Used Ksb Eso Rvp-S32-125 2/12Rh for sale (78,494)

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Bdodpfxjcnw U Ds Afmef Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: ready for operation (used), KSB ETACHROM BC block pump, serial number: 6-9531327631 + 1LA7096-2AA11-ZX66 three-phase motor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodpfx Aoi D Iz Rsfmjdf

Condition: new, Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number B7952, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bdedpfji Ec Dujx Afmjf

Condition: new, Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number Z6653, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bdedpfx Aei Ec D Aefmef

Condition: new, Siemens 6FC5203-0AD27-0AA0-S32 control panel, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bdodpfx Aji Edzqofmsf

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Bodpfxoi Eaabj Afmedf

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number X5017, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Bdjdpfxoi Ec Dxo Afmef

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Bdodpfx Afex U Ectjmof Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Bedpfx Asy H Akrofmjdf Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Cannot be tested. Bdjdpfx Aezqux Tofmef Collection only.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° Bdedpfszimcbox Afmjf - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. Bdodpfezk D Nuox Afmjf • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodjzh Sc Rspfx Afmedf

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm -Bar capacity 34mm -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center -Work light Bsdpfx Ajzpg Uqjfmjdf -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Bjdpfx Afsfbbqhsmodf

Condition: used, mileage: 125,034 km, power: 302 kW (410.61 HP), first registration: 12/2018, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 16,550 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: retarder, color: silver, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking heater, soot filter, traction control, trailer coupling, Volvo FM 410 BDF E6 - BDF body - Automatic transmission - Active cruise control - ABS/ASR/ESP - Lane keeping assist - Air conditioning - Full air suspension - Lift axle - EURO 6 - Trailer coupling - Tires: 315/70R22.5 In very good condition, German vehicle. Export price. Volvo FM 410 BDF E6 - BDF body - Automatic gearbox - Active cruise control - ABS/ASR/ESP - Lane keeping assist - Air conditioning - Full air suspension - Lift axle - EURO 6 - Trailer coupling - Tires: 315/70R22.5 In very good condition, German vehicle. Export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: Bdjdpfx Afozmai Aomsf - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: excellent (used), Indexable milling cutter (28233) Type Gigacut AW 125-13-8 Bjdpfehzt E Tsx Afmodf Diameter 125 mm Arbor hole 40 mm Weight 2.5 kg

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector -Manufacturer: wöhner, NH fuse base with touch protection, 12 pieces, unused, original packaging -Type: NH Gr. 00 125 A -Quantity: 2 boxes of 12 items each available -Price: per set -Cardboard dimensions: 300/165/H115 mm Bdodpfsyg D S Asx Afmof -Weight: 1.9 kg/set

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Bsdju T Tqrepfx Afmjdf -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 9 pieces -Prism width: 100 mm -Dimensions: 9x 240/125/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 240/250/H190 mm -Total weight: 83.1 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch Bdjdpfx Afjqv Hqgomjf -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 920 mm Bdjdpfx Asgnzxfsfmsf -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor Bdodpogul S Rjfx Afmjf -Length: 147 m -Price: complete -Dimensions roll: Ø 900 x 485 mm -Weight: 25 kg

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer: Bahmüller, thread cutting chuck with keyless chuck -Type: 18.6012 - Bahmüller SK40x36 A 125 Bedpfxjxdxb Es Afmsdf -Chuck: Albrecht 1/8-5/8" / 3-16 mm -Dimensions: Ø 63 x 350 mm -Weight: 4.4 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm Bodpfx Aoxrz Auofmedf -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece Bdodpfexwvh Asx Afmsf -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.