Used Ksb Etabloc-G 50-200/852.2 for sale (69,936)

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Ibsdpfsuaq D Aox Afujc

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Ibjdpswlkb Njfx Afujc

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: Ijdjy Hkd Hopfx Afuebc ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2013, Airpress APK-G 50/500 Compressor Machine mounted on 500L tank, serviced and equipped with air dryer. Technical specifications: Capacity: 1.9 m3/min (1900/min) Motor power: 15 KW Pressure: 10 bar Iedpey Idlyefx Afujbc Operating hours: 4427 h Year: 2013 Net price: 13,700 Gross price: 16,851 The compressor is fully functional, service support provided. Video below

Condition: ready for operation (used), Heidelberg Finishing Heidelberg TAS350 section feeder -2005 Ibsdpfxeir A Nge Afusc

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - Low loading platform - Supports - 50mm insulated wall Net: €10,882.35 / Gross: €12,950.00 Article number: VES227502023.01 Technical data: • Brand: Vezeko • Model: VEA 27.50 • Vehicle type: Sales trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 500 x 200 x 235 cm • External dimensions (L x W x H): 659 x 215 x 288 cm • Loading height of the floor: 41 cm • Permissible total weight: 2,700 kg • Tare weight: 1,182 kg • Payload: 1,518 kg • Chassis: High loader (wheels under the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Overrun device from ALKO • Floor plate made of multiplex • PVC covering on the floor • Side walls made of very solid steel sheet sandwich, 50 mm thick • Outer layers of the box body made of galvanized and additionally powder-coated steel • Outer layer silver and inner layer white • Sales flap on the right side • Door in the front wall, lockable from inside and outside • Footboard on the drawbar • Support wheel • 4x scissor supports mounted including crank • Reverse assist • Internal, built-in wheel arches • Plastic fenders • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are protected by copyright!! Ibedpozy Algefx Afuoc Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop - for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Ibsdez Sli Sepfx Afuoc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The Mondini De/GS 200 type cheese spreader shown in the picture is for sale. The machine applies grated cheese like a "waterfall" onto the conveyor belt passing underneath. The application width can be adjusted up to approx. 15 cm widths. Ijdpfouwrr Ssx Afuobc Infeed conveyor, and conveyor not included.

Condition: new, Hydraulic piston diaphragm pump, used Type: REWA/Abel HMD-G-50-0500 Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Ibjdpfx Afsib A Dwjuec Motor: 30 KW, 400 V, 50 Hz, 1500 rpm,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,786 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,680 mm, fuel type: electric, mast type: triplex, construction height: 2,290 mm, fork carriage width: 1,150 mm, fork length: 2,000 mm, empty load weight: 5,293 kg, total length: 2,350 mm, drive type: Elektro, construction width: 1,200 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Ibodpfx Asz Ifr Njfusc Front tire size: 2 x 23x9-10 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2018 Dual auxiliary hydraulics, integrated fork positioner with side shifter Kaup 2T466BI, full cabin, heater, Blue Spot, battery, 2x front work lights, 2x rear work lights.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Ibsdpfx Afey Hkgbeusc Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, CORMAK BS150-200 Belt Grinder is an industrial machine designed for intensive operation in manufacturing plants, metalworking workshops, and tool rooms. This metal belt grinder combines high grinding efficiency with an effective dust extraction system, providing safety, cleanliness, and comfort during everyday use. Its robust steel construction and large work table ensure stability and precision even when processing large components. Main advantages of the machine Two belt speeds (15 / 30 m/s) – allows adjustment of the grinding speed to the type of material and the machining process (rough grinding or finishing). Integrated dust extraction system – provides a clean and safe working environment without the need for external extraction units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large work table (480 × 150 mm) – enables comfortable handling of larger workpieces. Stepless grinding angle adjustment – allows precise positioning of the belt according to the processed component. Quick belt replacement system – reduces downtime and improves work efficiency. Isdpfjvu Uqnex Afujbc Design and technology The stationary CORMAK BS150-200 belt grinder is based on a welded steel frame, providing high rigidity and resistance to dynamic loads. The integrated dust extraction system, equipped with a 0.37 kW motor and two Ø100 mm extraction ports, ensures efficient removal of grinding dust and particles. The main 3.0 kW motor provides sufficient power for demanding machining operations and intensive industrial use. Precision and work efficiency Thanks to the use of a 150 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area, reducing processing time and increasing efficiency. Two operating speeds allow quick switching between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the entire working cycle, improving grinding stability and abrasive belt life. Applications The CORMAK BS150-200 metal belt grinder is used in: manufacturing plants processing steel, stainless steel, and aluminium, welding and metalworking workshops, surface preparation and finishing operations, grinding edges, weld seams, and flat surfaces. Standard equipment Stable steel base with tilt adjustment Abrasive belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection guard Adjustable protective shield Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 15 / 30 m/s Motor speed 1400 / 2800 rpm Main motor power 3.0 kW Dust extraction motor power 0.37 kW Machine dimensions (L × W × H) 1000 × 650 × 1150 mm Weight 117 kg Power supply 400 V Dust extraction ports diameter 2 × Ø100 mm Work table dimensions 480 × 150 mm Chip collection bag diameter Ø320 mm Chip collection bag length 650 mm

Condition: used, Second-hand machine Condition: as new Specifications and technical details to follow Ibodpfx Aezk Nkkofujc

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Ibsdsd Eyl Nepfx Afujc Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed fitting: on the suction and pressure sides, incl. pressure reducer, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar in design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-running safe. The pump's flow rate is energy-efficiently controlled by a speed-controlled drive, depending on the delivery pressure, using a frequency converter. We also offer our piston diaphragm high-pressure pumps in a special design for tunnel construction. Do you have specific requirements? Please ask us.

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (charging pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction-side connection flange: DN 125 PN 16 DIN 2633 Pressure-side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed fitting: on the suction and pressure sides, incl. pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Isdpfod Ey Riox Afusbc Photo: similar in design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-run safe. The pump's flow rate is efficiently controlled by a speed-controlled drive, depending on the delivery pressure, by means of a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special tunnel construction version. Do you have specific requirements? Please contact us.

Condition: used, System: hydraulic piston membrane pump, used Ibedpfx Ajib A Eqjfuec Type: REWA/Abel HMD-G-50-0500 Article no.: A51-288 Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, Version: with control cabinet and frequency converter

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Ibedjzmf Iqspfx Afujc Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: simplex, construction height: 3,300 mm, fork carriage width: 1,900 mm, empty load weight: 22,100 kg, total length: 3,800 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift – internal combustion engine Isdez Ewd Eopfx Afujbc Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this MAXEIN DWB 200/500G. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Iedpfozw H Hijx Afujbc Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, Technical details: turning diameter over bed: 350 mm turning diameter over support: 200 mm turning length: 560 mm centre height: 170 mm spindle bore: Ø 32 mm range of revolution per miute: 36...1.800 / 8 step U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 Ibjdpfxevadd Io Afujc tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Working stroke longitudinal support=580mm; plan support=170mm; top support 130mm; -Workpiece support via 3-jaw chuck Niles Ø 160mm, speed 2,800 rpm. -Tool holder quick change steel holder Multifix. Equipment: Cooling water pump 4 pieces machine feet Copying device *

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics Ibjdevw R Ihepfx Afujc + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: excellent (used), mileage: 268,805 km, power: 331 kW (450.03 HP), first registration: 09/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 7,750 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: other, emission class: euro6, number of seats: 2, total length: 10,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electric window regulation, retarder, traction control, = Additional options and accessories = - Additional steering axle - Air conditioning (automatic) - Power take-off (PTO) - Sun visor = Remarks = Crane Hours: 5860 uur Number of hydraulic extensions: 8+6 Number of manual extensions: 1 Number of support legs: 4 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Rotator: × Very nice Scania G450 equipped with a Palfinger 92tm crane! In addition to the options already mentioned, it has: -Retarder -Automatic -Air conditioning -8x4 triple -Palfinger PK92002-SH-G -8x hydraulically extendable -PJ125 E Flyjib -6x Hydraulically extendable -1x Hand part etc etc This truck is ready for its next job! = More information = General information Cab: half sleeper Registration number: BD-462-F Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 8000 kg Weights Empty weight: 26.840 kg Carrying capacity: 9.260 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger PK92002-SH-G Plus Jib 125e, year of manufacture 2016 Maintenance APK (MOT): tested until 03/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. Ibodpfx Afjzucwlsujc We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm Ibodpsu Ix Hqsfx Afujc -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: used, functionality: not functional, For sale: a three-phase electric motor, KSB, powered by WEG, model AL132S-02, with foot mounting and a mounting flange. The motor has been inspected and is in full working order, ready for use. Technical specifications: - Power: 5.5 kW - Voltage: 400 V Δ / 690 V Y - Frequency: 50 Hz - Rotational speed: 2930 rpm at 400 V - Rated current: 10.0 A / 5.81 A - Efficiency class: IE3 - Protection class: IP55 - Insulation class: F - Duty type: S1 – continuous operation - Ambient temperature: up to 40°C - Date of manufacture: 02.05.2016 Iodpsz Sy Rcsfx Afuebc - KSB part number: 01629115 Condition: used, fully functional. Visible signs of use.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 7570 € 146.1 € 50 to 130 mm 27/13 mm 23 1/min 3 kW Isdpfsynm Nyjx Afuebc 1100 mm 900 mm 1550 mm 355 kg portable, hydraulic punching machine table with gauge foot pedal user manual in German or English