Used M & P Engineering Large M & P Onion Peeler Machine for sale (118,122)

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive Dkodpfxjzlg Iie Akrsu -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） -Fabric GSM: 9-60 g/m2 -Installed power: Around 1500KW

Condition: used, all stainless steel belt width 600 mm mobile Dodjz Ahd Hjpfx Akroku mesh width 5 mm adjustable speed with air knives with batter pump

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors Djdpszv Niwjfx Akrsku – Sectional heating plate – Built-in compressor

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 Dodpfx Aoymahyskroku The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, functionality: fully functional, Two units available The Velati spreading machine, constructed entirely from stainless steel, is a specialized piece of equipment for salami production, designed to pre-mix and separate the components of each minced meat type. Thanks to the subdivision and uniform separation between fat and lean portions, significant improvements in the visual quality of the final product can be achieved. The spreading machine is continuously fed by a conveyor belt at the top. From there, gravity channels the product into a passage containing fixed and rotating pegs that, through centrifugal action, separate the grains of the minced product, making the distinction between lean and fat more apparent. This allows for an optical enhancement of the final slice, ensuring the product's homogeneity is visibly recognizable. Dkedpfx Aow E Riyokrju The Velati vertical spreading machine is available in various configurations: one version discharges directly onto a conveyor belt for continuous operation, and another version attaches directly to the grinder outlet, known as the AG spreading machine.

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Dksdpfxet Evzrj Akrou Manufacturer - Sorma Group. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm -Warp Tension Control Dkodszb Uzwopfx Akrou -Automatic squeeze pressure control With all required accessories.

Condition: used, functionality: fully functional, Manufacturer: Teca-Print AG Model / Type: 350 S Machine type: Pad Printing Machine Serial / Fab. No.: 8459802 Electrical supply: 220 V Frequency: 50 Hz Dkedpfow Hbd Rex Akrju Wiring diagram / Schema No.: 833500 Pneumatic system with pressure regulator Adjustable machine controls Mechanical worktable Emergency stop Integrated electrical control cabinet Available immediately! Ready for transportation!

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Dksdpoq U N T Rsfx Akrju Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: used, functionality: fully functional, APS-10 Automatic tea bag packing machine fully functional equipment available. The equipment is designed for automatic packaging of bulk materials, for example black teas, fruit teas, etc. DEVICE CONSTRUCTION The main components of the sachet machine are: Unwinder for double packaging material Guide roller system Sample wheels for welding Cutting system Cross cutting system Bundling system (10, 20, 30, 50-100 each) Volume feeder Double belt conveyor PACKAGING MATERIAL Thermal sealing filter paper: 16g/m² Width: 490 mm Dimension max: 500 mm Core D: 76mm Dkodpeyn Ibkjfx Akrou TECHNICAL AND OPERATIONAL DATA Overall dimensions (W x L x H): 1500mm x 1600mm x 2100 mm Tea bag size 48 x 65 mm Capacity: from 500 to 1000pcs/minute depending on the material. Working lanes: 10 rows Dosage: 1g to 2g Direct operation: one person. Sachet collection depending on the operating speed of the device: from 2 to 3 people Power supply: electric: 3 x 380V50Hz Electricity demand: 5kVA Pneumatic: 6 bar Air consumption: approx. 0.3m3/h

Condition: used, Year of construction: 1997, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Tool magazine, Digital readout - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dodpfx Ajy Uv U Hekrsku Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, For sale: 2 units of professional spiral dough mixers AYPEK AYP-MIX 70, suitable for bakeries, restaurants, and food production. These industrial machines are designed for intensive use and provide consistent, high-quality dough mixing. The mixers are in good working condition and ready for operation. Dkjdpfx Aksyybkksreu Available as a set or individually.

Condition: new, Year of construction: 2025, Automatic shrink wrapping machine for packaging products in shrink film with shrink tunnel. The machines are widely used in the pharmaceutical, food, cosmetics, stationery, electronics, and daily goods industries. Dkodpsyilf Tjfx Akrsu Very easy to operate machine. Very large working area. Length + height max 600mm Width + height max 500mm Max height 150mm Year of Production: 2025 Price for the set (wrapper + tunnel): 48,000 PLN net. Video link: youtu.be/WbgBJRHyAmk Katowice Packaging line Automatic packaging machine Packaging automaton Automatic wrapper Cellophane machine Automatic film wrapping machine

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors Dkjdjurhx Nspfx Akreu C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Dksdpfx Akoymacwsrou Tools: Rotating hammers

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. Dedpfx Akjv Sa I Tsrjku It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Dksdpfx Aext Ib Hekreu

Condition: used, This listing is for the H+P Komet Variomag Poly 15 Magnetic Stirrer The unit is in full working condition and is ready for immediate use Dsdpfxexl E Izo Akroku The Variomag Poly 15 is a precision-engineered, 15-position direct-controlled magnetic stirrer built for laboratory applications requiring simultaneous mixing of multiple samples. Developed by Variomag-USA (2mag GmbH, Germany), this stirrer is ideal for chemical, microbiological, biotechnical, and medical environments. Core Features Direct-Controlled Operation: Offers simple, immediate speed control for easy use. Inductive Drive: Wear-free and low-maintenance magnetic induction ensures quiet, long-lasting operation. Digital Speed Control: Microprocessor-based for consistent performance, with memory recall for repeated tasks. Soft Start Function: Prevents splash and ensures gentle acceleration to protect magnetic coupling. Simultaneous Stirring: Ideal for processing multiple Erlenmeyer flasks or beakers at once—up to 15 × 250 mL or 6 × 1 L vessels. Typical Applications The POLY 15 is designed for a wide range of laboratory tasks, such as: Growing micro-organisms (e.g., aeration and culturing bacterial cultures) Dissolving nutrient media and solids Preventing settling of suspended particles Performing titrations General liquid mixing in R&D, pharma, food science, and education labs

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was last used with aluminum powder AISi10MG. The 3D printer has already been dismantled by the manufacturer and was fully functional up to that point. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Trumpf TruPrint 5000 with the options Powder Bed Monitoring and Melt Pool Monitoring included. Filter system. Accessories: 2 pcs. build cylinders 3 pcs. dosing cylinders 1 pc. overflow container, used 1 pc. overflow container, new Manuals 4 pcs. heat exchangers, new 2 pcs. Easy Filter, new 3 pcs. NTRON SIL02 oxygen analyzer + sensor, new 1 pc. oxygen sensor, new and much more, such as seals, etc. Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial series production. With features such as an optional 500 °C preheating function and the full-field multi-laser system with three 500-watt TRUMPF fiber lasers, you are well-equipped for highly demanding industrial applications. The machine quickly and reliably produces high-quality components from various metallic materials – and meets the high quality requirements in tool and mold making, also through 3D printing on preform blanks, in the aerospace industry, and in medical technology. Optionally, the entire process chain can take place under a protective gas atmosphere: sieving, printing, cooling, and depowdering. TruPrint 5000 Dodpevu Syysfx Akroku Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating > 200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 No warranty claims accepted. Maintenance and service are not offered.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Dedpfx Aeyzm S Aokrsku

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking Dsdpfx Aoyy Rn Sjkreku * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Year of construction: 2021, condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Dkedpfsf H Azgsx Akrju Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Dsdpfxoyma Ads Akroku Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Djdpfx Akeyzhl Djrsku

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Dksdpfx Asz D Aqbskrou Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives