed - Interior mirror - Rear window wiper * KMP conversion: Loading ramp 2200x1000 (foldable - non-slip - gas spring - side impact protection - maximum load 350kg) - MobileFlex system floor - Linea seat (single seat - integrated headrest - right armrest - central foot with quick-release and transport rollers) - 2-point automatic diagonal shoulder belt FURTHER EQUIPMENT * 2-stage release for passenger compartment and cargo area * Airbag, driver's side * Anti-lock braking system with electronic brake force distribution * Exterior mirrors, electrically adjustable and heated * Battery: H7 AGM single battery * Overhead console * Double-wing rear door (without window), unlockable from 90° to 168 degrees * ESP - Hill start assist - Safety brake assist - Traction control * Power windows, front, electric - with quick-down/-up function for driver's side * Parking brake, electronic * Ford Power Start function (keyless starting) * Windshield, heated * Floor mats: Rubber floor mats, front * Grab handles, driver's and passenger's side * Glove compartment with lockable lid * Interior lighting, front * Automatic climate control * Headrests, front * Fuel tank 55 l * Cargo area lighting (LED) * Steering wheel made of plastic * Center console, small * Emergency call assistant eCall * Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning - Lane Keeping Assist incl. Lane Departure Warning - Park Pilot system, front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Wheel covers, full-surface * Tire repair kit * Tire pressure monitoring system * Wheels: Steel wheels 6.5 J x 16 with 215/65 R 16 tires * Windshield wipers with rain sensor * Headlights with LED low beam - incl. high beam assist * Sliding door, rear, right * Power steering * Seat belts - Seat belt pretensioners and force limiters, front - Warning system for driver's seat belt not fastened * Seat Package 11A - Driver's seat, 4-way manually adjustable - Passenger double seat with pass-through flap, fixed - Lumbar support for driver - Fabric upholstery Plus Style, seat center panel in Black Onyx, rest in Ebony * Start-Stop system * Partition (metal) without window * Recirculation heating * Lashing eyes 8 * Immobilizer * Heat-insulating glazing, light tint, complete * Central locking with remote control - additionally with a second key, with remote control ... and more.----1st owner. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from date of first registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing also possible without down payment! Do you have any further questions? We will be happy to advise you! Although, despite existing controls, a deviation of the vehicle from the above description cannot be ruled out, we would like to point out that the vehicle description only serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The only thing that matters is the

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Nedpfxjy Nqcbo Abkewh Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 23626

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm Njdpfx Absy A Tdnskowh z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: ready for operation (used), SEW-Eurodrive KH37/TDT80K4/BMG/TF motor SN 01.1298591701.0001.09used, minor signs of wear, 100% functional, scope of delivery as per photos Njdpfx Aboqp Ahcjkswh

Condition: new, Baldor BSC1005-24 drive controller ID: 21137B SN: 1295MG24816 – Input: 320VDC / Output: 0-250VAC, unused in opened original packaging, 100% functional, delivery as per photos Nwsdpfxsy Npxbj Abkoh

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C Serial number: 1995MG27553, used, in good condition, 100% fully functional, scope of delivery as per photos Njdoy Npzpopfx Abkowh

Condition: ready for operation (used), Baldor DBSC1005-24-AAAW servo drive INPUT AC230V ID/No: 27992G serial number: 1698MG09743, used, in good condition, 100% functional, delivery as per photos. Nwodpfx Aboy Np Agskoh

Condition: ready for operation (used), Baldor DBSC1005-24-AAAW servo drive INPUT 3AC230V ID/No: 27705D serial number: 1397MG05202, used, in good condition, fully functional, scope of delivery as shown in the photos Nwjdpoy Np D Defx Abkjh

Condition: ready for operation (used), Siemens 1FT7067-7SF71-1MG3 synchronous motor SN:YFA822360202001, used, in good condition, 100% operational, scope of delivery as shown in the photos. Nedpfxex Du Ihe Abkewh